{"title":"Crane lighting","description":"","products":[{"product_id":"pl3-ledwl-crn-blu","title":"25W Blue Crane LED Warning Light - 2250 Lumens - 9-60V DC - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-BLU LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Blue LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 6\"-H x 3.91\"-W x 3.59\"-D\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 9-60V DC\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Blue\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: U-bracket style trunnion with tension bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-BLU Round Blue LED Light Fixture is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw, 50,000 hour service life, and 9 to 60 volt compatibility providing operators with a versatile and powerful warning safety light.\nThe LEDWL-CRN-BLU Round Blue LED light from Larson Electronics produces 2250 lumen of sharp blue light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt blue LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. This particular unit is ultra compact at only 6\" tall by 3.91\" wide by 3.36\" deep, which makes it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-BLU addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-BLU to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (347-480V AC and 120-277V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting: The LEDWL-FKLT-BLU is suspended within a form fitting trunnion (yolk-type) mount. This trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1\/2-inch hole can be drilled.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38284697272501,"sku":"PL3-LEDWL-CRN-BLU","price":380.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-BLU.jpg?v=1629001379"},{"product_id":"pl3-gvp-48-1l-led-125vdc","title":"Larson 28 Watt Vapor Proof LED 4 Foot Light - 125V DC Mining\/Crane Lighting - 3500 Lumens - IP67 Waterproof","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics GVP-48-1L-LED-125VDC is similar to our popular explosion proof LED fixtures and provides an LED alternative to fluorescent fixtures that provides longer lamp life and higher performance. This single-lamp LED fixture produces more output and longer lamp life with impact\/vibration resistant features. The vapor proof LED light is ideal for applications such as ships, offshore applications, cranes, and mininig environments where 125V DC is availlable and a vapor proof fixture is required.\r\u003cbr\u003ePlease note that this unit is vapor proof and not approved for use in hazardous locations.\r\u003cbr\u003eThis four foot long, single-lamp LED fixture is ideal for operators seeking a top quality vapor proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The GVP-48-1L-LED-125VDC LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This fixture is equipped with one specially designed LED T8 style LED bulb which produces 3500 lumens with a color temperature of 5600K or 4500K. The GVP-48-1L-LED-125VDC, four foot long, single-lamp LED light fixture is designed for those who wish to replace or upgrade from fluorescent equipped fixtures and offers better light output and longer lamp life with reduced maintenance costs. Without a ballast and solid state LED light tubes, this fixture draws less than 1 amp of power while offering durability and versatility that common fluorescent fixtures cannot match.\r\u003cbr\u003eWe now offer our second generation LED tube lamps with this fixture which have increased this hazardous location light’s performance. This single lamp HAZLOC LED linear fixture is lighter in weight and produces more light than hazardous location fluorescent fixtures. The four foot long LED tube design bulbs included with this unit are rated at 50,000 hours of service life, which is over twice as long as standard T8 bulbs.\r\u003cbr\u003eWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included\r\u003cbr\u003eLEDT8-28W-V1\r\u003cbr\u003eLED lamps have a 50,000+ hour service life, both of which results in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eThe 28 watt LED lamp produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. The lamp produces 3,500 lumens at 62.5 lumens per watt. A four foot, single lamp T8 fluorescent light, with a combined total of 28 watts, draws 0.27 amps at 120 volts DC. This LED version of the same light, with a total of 28 watts, draws only 0.23 amps at 120 volts DC. The GVP-48-1L-LED-125VDC operates on 125V DC (direct current) and is not designed to operate on AC current from standard electrical systems.\r\u003cbr\u003eEnergy Consumption Comparison\r\u003cbr\u003eT5HO\r\u003cbr\u003eT8\r\u003cbr\u003eLED\r\u003cbr\u003eWattage\r\u003cbr\u003e54 watts\r\u003cbr\u003e32 watts\r\u003cbr\u003e28 watts\r\u003cbr\u003eAmp Draw @ 120V DC\r\u003cbr\u003e0.45 amps\r\u003cbr\u003e0.27 amps\r\u003cbr\u003e0.23 amps\r\u003cbr\u003eLamp Life Expectancy\r\u003cbr\u003e20,000 hours\r\u003cbr\u003e24,000 hours\r\u003cbr\u003e50,000 hours\r\u003cbr\u003eColor Temperature\r\u003cbr\u003e5000K \/ 4100K\r\u003cbr\u003e4100K\r\u003cbr\u003e5600K\r\u003cbr\u003eOperation cost per year\r\u003cbr\u003e$28.38\r\u003cbr\u003e$16.82\r\u003cbr\u003e$14.71\r\u003cbr\u003eThis unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. The GVP-48-1L-LED-125VDC light fixture comes with a multi-purpose mounting bracket that can be used for a direct surface mount or reversed and used for chain hanging the unit.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eMarine ships, offshore applications, cranes, mining spaces and anywhere a rugged and dependable fixture with high output, high efficiency, and 125V DC operation is needed.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eListing: United States - Canada\u003cbr\u003eDimensions:  49-3\/4\"L x 5-7\/8\"W x 4-3\/16\"H\u003cbr\u003eWeight:  5 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  125V DC\u003cbr\u003eTotal Watts: 28W\u003cbr\u003eTotal Lumens:  3,500\u003cbr\u003eLuminous Efficacy:  62.5 Lumens per Watt\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eColor Temp:  5600K, 4500K, 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  160°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -40° C to +65°C\u003cbr\u003eMounting:  Surface or Chain Standard\u003cbr\u003eWiring Hub:  1\/2\" NPT\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38284733677749,"sku":"PL3-GVP-48-1L-LED-125VDC","price":618.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GVP-48-1L-LED-125VDC-1_2c1f3478-bf86-4132-9d7f-cf14c4b03376.jpg?v=1611022478"},{"product_id":"pl3-gau-hb-150w-led","title":"160 Watt LED Crane Light - 21,600 Lumens - High Mast Lighting - Outdoor Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-HB-150W-LED LED Marine Application Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eLight Weight Aluminum Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 12.60\"L x 9.77\"W x 5.07\"D\u003c\/td\u003e\n\u003ctd\u003eInstant On - No Warm Up Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 13.3 lb\u003c\/td\u003e\n\u003ctd\u003e300 Watt Metal Halide Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60 Hz and 127-431V DC\u003c\/td\u003e\n\u003ctd\u003eLow Maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 150W\u003c\/td\u003e\n\u003ctd\u003eReduces Energy Consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 20,250 \u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 135 Lm\/W \u003c\/td\u003e\n\u003ctd\u003eUL1598 Rated for Wet Locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configuration: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003c\/td\u003e\n\u003ctd\u003eIdeal for Crane Lighting Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Expectancy: 50,000+ Hours \u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eColor Temperature: Cool White (5300K) or Warm White (4000K) \u003c\/td\u003e\n\u003ctd\u003eSuitable for Marine Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90% \u003c\/td\u003e\n\u003ctd\u003eAnti-Vibration Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics \u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Range: -40°C to +80°C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Materials: Die Cast Aluminum, PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Flat Surface Trunnion Mount U-Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Powder Coated Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 254px;\"\u003e\nThe GAU-HB-150W-LED LED Crane Light from Larson Electronics offers intense light output and is ideal for crane lighting, high mast lighting, light towers, marine\/wet locations, as well as industrial and outdoor lighting applications. Producing 20,250 lumens, the unit operates on 90-305V AC 50\/60 Hz and 127-431V DC without modifications. This IP67 waterproof rated light is mounted on trunnion brackets with anti-vibration components for superior stability.\nThe GAU-HB-150W-LED produces 20,250 lumens of high intensity light. Sixteen CREE® high output LEDs producing 1,265 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and crane lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nDurability: As well as unparalleled heat control, the GAU-HB-150W-LED offers IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. This unit can withstand rapid temperature changes of -40° Celsius to +80° Celsius and resist the ingress of dust, dirt and humidity. The housing is formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help this luminary achieve resistance to vibrations and is rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Each unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\nSuggested Applications: Crane lighting, marine and wet locations, elevated lighting, high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sports complexes, construction and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38284808061109,"sku":"PL3-GAU-HB-150W-LED","price":1646.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-150W-LED.jpg?v=1628905415"},{"product_id":"pl3-gau-hb-150w-led-ss","title":"160 Watt LED Crane Light - 21,600 Lumens - High Mast Lighting - Outdoor Rated - SS Brackets","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-HB-150W-LED-SS LED Marine Application Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eLight Weight Aluminum Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 12.60\"-L x 9.77\"-W x 5.07\"-D\u003c\/td\u003e\n\u003ctd\u003eInstant On - No Warm Up Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 13.3 lbs\u003c\/td\u003e\n\u003ctd\u003e300 Watt Metal Halide Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60 Hz and 127-431V DC\u003c\/td\u003e\n\u003ctd\u003eLow Maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 150W\u003c\/td\u003e\n\u003ctd\u003eReduces Energy Consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 20,250 \u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 135 lm\/w \u003c\/td\u003e\n\u003ctd\u003eUL1598 Rated for Wet Locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configuration: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003c\/td\u003e\n\u003ctd\u003eIdeal for Crane Lighting Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Expectancy: 50,000+ Hours \u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temperature: Cool White (5300K) or Warm White (4000K) \u003c\/td\u003e\n\u003ctd\u003eSuitable for Marine Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90% \u003c\/td\u003e\n\u003ctd\u003eAnti-Vibration Mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Temperature Range: -40°C to +80°C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Materials: Die Cast Aluminum, PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/16\" Stainless Steel Trunnion Bracket w\/ Rubber Vibration Isolator Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Powder Coated Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 254px;\"\u003e\nThe GAU-HB-150W-LED-SS LED Crane Light from Larson Electronics offers intense light output and is ideal for crane lighting, high mast lighting, light towers, marine\/wet locations, as well as industrial and outdoor lighting applications. Producing 20,250 lumens, the unit operates on 90-305V AC 50\/60 Hz and 127-431V DC without modifications. This IP67 waterproof rated light is mounted on stainless steel trunnion brackets with anti-vibration components for superior stability.\nThe GAU-HB-150W-LED-SS produces 20,250 lumens of high intensity light. Sixteen CREE® high output LEDs producing 1,265 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and crane lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nDurability: As well as unparalleled heat control, the GAU-HB-150W-LED-SS offers IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. This unit can withstand rapid temperature changes of -40° Celsius to +80° Celsius and resist the ingress of dust, dirt and humidity. The housing is formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help this luminary achieve resistance to vibrations and is rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: This unit features a 3\/16\" stainless steel mounting trunnion bracket with rubber bushings for vibration isolation. The stainless steel material of the mounting trunnion bracket will stand up to moisture exposure without rusting. The mounting system is equipped with rubber vibration isolator bushings for anti-vibration benefits and extra stability. \nSuggested Applications: Crane lighting, marine and wet locations, elevated lighting, high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sports complexes, construction and more.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MV.\n5. Retains 70% lumen output after 80,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. 3\/16\" stainless steel mounting trunnion bracket with rubber vibration isolator bushings. \n8. Low profile - Light weight \n9. 20,250 Lumen output from only 160 watts\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000+ hours lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions. \n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38284808290485,"sku":"PL3-GAU-HB-150W-LED-SS","price":4828.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-150W-LED-SS.jpg?v=1628905414"},{"product_id":"pl3-gau-hb-500w-led-ss-480v","title":"500W LED Crane Light - Marine Applications - 480V - 60,990 Lumens - Stainless Steel Bracket - UL1598","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-HB-500W-LED-SS-480V LED Marine Application Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eLight Weight Aluminum Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 22.92\"L x 14.51\"W x 6\"D\u003c\/td\u003e\n\u003ctd\u003eInstant On - No Warm Up Times\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 500W\u003c\/td\u003e\n\u003ctd\u003e100,000+ Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 60,990 \u003c\/td\u003e\n\u003ctd\u003eLow Maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temperature: 4000K \u003c\/td\u003e\n\u003ctd\u003eReduces Energy Consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: 70 \u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Multi- 347-480V AC, 50\/60Hz\u003c\/td\u003e\n\u003ctd\u003eUL1598 Rated for Wet Locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 1.40 Amps @ 347V, 1.00 Amps @ 480V\u003c\/td\u003e\n\u003ctd\u003e3\/16\" Stainless Steel Mounting Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 122 Lm\/W \u003c\/td\u003e\n\u003ctd\u003eRubber Vibration Isolator Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Wide Flood Pattern\u003c\/td\u003e\n\u003ctd\u003eIdeal for Crane Mounting in Wet Locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Die Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003eIdeal for Marine Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Borosilicate Prismatic Glass\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 3\/16\" Stainless Steel Bracket w\/ Rubber Vibration Isolator Bushings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 52 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp Rating: -40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 254px;\"\u003e\nThe GAU-HB-500W-LED-SS-480V from Larson Electronics is a Heavy Duty LED Light Fixture that makes an ideal light for outdoor cranes including cranes that are located in wet areas or used for marine applications. This LED light offers operators superior lighting output of 60,990 lumens and extreme ruggedness and durability with a UL1598 listing for wet locations. LED technology and light weight design makes this lamp an excellent energy efficient upgrade option for bulky and high maintenance cost fixtures. The durable die cast aluminum construction makes the GAU-HB-500W-LED-SS-480V a durable lighting option for large outdoor cranes in marine applications as well as other high mounting locations in wet locations and marine areas. The included stainless steel mounting bracket offers operators the peace of mind to know that once this LED light is installed it will stay secure and free of the corrosion that marine environments and wet locations can quickly cause on mounting brackets made from lower quality materials. The GAU-HB-500W-LED-SS-480V operates on voltages ranging from 347-480V AC while drawing 1.40 amps @ 347V and 1.00 amps @ 480V.\nThis 500 watt LED marine location crane light fixture provides 60,990 lumens of high quality light while drawing only 500 watts and is ideal for use on cranes, high elevation mounting in wet areas, marine locations and anywhere an effective and efficient high mounting marine application lighting solution is needed. A borosilicate prismatic glass lens protects the LED light assembly and the die cast aluminum body reduces weight compared to larger metal halide and high pressure sodium fixtures. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 100,000 hour rated lifespan with 80% lumen retention. A 52 lbs weight, 3\/16\" stainless steel mounting bracket and low profile make this unit an attractive and energy efficient alternative to larger and heavier older light fixtures and requires less hardware to install. The included rubber vibration isolator bushings for the mounting bracket minimize any effect that the vibrations created during crane function and use could potentially cause.\nThe GAU-HB-500W-LED-SS-480V features a grey housing that is powder coated for extreme durability. The LED modules in this LED light are have an IP66 waterproof rating and the entire fixture is UL1598 listed for wet locations.\nVoltage: This light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. This high mounting marine application and crane LED light fixture is IP66 rated, dust-proof, and the entire fixture is UL1598 listed for wet locations including marine areas.The cast aluminum body,LED lamp and stainless steel mounting bracket with rubber vibration isolator bushings give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis LED crane light is multi-voltage capable and can be operated with 347-480V AC, 50\/60Hz without any need for a special ballast. The aluminum body and LED luminaries give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED light fixture produces 60,990 lumens of light with a color temperature of 4000K and a color rendering index of 70 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The LEDs used in this light use less energy and create less heat which reduces energy costs by lowering the amount of electricity needed to both illuminate and cool large areas. The GAU-HB-500W-LED-SS-480V features a 3\/16\" stainless steel mounting bracket with rubber bushings for vibration isolation. The stainless steel material of the mounting bracket will stand up to moisture exposure without rusting.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nSuggested Applications: The GAU-HB-500W-LED-SS-480V is an ideal lighting solution for cranes and other high elevation mountings that are located in marine areas and other wet locations.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MV.\n5. Retains 80% lumen output after 100,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. 3\/16\" stainless steel mounting bracket with rubber vibration isolator bushings. \n8. Low profile - Light weight \n9. 60,990 Lumen output from only 500 watts\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 100,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions. \n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38284817301685,"sku":"PL3-GAU-HB-500W-LED-SS-480V","price":9536.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-500W-LED-SS-480V.jpg?v=1628906169"},{"product_id":"pl3-ledwl-zn-crn-4xr-4xb-5ft-480v-mod1","title":"LED Crane Zone Light System - 480V, 1PH - Pedestrian Safety - (4) Red, (4) Blue - Control Circuit - N4X","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-4XR.4XB-5FT-480V-MOD1 LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Crane Safety Light System\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Technology: Cree LED\u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Qty: (8) - (4) Red, (4) Blue\u003c\/td\u003e\n\u003ctd\u003eIP68 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  -\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X Control Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003e Control Circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 480V AC, 1PH\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 216W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Watts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 18,800 lms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Lumens: 2,350 lms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy:  -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color: Red and Blue\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Red and Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Beam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration: (1) Red and (1) Blue @ North, (1) Red and (1) Blue @ South, (1) Red and (1) Blue @ East, (1) Red and (1) Blue @ West\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCorresponding Movement: Vertical Up\/Down (Red), Horizontal (Blue)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 0.45A @ 480V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Polycarbonate \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 5' Cord from Each Light to N4X Control Box, Line-in and Control Circuit Cables, Cable Glands per Cable Connection\u003c\/td\u003e\n\u003c\/tr\u003e\n \n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"578\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 572px;\"\u003e\nThe Larson Electronics LEDWL-ZN-CRN-4XR.4XB-5FT-480V-MOD1 LED Crane Zone Light System is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This system contains four, red LED lamps and four, blue LED lamps. Equipped with a NEMA 4X control box, the unit operates on single-phase 480V AC. \nThe LEDWL-ZN-CRN-4XR.4XB-5FT-480V-MOD1 is a powerful LED zone lighting system for cranes and operational safety in industrial facilities. This 216-watt unit emits 18,800 total lumens of red and blue light during use. Four red and four blue LED lamps are provided in the following configuration: (1) Red and (1) Blue @ North, (1) Red and (1) Blue @ South, (1) Red and (1) Blue @ East, (1) Red and (1) Blue @ West. The LED fixtures provide a wide zone line for enhanced visibility and detection, when the crane is moving horizontally and vertically. At a height of 15 feet, each LED lamp provides a 30` x 1.5` beam spread on the ground. \nThis crane safety light is compatible with single-phase 480V AC. A control circuit is available for connections to customer-provided equipment, which allows the lights to operate only when in motion.\nDurability: Constructed of die-cast aluminum alloy, the LED pedestrian safety lights feature a polycarbonate lens. The LED lights also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nWiring: Operators may access five feet of cord from each light to a NEMA 4X control box. Line-in and control circuit cables are also provided from the control box. All cables from the control box are protected with cable glands.\nMounting: Each crane safety lamp on the system contains 304L stainless steel brackets for adjusting the position of the LED lights to match their preferences. \nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298271776949,"sku":"PL3-LEDWL-ZN-CRN-4XR.4XB-5FT-480V-MOD1","price":6180.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-4XR.4XB-5FT-480V-MOD1.jpg?v=1628906584"},{"product_id":"pl3-ledwl-zn-crn-blu-pa-wr-kt","title":"Crane Zone LED Light Package - Pedestrian Safety - Blue Light - Horn\/Wireless Remote","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-BLU-PA-WR-KT LED Crane Zone Light Kit\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Crane LED Safety Light Package\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology: CREE LED (Blue)\u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Dimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eWireless Remote\/Control Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-240V AC or 24V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Watts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Lumens: 2,350 lms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorn Volume: S7 SPL @ 10 feet = 112 dB\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Impedance: 8 Ohms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Audible Distance: 350 Feet\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorn Operating Modes: 8 User Selectable Field Tones\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls: Wireless Remote\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection: Short Circuit\/Overload\/ Over Voltage\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Housing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAC Input Connector: 1` Pigtail, Straight Blade Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Output Connector: 1` Pigtail, 2 Pin Deutsch Connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"644\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 638px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-BLU-PA-WR-KT LED Crane Zone Light Package is suitable for illuminative safety and audio-based alerts on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED lighting kit features a blue LED zone light for visual signaling, an audible horn for audio-based notifications, power converter, wireless remote and control box.\nThe LEDWL-ZN-CRN-BLU-PA-WR-KT is a powerful LED zone light kit for cranes and operational safety in industrial facilities. This system includes a blue LED zone light, audible horn, power converter, wireless remote and control box. Voltage options for this unit includes the following: 120-240V AC or 24V DC. The entire system can be controlled using the wireless remote.\nThe 27-watt LED crane safety lamp emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12V, 24V, 36V and 48V.\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a red version of this zone light (LEDWL-ZN-CRN-RED) for multi-colored safety lighting or as a standalone blue crane safety lamp.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. \nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.\nAudible Horn: The industrial horn provides operators with an effective and powerful alert\/signal system that can withstand demanding conditions and be heard over the operation of industrial machinery. Designed for notifications inside industrial buildings, warehouses, outdoor work sites and commercial facilities, the entire unit is finished in durable grey powder coat for resistance against corrosion and marine rated for wet environments. \nThis system component includes 8 different tones which can reach a peak output of 112dB @ 10 feet. This allows alarms originating from the horn to be heard as far as 350 feet away (maximum). Capable of remote operation for priority alerts, the housing on this unit is constructed of heavy-duty metal. This NEMA 4X-rated, work-area horn\/siren is weatherproof and resistant to corrosion, water, dust and external ice formation.\n \n\nHorn Tones: Selectable by switch-on sound module.\n\n1) Continuously running train of eight sounds in sequence.\n2) Wail - Conventional Siren\n3) Yelp - Rapid Siren\n4) Two-Tone\n5) Whoop - Ascending Low to High\n6) Yeow - Descending High to Low\n7) Horn - Steady\n8) Beep - Slow Intermittent Horn\n9) Stutter - Rapid Intermittent Horn\n10) Remote - Enables Remote Selection of:\n7 - Horn\n4 - Two-Tone - Alternating\n3 - Yelp - Rapid Siren\n1 - Wail - Manual Siren\n\n\nPower Converter: The power converter can be operated with input current ranging from 100 to 277V AC and will output 12 Volt DC current at 5 amps or 24 Volt DC at 2.5 amps. This power converter features an IP64 rated waterproof design, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage.\n\nThis converter comes with a straight blade plug on the input lead and a two pin Deutsch connector on the output lead, allowing users to simply plug the unit into a typical wall outlet, then connect any of our 12 volt lights equipped with Deutsch connectors.\n\n Mounting: The LED light can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. \nThe horn is mounted via an omni directional bracket, which allows mounting to flat surfaces and vertical adjustment of the horn for secure placement and optimum sound direction. The metal enclosure holding the electrical components of the horn\/strobe can be mounted to flat surfaces.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, industrial buildings and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298291830965,"sku":"PL3-LEDWL-ZN-CRN-BLU-PA-WR-KT","price":4516.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-BLU-PA-WR-KT.jpg?v=1628905900"},{"product_id":"pl3-ledwl-zn-crn-strb-blu","title":"27W Strobing LED Crane Zone Safety Light - Pedestrian Safety - Blue Light - 12-36V DC - Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-STRB-BLU Strobing LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Strobing LED (Blue)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eStrobing LED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12-36 V DC\u003c\/td\u003e\n\u003ctd\u003eStrobing Safety Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12 V @ 2.2 A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27 W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Strobing Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30' x 1.5' @ 15' (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-STRB-BLU Strobing LED Crane Zone Safety Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of blue light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-STRB-BLU is a powerful, strobing LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30' x 1.5' beam configuration. Operating on 12-36 V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12 V, 24 V, 36 V and 48 V. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nConstructed of die-cast aluminum alloy, the strobing LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a red version of this zone light (LEDWL-ZN-CRN-RED) for multi-colored safety lighting or as a standalone red crane safety lamp. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n \nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this strobing unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (12-36V AC and 12-36V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Wiring: The LEDWL-ZN-CRN-STRB-BLU can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. This unit comes with a power cord for completing electrical connections. \nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298362249397,"sku":"PL3-LEDWL-ZN-CRN-STRB-BLU","price":1124.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-STRB-BLU.jpg?v=1628916495"},{"product_id":"pl3-ledwl-zn-cn-90wre-red-50h","title":"90W High Intensity Pedestrian Warning LED Light - 12-32V DC - 6\" x 24\" Red Beam @ 50ft - Crane Operations","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CN-90WRE-RED-50H Pedestrian Warning Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Crane Safety Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Technology: Cree LED\u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8.7\"L x 7.93\"W x 10.57\"H\u003c\/td\u003e\n\u003ctd\u003eIP68 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12-32V DC\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 90W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 5,950 lms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy:  -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color: Red\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Red Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 6\"-W x 24\"-L @ 50` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 7.5 @ 12V DC, 3.75 @ 24V DC \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40° C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"605\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 599px;\"\u003e\nThe Larson Electronics LEDWL-ZN-CN-90WRE-RED-50H High Intensity Pedestrian Warning LED Light is ideal for illuminative safety during crane operations and in busy work sites, such as warehouses and delivery bays. This 90-watt ultra compact LED light produces 5,950 lumens of red light during operation. The low voltage safety light operates on 12-32V DC. \nThe LEDWL-ZN-CN-90WRE-RED-50H is a powerful LED zone light for cranes and operational safety in industrial facilities. This solid-state light produces 5,950 lumens of red light while drawing less than 8 amps from a 12 volt electrical system. At a height of 50 feet, the LED lamp provides a 6\" wide x 24\" long beam configuration. The red light is highly visible during the day and is recommended for supporting crane operations. This particular unit is ultra compact at 8.7\" OD (lamp head) and 10.57\" tall with the mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium.\nDurability: This LED light offers IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. The LED light can operate on current ranging from 12 to 32V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\nMounting:  This unit is suspended within a form-fitting trunnion (yolk-type) mount. The trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the crane safety light using a simple through-hole mount. This allows the unit to be installed anywhere a 1\/2\" hole can be drilled.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\nApplications: Pedestrian safety, forklift operations, zone lights, warehouses, compact vessels, carts, illuminative safety, industrial buildings and more.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298384433333,"sku":"PL3-LEDWL-ZN-CN-90WRE-RED-50H","price":2978.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CN-90WRE-RED-50H.jpg?v=1629001828"},{"product_id":"pl3-ledwl-zn-cn-90wre-blu-75h","title":"Larson 90W High Intensity Pedestrian Warning LED Light - 12-32V DC - 6\" x 24\" Blue Beam @ 75ft - Crane Operations","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eThis LED light offers IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eThese units are  able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. The LED light can operate on current ranging from 12 to 32V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThis unit is suspended within a form-fitting trunnion (yolk-type) mount. The trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the crane safety light using a simple through-hole mount. This allows the unit to be installed anywhere a 1\/2\" hole can be drilled.\r\u003cbr\u003eNote:\r\u003cbr\u003eMost Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003ePedestrian safety, forklift operations, zone lights, warehouses, compact vessels, carts, illuminative safety, industrial buildings and more.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eUnit  Type:  Crane Safety  Light\u003cbr\u003eLamp Technology: Cree LED\u003cbr\u003eDimensions:  8.7\"L x 7.93\"W x 10.57\"H\u003cbr\u003eWeight:  -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  12-32V DC\u003cbr\u003eTotal Watts:  90W\u003cbr\u003eTotal Lumens: 5,950 lms\u003cbr\u003eLuminous Efficacy:  -\u003cbr\u003eLamp Life: 50,000+ Hours\u003cbr\u003eLED Color:  Blue\u003cbr\u003eColor Rendering Index:  -\u003cbr\u003eLamp Type:  -\u003cbr\u003eLamp Base:  -\u003cbr\u003eReplacement Lamp:  -\u003cbr\u003eBeam Type:  Blue Zone Line\u003cbr\u003eBeam Profile:  6\"-W x 24\"-L @ 75` (Height)\u003cbr\u003eLED Drive:  90%\u003cbr\u003ePower Factor: \u003cbr\u003eAmps:  7.5 @ 12V DC, 3.75 @ 24V DC \u003cbr\u003eAmbient Operating Temp Range:  -40° C to +85°C\u003cbr\u003eHousing Material: \u003cbr\u003eHousing Finish:  -\u003cbr\u003eLens Material:  Polycarbonate Lens\u003cbr\u003eMounting:  Adjustable Bracket\u003cbr\u003eWiring:  Deutsch IPD \/ LADD DT04-2P connector\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38298385121461,"sku":"PL3-LEDWL-ZN-CN-90WRE-BLU-75H","price":3412.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_ce813999-3709-47e7-9ca0-a134c09e5b6f.png?v=1611106908"},{"product_id":"pl3-ledwl-zn-crn-red-1227","title":"27W LED Crane Zone Light - Pedestrian Safety - Red Light - 120\/277V AC 50\/60 Hz- Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-RED-1227 LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Red)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60 Hz and 127-431V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Red Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-RED-1227 LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of red light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-RED-1227 is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of red light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. This high voltage unit operates on universal voltage, allowing input power sources within a range of 90-305V AC @ 50\/60 Hz as well as 127-431V DC to operate this zone light without the need for changing taps or modifications to the power supply. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light for multi-colored safety lighting or as a standalone blue crane safety lamp. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nMounting: The LEDWL-ZN-CRN-RED-1227 can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences.\nWiring\/Power: The LEDWL-ZN-CRN-RED-1227 LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on voltages ranging from 120-240V AC.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391281845,"sku":"PL3-LEDWL-ZN-CRN-RED-1227","price":1122.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-RED-1227.jpg?v=1628916456"},{"product_id":"pl3-ledwl-zn-crn-blu-1227","title":"27W LED Crane Zone Light - Pedestrian Safety - Blue Light - 120\/277V AC 50\/60 Hz- Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-BLU-1227 LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Blue)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60 Hz and 127-431V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type:Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-BLU-1227 LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of blue light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-BLU-1227 is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. This high voltage unit operates on universal voltage, allowing input power sources within a range of 90-305V AC @ 50\/60 Hz as well as 127-431V DC to operate this zone light without the need for changing taps or modifications to the power supply. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light for multi-colored safety lighting or as a standalone blue crane safety lamp. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nMounting: The LEDWL-ZN-CRN-BLU-1227 can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences.\nWiring\/Power: The LEDWL-ZN-CRN-BLU-1227 LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on voltages ranging from 120-240V AC.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391314613,"sku":"PL3-LEDWL-ZN-CRN-BLU-1227","price":1122.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-BLU-1227.jpg?v=1628916432"},{"product_id":"pl3-ledwl-zn-crn-blu","title":"27W LED Crane Zone Light - Pedestrian Safety - Blue Light - 10-100V DC - Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-BLU LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Blue)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 10-100V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-BLU LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of blue light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-BLU is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12V, 24V, 36V and 48V. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a red version of this zone light (LEDWL-ZN-CRN-RED) for multi-colored safety lighting or as a standalone red crane safety lamp. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n \nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (10-100V AC and 10-100V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Wiring: The LEDWL-ZN-CRN-BLU can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. This unit comes with a power cord for completing electrical connections. \nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391380149,"sku":"PL3-LEDWL-ZN-CRN-BLU","price":560.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-BLU.jpg?v=1628916444"},{"product_id":"pl3-ledwl-zn-crn-blu-dt","title":"27W LED Crane Zone Light - Pedestrian Safety - Blue Light - 10-100V DC - Aluminum Alloy - Ladd \/ Deutsch DT04-2P Receptacle","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-BLU-DT LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Blue)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 10-100V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 6\" Cord Terminated in Ladd \/ Deutsch DT04-2P Receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-BLU-DT LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of blue light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets.\nThe LEDWL-ZN-CRN-BLU-DT is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12V, 24V, 36V and 48V.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 544.444px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light (LEDWL-ZN-CRN-BLU) for multi-colored safety lighting or as a standalone blue crane safety lamp.\n LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (10-100V AC and 10-100V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Wiring: The LEDWL-ZN-CRN-BLU-DT can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. This unit comes with a power cord for completing electrical connections.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n\u003cdiv\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391412917,"sku":"PL3-LEDWL-ZN-CRN-BLU-DT","price":586.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-BLU-DT.jpg?v=1628916428"},{"product_id":"pl3-ledwl-zn-crn-blu-250vdc","title":"27W LED Crane Zone Light - Pedestrian Safety - Blue Light - 250V DC - Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-BLU-250VDC LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Blue)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 250V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type:Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-BLU-250VDC LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of blue light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets.\nThe LEDWL-ZN-CRN-BLU-250VDC is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of blue light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. This high voltage unit operates on 250V DC to operate this zone light without the need for changing taps or modifications to the power supply.\n\u003ctable width=\"100%\" style=\"background-color: #ffffff;\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 544.444px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light for multi-colored safety lighting or as a standalone blue crane safety lamp.\n\u003ctable width=\"100%\" style=\"background-color: #ffffff;\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 544.444px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nMounting: The LEDWL-ZN-CRN-BLU-250VDC can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences.\nWiring\/Power: The LEDWL-ZN-CRN-BLU-250VDC LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on 250V DC.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391511221,"sku":"PL3-LEDWL-ZN-CRN-BLU-250VDC","price":1122.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-BLU-250VDC.jpg?v=1628916465"},{"product_id":"pl3-ledwl-zn-crn-org-1227","title":"27W LED Crane Zone Light - Pedestrian Safety - Orange Light - 120\/277V AC 50\/60 Hz- Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-ORG-1227 LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Orange)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60 Hz and 127-431V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Orange Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-ORG-1227 LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of orange light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-ORG-1227 is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of orange light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. This high voltage unit operates on universal voltage, allowing input power sources within a range of 90-305V AC @ 50\/60 Hz as well as 127-431V DC to operate this zone light without the need for changing taps or modifications to the power supply. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light for multi-colored safety lighting or as a standalone blue crane safety lamp. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n \u003c\/table\u003e\nMounting: The LEDWL-ZN-CRN-ORG-1227 can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences.\nWiring\/Power: The LEDWL-ZN-CRN-ORG-1227 LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on voltages ranging from 120-240V AC.\nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298391871669,"sku":"PL3-LEDWL-ZN-CRN-ORG-1227","price":1198.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-ORG-1227.jpg?v=1628916459"},{"product_id":"pl3-ledwl-zn-crn-red-dt","title":"27W LED Crane Zone Light - Pedestrian Safety - Red Light - 10-100V DC - Aluminum Alloy - Ladd \/ Deutsch DT04-2P Receptacle","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-RED LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Red)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 10-100V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Red Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 6\" Cord Terminated in Ladd \/ Deutsch DT04-2P Receptacle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-RED-DT LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of red light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-RED-DT is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of red light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12V, 24V, 36V and 48V. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light (LEDWL-ZN-CRN-BLU) for multi-colored safety lighting or as a standalone blue crane safety lamp. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n \nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (10-100V AC and 10-100V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Wiring: The LEDWL-ZN-CRN-RED-DT can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. This unit comes with a power cord for completing electrical connections. \nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298392363189,"sku":"PL3-LEDWL-ZN-CRN-RED-DT","price":586.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-RED-DT.jpg?v=1628916462"},{"product_id":"pl3-ledwl-zn-crn-red","title":"27W LED Crane Zone Light - Pedestrian Safety - Red Light - 10-100V DC - Aluminum Alloy","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CRN-RED LED Crane Zone Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: CREE LED (Red)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 5.77\" x 2.39\" x 21.2\" \u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eLow Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 10-100V DC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent: 12V @ 2.2A\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 27W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,350 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Red Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 30` x 1.5` @ 15` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: Die-cast Aluminum Alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 304L SS Brackets \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Power Cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics LEDWL-ZN-CRN-RED LED Crane Zone Light is suitable for illuminative safety on cranes in busy work sites, such as construction, large-scale shipping operations and manufacturing plants (overhead cranes). This LED fixture consumes 27 watts and emits 2,350 lumens of red light during operation. The low profile LED mounts on cranes and surfaces via two 304L stainless steel brackets. \nThe LEDWL-ZN-CRN-RED is a powerful LED zone light for cranes and operational safety in industrial facilities. This 27-watt unit emits 2,350 lumens of red light during use. Compared to a laser safety light, the LED fixture provides a wider zone line for enhanced visibility and detection. At a height of 15 feet, the LED lamp provides a 30` x 1.5` beam configuration. Operating on 10-100V DC, the LED pedestrian safety light is compatible with a range of standard low voltages, including 12V, 24V, 36V and 48V. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nConstructed of die-cast aluminum alloy, the LED pedestrian safety light features a polycarbonate lens. A heavy-duty crane may incorporate this LED light at the front, back or both ends of the structure. Alternatively, operators may also install a blue version of this zone light (LEDWL-ZN-CRN-BLU) for multi-colored safety lighting or as a standalone blue crane safety lamp. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n \nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (10-100V AC and 10-100V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Wiring: The LEDWL-ZN-CRN-RED can be mounted on cranes and surfaces using two included 304L stainless steel brackets located at the bottom of the LED lamp, which can be secured using two screws (holes provided). Once mounted, operators can adjust the position of the LED zone light accordingly to match their preferences. This unit comes with a power cord for completing electrical connections. \nApplications: Pedestrian safety, crane operations, zone lights, overhead cranes, shipping, construction sites, manufacturing plants, large-scale installations, illuminative safety, industrial buildings and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298392461493,"sku":"PL3-LEDWL-ZN-CRN-RED","price":560.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CRN-RED.jpg?v=1628916483"},{"product_id":"pl3-ledwl-crn-red","title":"25W Red Crane LED Warning Light - 2250 Lumens - 9-60V DC - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-RED LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Red LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 6\"-H x 3.91\"-W x 3.59\"-D\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 9-60V DC\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: U-bracket style trunnion with tension bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-RED Round Red LED Light Fixture is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw, 50,000 hour service life, and 9 to 60 volt compatibility providing operators with a versatile and powerful warning safety light.\nThe LEDWL-CRN-RED Round Red LED light from Larson Electronics produces 2250 lumen of sharp red light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. This particular unit is ultra compact at only 6\" tall by 3.91\" wide by 3.36\" deep, which makes it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-RED addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-RED to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (347-480V AC and 120-277V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting: The LEDWL-FKLT-RED is suspended within a form fitting trunnion (yolk-type) mount. This trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1\/2-inch hole can be drilled.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298437976245,"sku":"PL3-LEDWL-CRN-RED","price":380.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-RED.jpg?v=1629001441"},{"product_id":"pl3-ledwl-crn-red-1227","title":"25W Red Crane LED Warning Light - 2250 Lumens - 120-277V AC - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-RED-1227 LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Red LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 6\"-H x 3.91\"-W x 3.59\"-D\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 120-277V AC\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: U-bracket style trunnion with tension bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring:10` 16\/3 SOOW Input with 20` 16\/3 from Poly Box to Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-RED-1227 Round Red LED Light Fixture is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw, 50,000 hour service life, and 120-277 volt compatibility providing operators with a versatile and powerful warning safety light.\nThe LEDWL-CRN-RED-1227 Round Red LED light from Larson Electronics produces 2250 lumen of sharp red light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. This particular unit is ultra compact at only 6\" tall by 3.91\" wide by 3.36\" deep, which makes it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-RED-1227 addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-RED-1227 to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 120-277V AC without any modifications necessary as a result. (347-480V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\n Durability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting: The LEDWL-FKLT-RED is suspended within a form fitting trunnion (yolk-type) mount. This trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the light using a simple through-hole mount, allowing the unit to be installed anywhere a 1\/2-inch hole can be drilled.\nWiring\/Power: The LEDWL-CRN-RED-1227 LED spotlight is equipped with Deustch connector and a 20` wiring harness. The external power supply is remote mountable. Operators can install the power supply between the light and the control station. The external power supply is designed to be hardwired and operates on voltages ranging from 120-277V AC.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298438107317,"sku":"PL3-LEDWL-CRN-RED-1227","price":942.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-RED-1227.jpg?v=1629001449"},{"product_id":"pl3-ledwl-crn-red-rps-16ah-wr-m","title":"25W Rechargeable Red Crane LED Warning Light - 2250 Lumens - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-RED-RPS.16AH-WR-M LED Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Red LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  6\"L x 4.5\"W x 9.5\"H\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:-\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Magnetic Mount via (2) 200 lbs Grip Magnets\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 16aH, Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Run Time: 12 hrs \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Charge Time: 2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Frequency: 433 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Distance: 75`\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Type: Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Voltage: 120V or 240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n \u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-RED-RPS.16AH-WR-M Rechargeable Red LED Crane Light is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw and 50,000 hour service life. The magnetic-mount unit is powered by a rechargeable 16aH lithium-ion battery for up to 12 hours and features wireless remote functionality.\nThe LEDWL-CRN-RED-RPS.16AH-WR-M Rechargeable Red LED Crane light from Larson Electronics produces 2250 lumen of sharp red light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp is ultra compact with 4.5\" OD lamp head, making it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-RED-RPS.16AH-WR-M addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-RED-RPS.16AH-WR-M to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nThe portable LED crane light is powered by a rechargeable 16aH lithium-ion battery. The battery has a 12 hour runtime and requires 2 hours to fully charge. A wireless control board can be found inside the unit for wireless remote functions. Remote operation is provided by one wireless handheld remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 75 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3\/8 inch thick.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Charging: The LEDWL-CRN-RED-RPS.16AH-WR-M is equipped with two, 200 lbs grip magnets, which are located at the bottom of the aluminum box, for versatile magnetic mounting applications. Operators can mount the rechargeable LED spotlight without tools and\/or with gloved hands. Each unit comes with a charger for recharging via mainstream wall outlets. Voltage options for the charger includes 120V or 240V.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298438140085,"sku":"PL3-LEDWL-CRN-RED-RPS.16AH-WR-M","price":2826.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-RED-RPS.16AH-WR-M.jpg?v=1629001453"},{"product_id":"pl3-ledwl-crn-blu-rps-16ah-wr-m","title":"25W Rechargeable Blue Crane LED Warning Light - 2250 Lumens - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-BLU-RPS.16AH-WR-M LED Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Blue LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  6\"L x 4.5\"W x 9.5\"H\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:-\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Blue\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Magnetic Mount via (2) 200 lbs Grip Magnets\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 16aH, Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Run Time: 12 hrs \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Charge Time: 2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Frequency: 433 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Distance: 75`\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Type: Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Voltage: 120V or 240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-BLU-RPS.16AH-WR-M Rechargeable Blue LED Crane Light is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw and 50,000 hour service life. The magnetic-mount unit is powered by a rechargeable 16aH lithium-ion battery for up to 12 hours and features wireless remote functionality.\nThe LEDWL-CRN-BLU-RPS.16AH-WR-M Rechargeable Blue LED Crane light from Larson Electronics produces 2250 lumen of sharp blue light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt blue LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp is ultra compact with 4.5\" OD lamp head, making it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-BLU-RPS.16AH-WR-M addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-BLU-RPS.16AH-WR-M to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nThe portable LED crane light is powered by a rechargeable 16aH lithium-ion battery. The battery has a 12 hour runtime and requires 2 hours to fully charge. A wireless control board can be found inside the unit for wireless remote functions. Remote operation is provided by one wireless handheld remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 75 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3\/8 inch thick.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Charging: The LEDWL-CRN-BLU-RPS.16AH-WR-M is equipped with two, 200 lbs grip magnets, which are located at the bottom of the aluminum box, for versatile magnetic mounting applications. Operators can mount the rechargeable LED spotlight without tools and\/or with gloved hands. Each unit comes with a charger for recharging via mainstream wall outlets. Voltage options for the charger includes 120V or 240V.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298438336693,"sku":"PL3-LEDWL-CRN-BLU-RPS.16AH-WR-M","price":2826.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-BLU-RPS.16AH-WR-M.jpg?v=1629001451"},{"product_id":"pl3-ledwl-crn-blu-rps-8ah-wr-m","title":"25W Rechargeable Blue Crane LED Warning Light - 2250 Lumens - Pedestrian Warning Safety Light - IP67","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-BLU-RPS.8AH-WR-M LED Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Blue LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  6\"L x 4.5\"W x 9.5\"H\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:-\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Blue\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Magnetic Mount via (2) 200 lbs Grip Magnets\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 8aH, Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Run Time: 6 hrs \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Charge Time: 2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Frequency: 433 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Distance: 75`\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Type: Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Voltage: 120V or 240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-BLU-RPS.8AH-WR-M Rechargeable Blue LED Crane Light is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw and 50,000 hour service life. The magnetic-mount unit is powered by a rechargeable 8aH lithium-ion battery for up to 6 hours and features wireless remote functionality.\nThe LEDWL-CRN-BLU-RPS.8AH-WR-M Rechargeable Blue LED Crane light from Larson Electronics produces 2250 lumen of sharp blue light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt blue LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp is ultra compact with 4.5\" OD lamp head, making it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-BLU-RPS.8AH-WR-M addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-BLU-RPS.8AH-WR-M to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nThe portable LED crane light is powered by a rechargeable 8aH lithium-ion battery. The battery has a 6 hour runtime and requires 2 hours to fully charge. A wireless control board can be found inside the unit for wireless remote functions. Remote operation is provided by one wireless handheld remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 75 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3\/8 inch thick.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Charging: The LEDWL-CRN-BLU-RPS.8AH-WR-M is equipped with two, 200 lbs grip magnets, which are located at the bottom of the aluminum box, for versatile magnetic mounting applications. Operators can mount the rechargeable LED spotlight without tools and\/or with gloved hands. Each unit comes with a charger for recharging via mainstream wall outlets. Voltage options for the charger includes 120V or 240V.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298438369461,"sku":"PL3-LEDWL-CRN-BLU-RPS.8AH-WR-M","price":2186.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-BLU-RPS.8AH-WR-M.jpg?v=1629001448"},{"product_id":"pl3-ledwl-crn-red-rps-8ah-wr-m","title":"25W Rechargeable Blue Crane LED Warning Light - 2250 Lumens - 8aH Battery - Wireless Remote - Magnetic Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWL-CRN-RED-RPS.8AH-WR-M LED Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: Red LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eIP67 Waterproof to 1 Meter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  6\"L x 4.5\"W x 9.5\"H\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2 lbs\u003c\/td\u003e\n\u003ctd\u003eShatterproof Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:-\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Oncoming Vehicles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eVisible With High Illuminate Warehouse Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot Beam \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptic: PMMA\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material:Aluminum\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Magnetic Mount via (2) 200 lbs Grip Magnets\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring Hub: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 8aH, Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Run Time: 6 hrs \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Charge Time: 2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Frequency: 433 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Remote Distance: 75`\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Type: Wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger Voltage: 120V or 240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe LEDWL-CRN-RED-RPS.8AH-WR-M Rechargeable RED LED Crane Light is ideal for several uses including industrial manufacturing applications and overhead crane safety. This ultra compact LED light produces a 2,250 lumen output with low amp draw and 50,000 hour service life. The magnetic-mount unit is powered by a rechargeable 8aH lithium-ion battery for up to 6 hours and features wireless remote functionality.\nThe LEDWL-CRN-RED-RPS.8AH-WR-M Rechargeable RED LED Crane light from Larson Electronics produces 2250 lumen of sharp RED light while drawing 2.09 amps from a 12 volt electrical system. Five 5-watt RED LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp is ultra compact with 4.5\" OD lamp head, making it ideal for applications where electrical power and mounting space is at a premium.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nStandard warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes and vehicles, depending on the position of the light, can be a hindrance to the operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system systems, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The LEDWL-CRN-RED-RPS.8AH-WR-M addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\n LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nLED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the LEDWL-CRN-RED-RPS.8AH-WR-M to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nThe portable LED crane light is powered by a rechargeable 8aH lithium-ion battery. The battery has a 6 hour runtime and requires 2 hours to fully charge. A wireless control board can be found inside the unit for wireless remote functions. Remote operation is provided by one wireless handheld remote controller that operates over a radio frequency of 433 MHz. This remote includes an internal 12 volt battery rated at 1 year of operation and a single red LED to indicate remote control activity. The remote controller has a range of up to 75 feet and will operate through walls, within structures, and in vehicles. The remote is constructed of polycarbonate with rubber push pad buttons for weatherproof durability and can be user programmed to operate one or several lights simultaneously. Remotes are 3 inches long by 2 inches wide by 3\/8 inch thick.\nDurability: As well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\nMounting\/Charging: The LEDWL-CRN-RED-RPS.8AH-WR-M is equipped with two, 200 lbs grip magnets, which are located at the bottom of the aluminum box, for versatile magnetic mounting applications. Operators can mount the rechargeable LED spotlight without tools and\/or with gloved hands. Each unit comes with a charger for recharging via mainstream wall outlets. Voltage options for the charger includes 120V or 240V.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38298438467765,"sku":"PL3-LEDWL-CRN-RED-RPS.8AH-WR-M","price":2186.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-CRN-RED-RPS.8AH-WR-M.jpg?v=1629001465"},{"product_id":"pl3-ledwl-zn-cn-90wre-blu-50h","title":"90W High Intensity Pedestrian Warning LED Light - 12-32V DC - 6\" x 24\" Blue Beam @ 50ft - Crane Operations","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLEDWL-ZN-CN-90WRE-BLU-50H Pedestrian Warning Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Crane Safety Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003ePedestrian Safety\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Technology: Cree LED\u003c\/td\u003e\n\u003ctd\u003eLED Zone Lights \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8.7\"L x 7.93\"W x 10.57\"H\u003c\/td\u003e\n\u003ctd\u003eIP68 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12-32V DC\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 90W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 5,950 lms\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy:  -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color: Blue\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Blue Zone Line\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Profile: 6\"-W x 24\"-L @ 50` (Height)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 7.5 @ 12V DC, 3.75 @ 24V DC \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40° C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Finish: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"605\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 599px;\"\u003e\nThe Larson Electronics LEDWL-ZN-CN-90WRE-BLU-50H High Intensity Pedestrian Warning LED Light is ideal for illuminative safety during crane operations and in busy work sites, such as warehouses and delivery bays. This 90-watt ultra compact LED light produces 5,950 lumens of blue light during operation. The low voltage safety light operates on 12-32V DC. \nThe LEDWL-ZN-CN-90WRE-BLU-50H is a powerful LED zone light for cranes and operational safety in industrial facilities. This solid-state light produces 5,950 lumens of blue light while drawing less than 8 amps from a 12 volt electrical system. At a height of 50 feet, the LED lamp provides a 6\" wide x 24\" long beam configuration. The blue light is highly visible during the day and is recommended for supporting crane operations. This particular unit is ultra compact at 8.7\" OD (lamp head) and 10.57\" tall with the mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium.\nDurability: This LED light offers IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. The LED light can operate on current ranging from 12 to 32V DC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\nMounting:  This unit is suspended within a form-fitting trunnion (yolk-type) mount. The trunnion mount has two knurled knobs that can be loosened, allowing the LED light to be adjusted and then re-tightened to lock the light into any desired position once mounted. A single stainless steel stud protrudes from the bottom of the mount, enabling the operator to install the crane safety light using a simple through-hole mount. This allows the unit to be installed anywhere a 1\/2\" hole can be drilled.\nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, LED10W, and LEDP WRE series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB, LEDP10W and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\nApplications: Pedestrian safety, forklift operations, zone lights, warehouses, compact vessels, carts, illuminative safety, industrial buildings and more.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38308226072757,"sku":"PL3-LEDWL-ZN-CN-90WRE-BLU-50H","price":2978.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-ZN-CN-90WRE-BLU-50H.jpg?v=1629001830"},{"product_id":"pl3-smlp-16x500ltl-led-1227","title":"Larson 7680W Skid Mount LED Light Plant - (16) 480W LED Fixtures - 120-277V AC 1-Phase - Crane Light","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in Texas\r\u003cbr\u003eThe SMLP-16X500LTL-LED-1227 Cube Mount LED Light Plant by Larson Electronics is a massive 7,680-watt lighting system that is suitable for stadium lighting, crane rig lighting, outdoor events and more. This unit contains 16, 480-watt LED fixtures and operates on 120-277V AC single-phase. Capable of emitting 1,039,800 lumens, the light head assembly is mounted on a carbon steel, cube-style platform with picking eyes for seamless hoisting and transportation.\r\u003cbr\u003eThe SMLP-16X500LTL-LED-1227 skid mounted light plant is equipped with 16, 480-watt LED lamps (total of 7,680 watts) for superior lighting in industrial environments. During operation, this unit emits a cool white light at 1,039,800 lumens in a flood beam configuration for wide area lighting. The light plant runs on 120-277V AC single-phase via customer provided line-in cord. When in use, the LED light plant can light up between 7-70 acres and reach targets from distances up to 1,000 feet. This caged lighting system is designed to illuminate targets from an elevated position. Reflectors around each lamp help focus and amplify illumination during operation. Hooking and securing components around the mount allow operators to raise the unit safely.\r\u003cbr\u003eMounted to Crane\r\u003cbr\u003eForklift Skid Pockets\r\u003cbr\u003eFour Corner Eyelets\r\u003cbr\u003eFused Disconnect\r\u003cbr\u003eBack of Unit\r\u003cbr\u003eThis unit uses 16 GAU-LTL-500W-LED LED light from Larson Electronics, which individually produces 64,800 lumens of high intensity light while drawing only 480 watts. Fourty-Eight CREE high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a flood-configured beam. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the LED lights on this unit also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eMounting:\r\u003cbr\u003eUnlike many caged lighting boxes made of plastic and utilizing thin gauge, low grade metals in their construction, the SMLP-16X500LTL-LED-1227 is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The LED lighting system is mounted on a cube-style thick carbon steel mounting platform, resulting in an extremely stable, durable and well protected unit. This model is equipped with picking eyes, which can be used for crane hoisting. Forklift skid pockets, locking casters and a top located lifting eyelet are also available, allowing easy lifting with forklifts, cable or chain hooks.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eStadium lighting, offshore lighting, crane lighting, cage mounted lighting, outdoor events, construction site lighting, emergency camps and large-scale industrial sites.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: LED\u003cbr\u003eDimensions:  122\"L x 90\"H x 40\"D\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120-277V AC Single-Phase\u003cbr\u003eTotal Watts: 7,680\u003cbr\u003eWatts Per Lamp:  480W \u003cbr\u003eTotal Lumens:  1,036,800 (64,800 Per Lamp)\u003cbr\u003eLife Expectancy: 80,000+ hours\u003cbr\u003eBeam Configurations: Flood Beam\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLED Drive:  90%\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eHousing Material:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eMounting:  Cube Mount w\/ Skid Pockets and Picking Eyes \u003cbr\u003eMounting Material:  Carbon Steel \u003cbr\u003eWiring:  Customer provided\u003cbr\u003eWeight:  1200 Lbs\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38363839365301,"sku":"PL3-SMLP-16X500LTL-LED-1227","price":91234.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_b0508249-7ea2-4636-ae04-cf0a907a7a20.png?v=1611764658"},{"product_id":"pl3-gau-hb-2x160led-480v","title":"High Output 300 Watt Crane and Rough Service LED Light Fixture - 35,000 Lumens - 480V AC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-HB-2X160LED-480V High Bay LED Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eLow amp draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 28\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eLong lamp life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 64 lbs\u003c\/td\u003e\n\u003ctd\u003eUL 595 Rated for Marine Use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 480V 3P\u003c\/td\u003e\n\u003ctd\u003eMultiple LED Banks Reduce Failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 300W\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 35,000 \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp Rating: T5 -40°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Pendant, Ceiling, Wall\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 0.7 @ 480V AC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 3.6A Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: \u0026gt;98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eEfficiency: \u0026gt;88%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOutput Current: 4.2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics GAU-HB-2X160LED-480V Crane and Rough Service 480V LED light fixture provides operators with a powerful and energy efficient alternative to traditional gas burning luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** \nThis 480 volt crane and rough service LED light fixture provides 35,000 lumens of high quality light while drawing only 300 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. This low profile LED fixture is an ideal replacement for metal halide and high pressure sodium fixtures.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThe LED light head in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminate. The GAU-HB-160LED series contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. \nThis light operates on 480V AC three phase stepped down to 277V AC. The aluminum body, hardened glass lens, and solid state LEDs give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 35,000 lumens with a color temperature of 5000K, 4000K, 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. \nMounting Option Notes:\n1. Pendant mounting option requires conduit be supplied by the installer.\n2. Wall mounting option comes with Junction Box, Fixture Hanger Cover and Rigid Pipe Sweep.\n3. Swivel bracket mounting option comes with Swivel Bracket, Bracket to fixture hardware.\n\n\u003ctable cellpadding=\"2\" width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Multiple Mounting Options Including Pendant, Wall, Ceiling, Cable Mounting and Swivel Bracket.\n8. Low profile - Light weight\n9. 35,000 Lumen output from only 300 watts\n\n\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38363879506101,"sku":"PL3-GAU-HB-2X160LED-480V","price":6852.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-2X160LED-480V.jpg?v=1628906287"},{"product_id":"pl3-cm-4x400ltl-25","title":"1920 Watt Portable LED Floodlight System- 4 X 480 Watt LED Lights - Crane Lighting - 240,000 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eCM-4X400LTL-25 Cage Mount Light System\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eQuick Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eETL Listed US \u0026amp; Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: \u003c\/td\u003e\n\u003ctd\u003eDial-in Adjustability per light head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 100-277 VAC, 50\/60Hz\u003c\/td\u003e\n\u003ctd\u003e80,000+ Lamp Life - 98% Transmission Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 1,600 watts \u003c\/td\u003e\n\u003ctd\u003eCorrosion Resistant Aluminum Housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 216,000\u003c\/td\u003e\n\u003ctd\u003eCenter Located Pickeye \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60 ° Flood, 90° Wide Flood\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemp Rating: T5 -40°C to +65°C\u003c\/td\u003e\n\u003ctd\u003e4 Corner Mounted LED Lights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: Cool White 5500-5600K, 70-CRI\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 80,000+ Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 13.34 @ 120V - 7.7 @ 208V - 6.67 @ 240V - 5.78 @ 277V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Aluminum Square Tube w\/ Center Pick Eye\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 25` 12\/3 SOOW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptions: Length- Mounting-Fixtures\/ Call Us for Special Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\n  \n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe CM-4X400LTL-25 portable LED flood lighting system from Larson Electronics produces 216,000 lumens of light. This portable lighting system is designed for rugged yet portable use and is ideal for use in demanding industrial and outdoor construction conditions. This LED flood light system is designed for hanging from cranes to illuminate large work areas from overhead.\n***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** \nThe CM-4X400LTL-25 is a portable lighting system that provides 216,000 lumens of light output. This portable lighting system has a pick eye for easy positioning of the unit from one area of the workspace to another to illuminate a large area without the need of a light tower. The light assembly on this unit produces a wide flood pattern of light that is ideal for illuminating large workspaces and job sites. This light is designed for heavy duty use in demanding conditions including emergency services, mining, construction, marine, and industrial operations where durability and portability is important.\nThis portable lighting system is comprised of a light weight aluminum assembly fitted with four high output LED lamps mounted to a portable aluminum frame with a top mounted pick eye. The LED lamps can be easily adjusted up, down or from side to side independently of each other and locked into position for maximum coverage of the work area. \nIncluded with this portable lighting system is 25 feet of SOOW cord with a twist lock plug which combined with the full adjustability of the light heads helps provide optimal coverage of the workspace. \n\nIncluded with this lighting system is four of our wet area suitable high output LED fixtures producing a combined total of approximately 216,000 lumens at 1,600 watts. The light head contains forty-eight Cree® high output LEDs producing 1125 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spot lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. Each floodlight is securely fastened to the light boom and each lamp includes a stainless steel support bracket to help maintain lamp stability within its housing.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours. In addition, should an LED failure occur, these LED flood lights are field serviceable. Each bank of six LEDs can be replaced with the fixture installed. This allows for the tower to stay in operation until repairs can take place, and eliminates the need to remove and disassemble the entire fixture for repairs.\nDurability: As well as unparalleled heat control, the GAU-HB-400W-LED-SS series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We use these LED lights for applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 44px;\"\u003e\n\u003ctable height=\"306\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%; height: 131px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\nClick Photo To Enlarge\n\u003c\/td\u003e\n\u003ctd\u003e\nClick Photo To Enlarge\n\u003c\/td\u003e\n \u003ctd\u003e\nClick Photo To Enlarge\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nThis portable crane mounted LED flood lighting system is operated via centrally located control box with power switches within the cube frame, allowing operators to power the LED light fixtures on or off. Wiring is provided via 25` 12\/3 SOOW cable terminated in a twist lock plug. A waterproof twist lock connector allows for secure connection during deployment and ensures the flood lighting system will not come unplugged during operation.\nThis is a heavy duty unit designed for use in demanding conditions and for overall longevity in difficult construction environments with heavy duty aluminum construction for maximum durability. We make this lighting solution in the United States. Larson Electronics light towers and lighting systems are designed for industrial, commercial, emergency response, and military applications where the operators are working in harsh, destructive environments and the operators income or mission success are dependent on dependable, durable lighting. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38363916271797,"sku":"PL3-CM-4X400LTL-25","price":35004.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-CM-4X400LTL-25.jpg?v=1628905648"},{"product_id":"pl3-gau-hb-1000w-led-ss-480v","title":"1000W High Intensity LED Crane Light - 110,000 Lumens - 347-480V AC - Stainless Steel Bracket","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eGAU-HB-1000W-LED-SS-480V LED Crane Light\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eQuick Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLamp Type: Cree® XTE LEDs\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003e2500 Watt Metal Halide Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 17.17\" H x 21.02\"W x 19.57\"D (23.68\"D w\/ Mounting Bracket)\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 66.25 Lbs\u003c\/td\u003e\n\u003ctd\u003eIdeal for Crane Lighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 1000 Watts\u003c\/td\u003e\n\u003ctd\u003eHigh Specular Reflectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 110,000\u003c\/td\u003e\n\u003ctd\u003e110 Lumens Per Watt Efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Chip: CREE XPE\u003c\/td\u003e\n\u003ctd\u003eIP65 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Qty: 440\u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 110 Lm\/W\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 50,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configurations: 10° Spot or 60° Flood\u003c\/td\u003e\n\u003ctd\u003eUL1012 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: Cool White - 5500K\u003c\/td\u003e\n\u003ctd\u003eUL60950-1 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eCE Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLed Drive %: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 3.00A @ 347V, 2.17A @ 480V\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` Pigtail w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Stainless Steel Flat Surface Trunnion Mount U-Bracket w\/ 240° Adjustability\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Die Cast Aluminum Housing, High Specular Reflector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Powder Coated Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Range: -40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWaterproof Rating: IP65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eApplication: Crane Lighting - Ideal for Mounting at 50+ Foot Heights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe GAU-HB-1000W-LED-SS-480V from Larson Electronics is an LED Crane Light that offers intense light output and is ideal for mounting to indoor or outdoor cranes at mounting heights of 50 feet and higher. Producing 110,000 lumens, a 3.00 amp draw at 347V, 50,000 hour service life, 347-480V volt compatibility, and IP65 waterproof rating, this LED crane light provides operators with a rugged and powerful LED alternative to 2500 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. The GAU-HB-1000W-LED-SS-480V features a stainless steel bracket for secure crane mounting with high corrosion resistance.\nThe GAU-HB-1000W-LED-SS-480V LED light from Larson Electronics produces 110,000 lumens of high intensity light while drawing only 1,000 watts at 3.00 amps from a 347 volt electrical system. High output Cree® XTE LEDs are paired with a high purity polished aluminum reflector to produce a well focused 10° spot beam that is ideal for providing far reaching concentrated illumination. We also offer optional reflector a 60° flood beam spreads for covering wide areas. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \nGAU-HB-1000W-LED-SS-480V lights are ideal replacements for fragile and hot running 2500 watt metal halide lamps. They offer low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: crane lighting at 50+ foot heights. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units features a cast aluminum heat sink with copper heatpipes behind the reflector assembly to control heat buildup along with gear-slotting fin technology to dissipate heat. This heat sink is designed to allow ample air flow through the fixture, cooling the unit during operation. This allows for more thorough cooling of the LEDs for extended operating periods and allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nDurability: As well as unparalleled heat control, the GAU-HB-1000W-LED-SS-480V series of LED lights from Larson Electronics also offer IP65 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +50° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum lens is constructed of impact and shatter resistant polycarbonate. The Cree® XTE LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 50,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\nVoltage: This light is universal voltage capable and can be operated with 347-480V AC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These lights can operate on current ranging from 347V to 480V 50\/60Hz without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\nMounting: Each unit is equipped with a stainless steel back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 240° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376278786229,"sku":"PL3-GAU-HB-1000W-LED-SS-480V","price":11938.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-1000W-LED-SS-480V.jpg?v=1629079255"},{"product_id":"pl3-gau-hb-400w-led-ss","title":"Larson 480 Watt High Bay LED Light - 60,000 Lumens 120-277V AC\/DC - Stainless Steel Brackets - Crane Light","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-HB-400W-LED-SS High Bay LED Flood Light offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 3.34 amp draw at 120V, 80,000 hour service life, 120-277 volt AC and 130-430 volt DC compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-HB-400W-LED-SS LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 3.34 amps from a 120 volt electrical system. Forty-eight Cree high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-HB-400W-LED-SS lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003eThe above image shows the comparison of the traditional (16) 1000 watt metal halides light fixtures mounted to a 50` light tower (left) to (16) GAU-HB-400W-LED-SS-480V 480 watt LED light fixtures mounted to a 50` light tower. The area being illuminated by each tower is 500` in length and 300` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-HB-400W-LED-SS series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eThese lights are universal voltage, not multi-tap, and operate on a range of voltage. For alternating current from a range of 90V AC to 305V AC, including commonly found 120V, 220V, 240V, and 277V. For direct current from a range of 127V DC to 431V DC, including 250V DC. This fixture operates on both voltages, automatically sensing incoming voltage and adjusting accordingly, without any adjustments or modifications required.\r\u003cbr\u003eApplication:\r\u003cbr\u003eThese high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  24.8\"-L x 12.46\"-W x 3.54\"-D\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 60,000\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 90-305V AC or 127-431V DC\u003cbr\u003eAmp Draw:  3.34A @ 120V, 1.67A @ 240V, 1.45A @ 277V\u003cbr\u003eWiring:  3` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376340324533,"sku":"PL3-GAU-HB-400W-LED-SS","price":7090.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_49934924-72ff-4e6c-a9e3-168c5be8b40e.png?v=1611872594"},{"product_id":"pl3-gau-hb-400w-led-ss-480v","title":"Larson 480 Watt High Bay LED Light - 60,000 Lumens - 480V AC - Stainless Steel Brackets - Crane Lighting","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-HB-400W-LED-SS-480V High Bay LED Flood Light offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 0.84 amp draw at 480V, 80,000 hour service life, 480 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-HB-400W-LED-SS-480V LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 0.84 amps from a 480 volt electrical system. Forty-eight Cree high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-HB-400W-LED-SS-480V lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003eThe above image shows the comparison of the traditional (16) 1000 watt metal halides light fixtures mounted to a 50` light tower (left) to (16) GAU-HB-400W-LED-SS-480V 480 watt LED light fixtures mounted to a 50` light tower. The area being illuminated by each tower is 500` in length and 300` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-HB-400W-LED-SS-480V series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003eApplication:\r\u003cbr\u003eThese high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  24.8\"-L x 12.46\"-W x 3.54\"-D\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 60,000\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 480 VAC\u003cbr\u003eAmp Draw:  0.84A @ 480V\u003cbr\u003eWiring:  10` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376340390069,"sku":"PL3-GAU-HB-400W-LED-SS-480V","price":8734.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-C-THHN-12-1_185ee330-e3da-46d1-928d-33228580082b.jpg?v=1611872595"},{"product_id":"pl3-gau-hb-600w-led-ss-480v","title":"Larson 480 Watt High Bay LED Light - 60,000 Lumens - 480V AC - Stainless Steel Brackets - Crane Lighting","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-HB-600W-LED-SS-480V High Bay LED Flood Light offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 1.25 amp draw at 480V, 80,000 hour service life, 480 volt compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-HB-600W-LED-SS-480V LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 1.25 amps from a 480 volt electrical system. Forty-eight Cree high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-HB-600W-LED-SS-480V lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-HB-600W-LED-SS-480V series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003eApplication:\r\u003cbr\u003eThese high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  38.6\"-L x 12.46\"-W x 3.54\"-D (w\/o bracket)\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 60,000\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 480 VAC\u003cbr\u003eAmp Draw:  0.84A @ 480V\u003cbr\u003eWiring:  10` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376340422837,"sku":"PL3-GAU-HB-600W-LED-SS-480V","price":12006.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-EMG-EXT-3W-EMB-1IN-1_dff60a15-195b-4e15-a555-09bf09090165.jpg?v=1611872597"},{"product_id":"pl3-gau-hb-400w-led-ss-dns","title":"Larson 480 Watt High Bay LED Light - 120-277V AC\/DC - Crane Lighting - Outdoor Rated - Day\/Night Photocell","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-HB-400W-LED-SS-DNS High Bay LED Flood Light with Day\/Night Photocell offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 3.34 amp draw at 120V, 80,000 hour service life, 120V or 208-277V compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-HB-400W-LED-SS-DNS LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 3.34 amps from a 120 volt electrical system. Forty-eight Cree high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-HB-400W-LED-SS-DNS lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003eThe above image shows the comparison of the traditional (16) 1000 watt metal halides light fixtures mounted to a 50` light tower (left) to (16) GAU-HB-400W-LED-SS-DNS 480 watt LED light fixtures mounted to a 50` light tower. The area being illuminated by each tower is 500` in length and 300` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-HB-400W-LED-SS-DNS series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003eDay\/Night Photocell:\r\u003cbr\u003eThe GAU-HB-400W-LED-SS-DNS features an integrated day\/night photocell that allows for automatic operation of the light when ambient light levels drop below a certain amount such as in low light conditions or at night. This automatic operation of the light adds an additional layer of convenience to this high bay LED light fixture. Operators can adjust the photocell sensor to turn the light on at different ambient light levels to accomodate the specific needs of the location where the light is installed. This feature adds even more versatility to this unit.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eThis fixture operates on 120V or 208-277V.\r\u003cbr\u003eApplication:\r\u003cbr\u003eThese high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  24.8\"-L x 12.46\"-W x 3.54\"-D\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 60,000\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120V or 208-277V\u003cbr\u003eAmp Draw:  3.34A @ 120V, 1.67A @ 240V, 1.45A @ 277V\u003cbr\u003ePhotocell:  Adjustable Day\/Night Photocell\u003cbr\u003eWiring:  3` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376340553909,"sku":"PL3-GAU-HB-400W-LED-SS-DNS","price":7380.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPLC2-QP-2X150LED-100-1.jpg?v=1611872600"},{"product_id":"pl3-exhl-trn-le4-crn-grn-1224","title":"Larson 25W Explosion Proof Green Crane LED Warning Light- C1D1-2 - C2D1-2 - Aluminum Housing - 9-60V DC","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in Texas\r\u003cbr\u003eThe EXHL-TRN-LE4-CRN-GRN-1224 from Larson Electronics is an Explosion Proof Green Crane LED Warning Light that produces 2,250 lumens while drawing only 25 watts. Crane operators may use this compact luminary to notify nearby pedestrians and workers about ongoing crane operations. The EXHL-TRN-LE4-CRN-GRN-1224 is Class I, Divisions 1 \u0026amp; 2, Groups B, C, D, Class I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA, Class II, Divisions 1 \u0026amp; 2, Groups E, F ,G and Class III Divisions 1 \u0026amp; 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof LED light offers 9 to 60-volt universal compatibility, which includes commonly used 12V DC and 24V DC voltages.\r\u003cbr\u003eThe EXHL-TRN-LE4-CRN-GRN-1224 produces 2,250 lumens of intense LED light for real-time visual notification of crane operations. This 25-watt unit, which operates on universal 9-60V DC, features a small form factor (SFF) design for easy installation in tight spaces, making it ideal for applications where electrical power and mounting space is at a premium. Five 5-watt green LEDs provides a high intensity center beam which is visible during daytime and nighttime operations. An adjustable surface mount mechanism allows operators to control the direction of the beam by tilting the unit towards the desired target.\r\u003cbr\u003eStandard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EXHL-TRN-LE4-CRN-GRN-1224 addresses both of the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eThe EXHL-TRN-LE4-CRN-GRN-1224 explosion proof LED light fixture from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) and designed to withstand the rigors of demanding environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are shatterproof borosilicate glass. The LEDs offer inherent LED resistance to shocks and vibrations.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThis explosion proof LED warning light features an adjustable surface mount bracket for seamless control. The included adjustable flat surface bracket has two set screws on the bracket, allowing operators to loosen the mounting bracket, adjust the light`s tilt orientation, and retighten to hold the luminary in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt.\r\u003cbr\u003eWiring:\r\u003cbr\u003eTerminal strips inside the fixture allow operators to make electrical connections. Wiring is fed through rigid pipe to the 3\/4\" NPT hubs on either side of the fixture and tied in to the fixture’s terminal strips, completing the electrical connection.\r\u003cbr\u003eHigh Quality Features\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Low power consumption.\r\u003cbr\u003e1. 50,000+ hour lifespan.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eCrane warning systems, crane notifications, crane safety systems in hazardous locations and industrial environments.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  LED\u003cbr\u003eDimensions:  8\"L x 6\"W x 14\"H\u003cbr\u003eWatts:  25W\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 9-60 Volts DC\u003cbr\u003eLumens:  2,250\u003cbr\u003eLuminous Efficacy:  90 Lm\/W\u003cbr\u003eLED Light Color:  Green\u003cbr\u003eLED Life Expectancy:  50,000 hours\u003cbr\u003eLighting Configuration:  5° Spot \u003cbr\u003eLED Drive %:  90% \u003cbr\u003eAmps:  2.09 @ 12V DC - 1.05 @ 24V DC\u003cbr\u003eAmbient Operating Temp Range: -40°C to +60°C\u003cbr\u003eHousing Material:  Aluminum\u003cbr\u003eLight Housing Color:  Powder Coated - Grey\u003cbr\u003eLens Material:  Borosilicate Glass\u003cbr\u003eMounting:  Adjustable Surface Mount Bracket w\/ Set Screws\u003cbr\u003eWiring Hub:  (2) 3\/4\" NPT\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376362082485,"sku":"PL3-EXHL-TRN-LE4-CRN-GRN-1224","price":4962.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_5366e8b3-4491-4f8b-85d5-ad6ef9ec99c6.png?v=1611872711"},{"product_id":"pl3-epl-tn-crn-red","title":"Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-TN-CRN-RED Explosion Proof LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Division 1 \u0026amp; 2, Groups C,D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: LED (Red)\u003c\/td\u003e\n\u003ctd\u003eClass II Division 1 \u0026amp; 2, Groups F, G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-13 1\/4\"  D-12 1\/2\"  H-11 1\/2\"\u003c\/td\u003e\n\u003ctd\u003eClass III, Division 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 21 Lbs\u003c\/td\u003e\n\u003ctd\u003eUL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 9-60 Volts DC\u003c\/td\u003e\n\u003ctd\u003eUL 1598A - Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 25 watts\u003c\/td\u003e\n\u003ctd\u003eUL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eCSA C22.2 No. 250, 94.0, 213.0, 137.0 \u0026amp; 30.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003eT4 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLed Drive %: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 2.09 @ 12V DC - 1.05 @ 24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Range:T4 rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Permanent Mount Yolk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\n\nThe Larson Electronics EPL-TN-CRN-RED Low Voltage Explosion Proof Red Crane LED Warning Spotlight is approved Class I \u0026amp; II, Division 1 \u0026amp; 2 and is rated for use in wet and marine environments. This red LED spotlight is designed to warn pedestrians and bystanders when in the path of an oncoming crane. This explosion proof LED light produces an 2,250 lumen output with low amp draw, 50,000 hour service life, and 9 to 60 volt compatibility providing operators with a versatile and powerful crane warning safety light. \n\nThe EPL-TN-CRN-RED Red LED Crane Safety Light from Larson Electronics produces 2250 lumen of sharp red light while drawing 2.09 amps from a 12 volt electrical system five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° degree spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp runs cooler than halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace.\nStandard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EPL-TN-CRN-RED addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis lamp can be easily adjusted up or down and locked into position via a side mounted adjustment knob. The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and marine environments. The EPL-TN-CRN-RED lamp assembly includes a 25 watt LED lamp with red LEDs in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp in this unit has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the be dropped or hit, unlike incandescent lamps which may break or shatter.\nDurability: This unit incorporates a 25 watt LED lamp assembly containing five 5-watt high output red LEDs producing 450 lumens each and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3\/4\" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. \nThe EPL-TN-CRN-RED operates on a range of voltages from 9-60 volts DC to provide a lighting solution for areas where explosion proof fixtures are required. This unit`s durability, easy mounting, high power and the good color rendering of its LED lamp make it ideal for close work and hazardous areas where safety, detail and accuracy are critical.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in the USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n1. High Efficiency and Output 70 Watt LED lamp.\n2. 25 Watt Red LED Lamp Provides Cooler Operation.\n3. Rugged Die Cast Aluminum Lamp Housing.\n4. 3\/4\" Shock Resistant Tempered Glass Lens.\n5. Copper Free Shell, Covers and Sealed Fittings. \n6. Vibration\/Impact Resistant Construction.\n7. Low Maintenance.\n8. Permanent Adjustable Yolk Type Mounting\n9. 50,000+ Hour Lamp Life.\n10. UL Listed for Marine Environments.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. Long lamp life.\n2. High efficiency and low amp draw after initial startup.\n3. High durability and reliability.\n4. High output and very good color rendering.\n5. Vibration and shock resistant.\n6. Low maintenance.\n\n\n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 355px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376383283381,"sku":"PL3-EPL-TN-CRN-RED","price":5862.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-TN-CRN-RED.jpg?v=1628372573"},{"product_id":"pl3-ind-crn-fsb-2x320sa-asm","title":"640W High Intensity LED Crane Light - 58,892 lms - Soft Start LEDs - Free Swinging U-bracket Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eIND-CRN-FSB-2X320SA-ASM High Output Crane LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eRatings\/Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLamp Type: CREE XL-L2® LED\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eAutomatic Current Sensing and Adjusting \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: - \u003c\/td\u003e\n\u003ctd\u003eActive Heat Management \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 640W\u003c\/td\u003e\n\u003ctd\u003eIP69K High Temp\/Pressure Wash Down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal Voltage 11-65V DC\u003c\/td\u003e\n\u003ctd\u003eEMC\/EMI CISPR 25 Class 3 Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 58,892\u003c\/td\u003e\n\u003ctd\u003eShock Dampening Mounting System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eCrane Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: White\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Spread: 10° Spot, 40° Flood, 60° Flood, 30°\/60° Elliptical\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency\/LED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 26.66 (on 12 volts) - 13.33 (on 24 volts) \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp: -40°C to +80°C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eMounting: Free Swinging U-bracket Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Gold Plated Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe IND-CRN-FSB-2X320SA-ASM Crane LED Light offers high output from a compact form factor and is ideal for illumination during crane or lifting operations. The 640-watt unit provides 58,892 lumens of white light and features sturdy, anti-shock features for resistance against vibration. Equipped with an aluminum housing and a polycarbonate lens, the IP69K rated LED lamp is secured on a free-swining U-bracket mount.\nThe IND-CRN-FSB-2X320SA-ASM is a high-output LED light for cranes and heavy-duty lifting machines. During use, the LED lamp produces 58,892 lumens of high intensity light while drawing only 640 watts @ 13.33 amps from a 24 volt electrical system. Sixty-four CREE XM-L2® ten watt LEDs producing 920 lumens each are arranged in rows and paired with high purity optics to produce a well focused 10° spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional floodlight versions with a 40° or 60° beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \nIn order to improve resistance against vibration, the LED lamps are protected by anti-shock bushings, located at the ends of the unit. The mounting system is also equipped with anti-shock components to reduce vibration.\nIND-CRN-FSB-2X320SA-ASM lights are ideal replacements for fragile and hot running 400 watt metal halide crane lamps. They offer soft start technology, a small profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting solution for rough applications where power and reliability is critical. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. \n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 200px;\"\u003e\nProtection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the internal components.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\nDurability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40°C to +80°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2® LEDs help these units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive working conditions are encountered. \nMounting: This LED crane light is secured on a free-swinging U-bracket mount, which keeps the unit pointed downwards at all times (without manual adjustment), as the crane`s boom moves up and down. \nNote: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors. \nApplications: Cranes, construction, shipyards, container loading, harbors, lifting operations, power plants, building repair, structure maintenance and more. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376449048757,"sku":"PL3-IND-CRN-FSB-2X320SA-ASM","price":15884.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-CRN-FSB-2X320SA-ASM.jpg?v=1629001724"},{"product_id":"pl3-gau-hb-500w-led","title":"Larson 500 Watt LED Crane Light - 60,000 Lumens - 120-277V AC - Outdoor Rated","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eApplication:\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  24.8\"-L x 12.46\"-W x 3.54\"-D\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 500\u003cbr\u003eTotal Lumens: 62,500\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 90-305V AC or 127-431V DC\u003cbr\u003eAmp Draw:  3.34A @ 120V, 1.67A @ 240V, 1.45A @ 277V\u003cbr\u003eWiring:  6` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket (Powder Coated Steel)\r\u003cbr\u003e            \u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Natural Aluminum\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376460288181,"sku":"PL3-GAU-HB-500W-LED","price":6768.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-120-UV-100-EPP-1_7b5bc6d4-785e-4a98-9c5a-93275b789b35.jpg?v=1611873335"},{"product_id":"pl3-ind-crn-fsb-1x500ltl-led-asm","title":"480W High Intensity LED Crane Light - 64,800 lms - 120-277V - Free Swinging U-bracket Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003e IND-CRN-FSB-1X500LTL-LED-ASM Crane LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eSummary\/Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLamp Technology: CREE® LED\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003e1000 Watt Metal Halide Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: -\u003c\/td\u003e\n\u003ctd\u003eAmbient Op Temp -40C to +80C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003eIdeal for Crane Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-277V AC or 127-431V DC\u003c\/td\u003e\n\u003ctd\u003e98% Transmission High Purity PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 480W\u003c\/td\u003e\n\u003ctd\u003eMultiple LED Banks for Heat Dispersion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 64,800 lms\u003c\/td\u003e\n\u003ctd\u003e135 Lumens Per Watt Efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 135 lm\/w\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 80,000+ Hours\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: 5000K, 4000K or 3000K\u003c\/td\u003e\n\u003ctd\u003e Shock Dampening Mounting System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood or 90° Wide Flood\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmp Draw: 5A @ 120V, 2.5A @ 240V, 2.67A @ 277V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40° C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Die Cast Aluminum Housing, PMMA (Acrylic) Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Natural Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Free Swinging U-bracket Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 2.5` Pigtail w\/ Flying Leads\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"592\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 586px;\"\u003e\nThe IND-CRN-FSB-1X500LTL-LED-ASM High Intensity LED Crane Light offers powerful light output and is ideal for supporting crane and industrial hoisting operations. This LED light provides operators with a rugged and reliable LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. Capable of producing 64,800 lumens with 120-277 volt compatibility, the IP67 waterproof rated LED light is secured on a free swinging U-bracket mount.\nThe IND-CRN-FSB-1X500LTL-LED-ASM produces 64,800 lumens of high intensity light while drawing only 480 watts at 5 amps from a 120 volt electrical system. Forty-eight CREE® high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n IND-CRN-FSB-1X500LTL-LED-ASM lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The robust design and high power of these LED lights also makes them suitable for a wide array of heavy-duty applications, including crane operations. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\nThe above image shows the comparison of the traditional (4) 1500 watt metal halides light fixtures mounted to a 30` light tower (left) to (4) IND-CRN-FSB-1X500LTL-LED-ASM 480 watt LED light fixtures mounted to a 30` light tower. The area being illuminated by each tower is 300` in length and 250` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination. \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\nDurability: As well as unparalleled heat control, the IND-CRN-FSB-1X500LTL-LED-ASM offers IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nWiring: The IND-CRN-FSB-1X500LTL-LED-ASM comes with 2.5' of pigtail wire with flying leads for completing power connections.\nMounting: This LED crane light is secured on a free-swinging U-bracket mount, which keeps the unit pointed downwards at all times (without manual adjustment), as the crane's boom moves up and down.\nApplications: Crane lights, hoisting operations, warehouses, illuminative safety, industrial buildings and more.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376464023733,"sku":"PL3-IND-CRN-FSB-1X500LTL-LED-ASM","price":7334.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-CRN-FSB-1X500LTL-LED-ASM.jpg?v=1629001560"},{"product_id":"pl3-gau-hb-500w-led-ss-asm-250vdc","title":"Larson 480W High Bay LED Light - 60,000 Lumens 250VDC - Stainless Steel Bracket \u0026 Anti Shock Mount - Cranes","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-HB-500W-LED-SS-ASM-250VDC High Bay LED Flood Light offers intense light output and is ideal for flood lighting, crane lighting, light towers, as well as industrial and outdoor lighting applications. Producing 60,000 lumens, a 3.34 amp draw, 80,000 hour service life, 250 volt DC compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-HB-500W-LED-SS-ASM-250VDC LED light from Larson Electronics produces 60,000 lumens of high intensity light while drawing only 480 watts at 3.34 amps from a 250 volt electrical system. Forty-eight Cree high output LEDs producing 1250 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-HB-500W-LED-SS-ASM-250VDC lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile stainless steel mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003eThe above image shows the comparison of the traditional (16) 1000 watt metal halides light fixtures mounted to a 50` light tower (left) to (16) GAU-HB-500W-LED-SS-ASM-250VDC 480 watt LED light fixtures mounted to a 50` light tower. The area being illuminated by each tower is 500` in length and 300` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-HB-500W-LED-SS-ASM-250VDC series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The Cree LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket constructed of 304 stainless steel that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. The bracket includes anti shock mounts to reduce vibration to the light and prolong the lifespan. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eThese lights are universal voltage, not multi-tap, and operate on 250V DC. This fixture automatically sensing incoming voltage and adjusting accordingly, without any adjustments or modifications required.\r\u003cbr\u003eApplication:\r\u003cbr\u003eThese high output LED fight fixtures are idea for applications such as light towers, cranes, offshore, mining, and any application requiring high output and quality lighting. These are the same LED lights we use on our LED Mega Tower Series, including the\r\u003cbr\u003eWCDE-11-PLM50-16X400LTL-LED\r\u003cbr\u003eself contained diesel light plant and\r\u003cbr\u003eLM-50-5S-TLR-16X400LTL-LED\r\u003cbr\u003elight plant.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  Cree LED\u003cbr\u003eDimensions:  24.8\"-L x 12.46\"-W x 3.54\"-D\u003cbr\u003eWeight: 36.38 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 60,000\u003cbr\u003eLuminous Efficiency: 125 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 250V DC\u003cbr\u003eAmp Draw:  3.34A @ 120V, 1.67A @ 240V, 1.45A @ 277V\u003cbr\u003eWiring:  3` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket - 304 Stainless Steel\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38376465563829,"sku":"PL3-GAU-HB-500W-LED-SS-ASM-250VDC","price":9374.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPEXC-20-2X20A-12.3-1_401efda5-5435-4d6a-b130-9555625fbaab.jpg?v=1611873372"},{"product_id":"pl3-ind-crn-fsb-1x320sa-asm","title":"320W High Intensity LED Crane Light - 29,446 lms - Soft Start LEDs - Free Swinging U-bracket Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eIND-CRN-FSB-1X320SA-ASM High Output Crane LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eRatings\/Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLamp Type: CREE XL-L2® LED\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eAutomatic Current Sensing and Adjusting \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: - \u003c\/td\u003e\n\u003ctd\u003eActive Heat Management \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 320W\u003c\/td\u003e\n\u003ctd\u003eIP69K High Temp\/Pressure Wash Down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal Voltage 11-65V DC\u003c\/td\u003e\n\u003ctd\u003eEMC\/EMI CISPR 25 Class 3 Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 29,446\u003c\/td\u003e\n\u003ctd\u003eShock Dampening Mounting System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eCrane Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: White\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Spread: 10° Spot, 40° Flood, 60° Flood, 30°\/60° Elliptical\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency\/LED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 13.33 (on 12 volts) - 6.665 (on 24 volts) \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp: -40°C to +80°C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Free Swinging U-bracket Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Gold Plated Deutsch IPD \/ LADD DT04-2P connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe IND-CRN-FSB-1X320SA-ASM Crane LED Light offers high output from a compact form factor and is ideal for illumination during crane or lifting operations. The 320-watt unit provides 29,446 lumens of white light and features sturdy, anti-shock features for resistance against vibration. Equipped with an aluminum housing and a polycarbonate lens, the IP69K rated LED lamp is secured on a free-swining U-bracket mount.\nThe IND-CRN-FSB-1X320SA-ASM is a high-output LED light for cranes and heavy-duty lifting machines. During use, the LED lamp produces 29,446 lumens of high intensity light while drawing only 320 watts @ 6.665 amps from a 24 volt electrical system. Thirty-two CREE XM-L2® ten watt LEDs producing 920 lumens each are arranged in rows and paired with high purity optics to produce a well focused 10° spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional floodlight versions with a 40° or 60° beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. \nIn order to improve resistance against vibration, the LED lamps are protected by anti-shock bushings, located at the ends of the unit. The mounting system is also equipped with anti-shock components to reduce vibration.\nIND-CRN-FSB-1X320SA-ASM lights are ideal replacements for fragile and hot running 400 watt metal halide crane lamps. They offer soft start technology, a small profile, low power requirements, high durability and a shock dampening mounting system that makes these LED light emitters a superior lighting solution for rough applications where power and reliability is critical. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. \n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 200px;\"\u003e\nProtection: These high output LED light bars feature soft start technology, allowing the LEDs to gradually increase to maximum intensity instead. Low in rush current at start-up reduces wear on associated components, increasing overall life of the internal electronics and improves downtime. Built in redundancy lessens chance of full fixture failure, while the reverse polarity operation protects the fixture from shorting the internal components.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nVoltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10WSA series light bars can operate on current ranging from 11 to 65 VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\nDurability: As well as unparalleled heat control, the LED10WSA series of LED lights from Larson Electronics also offer IP69K rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40°C to +80°C, are waterproof to three meters, can withstand high pressure and high temperature wash downs, and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XM-L2® LEDs help these units achieve up to 60Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications that require regular intensive cleaning and are exposed to a lot of vibration, dust, dirt, and abusive working conditions are encountered. \nMounting: This LED crane light is secured on a free-swinging U-bracket mount, which keeps the unit pointed downwards at all times (without manual adjustment), as the crane`s boom moves up and down. \nNote: The LED10WSA series feature gold plated DT connectors to provide better conductivity. Most Larson Electronics LEDP5W-30, LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors. \nApplications: Cranes, construction, shipyards, container loading, harbors, lifting operations, power plants, building repair, structure maintenance and more. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376473854133,"sku":"PL3-IND-CRN-FSB-1X320SA-ASM","price":9884.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-CRN-FSB-1X320SA-ASM.jpg?v=1629001554"},{"product_id":"pl3-gau-hb-60x5w-480v","title":"300 Watt LED Crane \u0026 Rough Service Fixture - 480V AC - 1000W Metal Halide Equivalent - 29,580 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eGAU-HB-60X5W-480V\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eInternal LED Driver Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLamp Type: CREE XLamp-XPG® LED\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eActive Heat Management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 22.69 \"-L  22.69\"-H   4.94\"-D\u003c\/td\u003e\n \u003ctd\u003eAmbient Op Temp -40C to +80C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 35 Lbs\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:480V AC 3P \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 300\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 29,580\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Temp: 6000K\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLighting Configuration: 60° Flood or 25° Spot \u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLed Drive %: 90%\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 0.7 (on 480 volts) \u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Colors: Black\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Flat Surface 360 Degree Vertical Adjustable\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 10ft cable w\/ flying leads\u003c\/td\u003e\n\u003ctd\u003eE-mail: \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe GAU-HB-60X5W-480V High Output Crane and Rough Service LED Light offers high output and energy efficient alternative to traditional general area luminaries. LED technology and compact design makes this lamp an excellent energy efficient upgrade option for bulky and high maintenance cost older fixtures. A 29,580 lumen output, 0.7 amp draw, 50,000 hour service life, and 480 volt compatibility provides mine operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions. \n \nThe GAU-HB-60X5W-480V crane and rough service LED light from Larson Electronics produces 29,580 lumens of high intensity light while drawing only 300 watts @0.7 amps from a 480 volt electrical system. Sixty CREE XLamp XPG® five watt LEDs producing 493 lumens each are arranged in rows and paired with high purity optics to produce a well focused 25 degree spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional floodlight versions with a 60 degree beam spread to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights. These LED light bars are waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding mining environments, conditions and applications. \nGAU-HB-60X5W-480V LED lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer Pulse Width Modulation control, a small profile, low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for mining applications where power and reliability is critical. The heavy duty design and high power of these mining lights also makes them suitable for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, and commercial structure illumination. \n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nPWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These GAU-HB-60X5W-480V high bay lights can operate on 480V AC three phase without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.\n\nDurability: As well as unparalleled heat control, the GAU-HB-60X5W-480V series of LED high bay lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 80 degrees Celsius, are waterproof to three meters, and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XPG® LEDs help these units achieve 15.6Grms rated resistance to vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Each unit is equipped with an innovative trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 360 degrees of vertical movement. To adjust the unit after mounting, the user simply loosens the thumb screws located on either side of the unit, moves it into the desired position, then retightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning. \n \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"background-color: #ffff00;\"\u003eCONDITIONS \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable bordercolor=\"#ffffff\" width=\"100%\" border=\"1\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; width: 36%;\"\u003eVin min (V) = 9\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000; width: 64%;\"\u003etoff (us) = 2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVin nom (V) = 12\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eR1 (kohm) = 50.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVin max (V) = 50\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL1 (uH) = 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo min (V) = 6.5\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL-Pk (A) = 2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo nom (V) = 6.8\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eL-rms (A) = 2.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eVo max (V) = 7\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eIpk (A) = 2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eI-LED (A) = 2.2\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eR2 (ohm) = 0.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eEfficiency = .85\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003eI-FET (A) = 2.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003efsw nom (kHz) = 150\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003efs min (kHz) = 77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eTs nom (us) = 6.666667 \u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003efs max (kHz) = 301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eBase frequency-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e= 36~37Khz @ 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eAmplitude of pulse width-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e= 27Ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eOutside: External dimmer-\u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e= 500Hz \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border-color: #000000; height: 14px;\"\u003eInside : Current sensing from- \u003c\/td\u003e\n\u003ctd style=\"border-color: #000000;\"\u003e77KHz at 12V to 300KHz at 50V \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376483979445,"sku":"PL3-GAU-HB-60X5W-480V","price":7058.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-60X5W-480V.jpg?v=1629001472"},{"product_id":"pl3-exhl-trn-le4-crn-red-1224","title":"25W Explosion Proof Red Crane LED Warning Light- C1D1-2 - C2D1-2 - Aluminum Housing - 9-60V DC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eEXHL-TRN-LE4-CRN-RED-1224 25W Explosion Proof Red Crane LED Warning Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eListed for United States \u0026amp; Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8\"L x 6\"W x 14\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 9-60 Volts DC\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E, F, G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA 3R, 4, 7 (B, C, D), 9 (E, F, G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to UL 508A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to UL 1203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 5° Spot \u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to CSA C22.2 No 14, 25, 30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive %: 90% \u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Crane Operations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 2.09 @ 12V DC - 1.05 @ 24V DC\u003c\/td\u003e\n\u003ctd\u003eSupport Crane Warning Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40°C to +60°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Housing Color: Powder Coated - Grey\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Surface Mount Bracket w\/ Set Screws\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: (2) 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas\nThe EXHL-TRN-LE4-CRN-RED-1224 from Larson Electronics is an Explosion Proof Red Crane LED Warning Light that produces 2,250 lumens while drawing only 25 watts. Crane operators may use this compact luminary to notify nearby pedestrians and workers about ongoing crane operations. The EXHL-TRN-LE4-CRN-RED-1224 is Class I, Divisions 1 \u0026amp; 2, Groups B, C, D, Class I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA, Class II, Divisions 1 \u0026amp; 2, Groups E, F ,G and Class III Divisions 1 \u0026amp; 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof LED light offers 9 to 60-volt universal compatibility, which includes commonly used 12V DC and 24V DC voltages.\nThe EXHL-TRN-LE4-CRN-RED-1224 produces 2,250 lumens of intense LED light for real-time visual notification of crane operations. This 25-watt unit, which operates on universal 9-60V DC, features a small form factor (SFF) design for easy installation in tight spaces, making it ideal for applications where electrical power and mounting space is at a premium. Five 5-watt red LEDs provides a high intensity center beam which is visible during daytime and nighttime operations. An adjustable surface mount mechanism allows operators to control the direction of the beam by tilting the unit towards the desired target.\nStandard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EXHL-TRN-LE4-CRN-RED-1224 addresses both of the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nDurability: The EXHL-TRN-LE4-CRN-RED-1224 explosion proof LED light fixture from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) and designed to withstand the rigors of demanding environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are shatterproof borosilicate glass. The LEDs offer inherent LED resistance to shocks and vibrations.\nMounting: This explosion proof LED warning light features an adjustable surface mount bracket for seamless control. The included adjustable flat surface bracket has two set screws on the bracket, allowing operators to loosen the mounting bracket, adjust the light`s tilt orientation, and retighten to hold the luminary in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt. \nWiring: Terminal strips inside the fixture allow operators to make electrical connections. Wiring is fed through rigid pipe to the 3\/4\" NPT hubs on either side of the fixture and tied in to the fixture’s terminal strips, completing the electrical connection. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 70% lumen output after 50,000 operating hours.\n6. Powder coated aluminum fixture body. \n 7. Adjustable surface mount bracket w\/ set screws.\n8. Low profile - Light weight\n9. 2,250 Lumen output from 25 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000+ hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\nApplications: Crane warning systems, crane notifications, crane safety systems in hazardous locations and industrial environments. \n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376493416629,"sku":"PL3-EXHL-TRN-LE4-CRN-RED-1224","price":5416.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EXHL-TRN-LE4-CRN-RED-1224.jpg?v=1629079749"},{"product_id":"pl3-epl-tn-crn-red-1227","title":"25W Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 2250 Lumens - 120-240VAC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-TN-CRN-RED-1227 Explosion Proof LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eU.L. Ratings\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I, Divisions 1 \u0026amp; 2, Groups C \u0026amp; D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: LED (Red)\u003c\/td\u003e\n\u003ctd\u003eClass II Divisions 1 \u0026amp; 2, Groups F \u0026amp; G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 13.25\"W x 12.5\"D x 11.5\"H\u003c\/td\u003e\n\u003ctd\u003eClass III, Division 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 21 lbs\u003c\/td\u003e\n\u003ctd\u003eUL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-240V AC\u003c\/td\u003e\n\u003ctd\u003eUL 1598A - Marine Type (Saltwater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 25 Watts\u003c\/td\u003e\n\u003ctd\u003eUL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eCSA C22.2 No. 250, 94.0, 213.0, 137.0 \u0026amp; 30.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: Red\u003c\/td\u003e\n\u003ctd\u003eT4 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLed Drive %: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: .208 @ 120V AC - .104 @ 240V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Range: T4 rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Permanent Mount Yolk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\n\nThe Larson Electronics EPL-TN-CRN-RED-1227 Explosion Proof Red Crane LED Warning Spotlight is approved Class I \u0026amp; II, Divisions 1 \u0026amp; 2 and is rated for use in wet and marine environments. This red LED spotlight is designed to warn pedestrians and bystanders when in the path of an oncoming crane. This explosion proof LED light produces an 2,250 lumen output with low amp draw, 50,000 hour service life, and 120 to 240 volt AC compatibility providing operators with a versatile and powerful crane warning safety light. \n\nThe EPL-TN-CRN-RED-1227 Red LED Crane Safety Light from Larson Electronics produces 2250 lumens of sharp red light while drawing .208 amps from a 120 volt electrical system. Five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° degree spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp runs cooler than halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace.\nStandard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EPL-TN-CRN-RED-1227 addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nThis lamp can be easily adjusted up or down and locked into position via a side mounted adjustment knob. The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and marine environments. The EPL-TN-CRN-RED-1227 lamp assembly includes a 25 watt LED lamp with red LEDs in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp in this unit has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the be dropped or hit, unlike incandescent lamps which may break or shatter.\nDurability: This unit incorporates a 25 watt LED lamp assembly containing five 5-watt high output red LEDs producing 450 lumens each and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3\/4\" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. \nThe EPL-TN-CRN-RED-1227 operates on a range of voltages from 120-240 volts AC to provide a lighting solution for areas where explosion proof fixtures are required. This unit`s durability, easy mounting, high power and the good color rendering of its LED lamp make it ideal for close work and hazardous areas where safety, detail and accuracy are critical.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in the USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eLED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n1. High Efficiency and Output 70 Watt LED lamp.\n2. 25 Watt Red LED Lamp Provides Cooler Operation.\n 3. Rugged Die Cast Aluminum Lamp Housing.\n4. 3\/4\" Shock Resistant Tempered Glass Lens.\n5. Copper Free Shell, Covers and Sealed Fittings. \n6. Vibration\/Impact Resistant Construction. \n7. Low Maintenance.\n8. Permanent Adjustable Yolk Type Mounting\n9. 50,000+ Hour Lamp Life.\n10. UL Listed for Marine Environments.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. Long lamp life.\n2. High efficiency and low amp draw after initial startup.\n3. High durability and reliability.\n4. High output and very good color rendering.\n5. Vibration and shock resistant.\n6. Low maintenance.\n\n\n\n\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 355px;\"\u003e\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376495415477,"sku":"PL3-EPL-TN-CRN-RED-1227","price":6118.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-TN-CRN-RED-1227.jpg?v=1628397523"},{"product_id":"pl3-exhl-trn-le4-crn-amb-1224","title":"25W Explosion Proof Amber Crane LED Warning Light- C1D1-2 - C2D1-2 - Aluminum Housing - 9-60V DC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eEXHL-TRN-LE4-CRN-AMB-1224 25W Explosion Proof Amber Crane LED Warning Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings \/ Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eListing: NRTL Listed for Listed for United States, Canada, Europe, Asia\u003c\/td\u003e\n\u003ctd\u003eListed for United States \u0026amp; Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Technology: LED\u003c\/td\u003e\n\u003ctd\u003eClass I, Divisions 1 \u0026amp; 2, Groups B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8\"L x 6\"W x 14\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 25W\u003c\/td\u003e\n\u003ctd\u003eClass II, Divisions 1 \u0026amp; 2, Groups E, F, G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Universal 9-60V DC\u003c\/td\u003e\n\u003ctd\u003eClass III, Divisions 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,250\u003c\/td\u003e\n\u003ctd\u003eNEMA 3R, 4, 7 (B, C, D), 9 (E, F, G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 90 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to UL 508A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to UL 1203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor: Amber\u003c\/td\u003e\n\u003ctd\u003eNRTL Listed to CSA C22.2 No 14, 25, 30\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003eWarn Pedestrians of Crane Operations\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003eSupport Crane Warning Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle: 5° \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Spot \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90% \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 2.09 @ 12V DC - 1.05 @ 24V DC\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd\u003eAmbient Operating Temp Range: -40°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Housing Color: Powder Coated - Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Borosilicate Glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Surface Mount Bracket w\/ Set Screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: (2) 3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas\nThe EXHL-TRN-LE4-CRN-AMB-1224 from Larson Electronics is an Explosion Proof Amber Crane LED Warning Light that produces 2,250 lumens while drawing only 25 watts. Crane operators may use this compact luminary to notify nearby pedestrians and workers about ongoing crane operations. The EXHL-TRN-LE4-CRN-AMB-1224 is Class I, Divisions 1 \u0026amp; 2, Groups B, C, D, Class I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA, Class II, Divisions 1 \u0026amp; 2, Groups E, F ,G and Class III Divisions 1 \u0026amp; 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof LED light offers 9 to 60-volt universal compatibility, which includes commonly used 12V DC and 24V DC voltages.\nThe EXHL-TRN-LE4-CRN-AMB-1224 produces 2,250 lumens of intense LED light for real-time visual notification of crane operations. This 25-watt unit, which operates on universal 9-60V DC, features a small form factor (SFF) design for easy installation in tight spaces, making it ideal for applications where electrical power and mounting space is at a premium. Five 5-watt amber LEDs provides a high intensity center beam which is visible during daytime and nighttime operations. An adjustable surface mount mechanism allows operators to control the direction of the beam by tilting the unit towards the desired target.\nStandard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EXHL-TRN-LE4-CRN-AMB-1224 addresses both of the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nDurability: The EXHL-TRN-LE4-CRN-AMB-1224 explosion proof LED light fixture from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) and designed to withstand the rigors of demanding environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are shatterproof borosilicate glass. The LEDs offer inherent LED resistance to shocks and vibrations.\nMounting: This explosion proof LED warning light features an adjustable surface mount bracket for seamless control. The included adjustable flat surface bracket has two set screws on the bracket, allowing operators to loosen the mounting bracket, adjust the light`s tilt orientation, and re-tighten to hold the luminary in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt. \nWiring: Terminal strips inside the fixture allow operators to make electrical connections. Wiring is fed through rigid pipe to the 3\/4\" NPT hubs on either side of the fixture and tied in to the fixture’s terminal strips, completing the electrical connection. \nApplications: Crane warning systems, crane notifications, crane safety systems in hazardous locations and industrial environments. \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38376496758965,"sku":"PL3-EXHL-TRN-LE4-CRN-AMB-1224","price":5416.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EXHL-TRN-LE4-CRN-AMB-1224.jpg?v=1629079715"},{"product_id":"pl3-smlp-4x500ltl-led-480v","title":"1920W Skid Mount LED Light Plant - 6 LED Fixtures - Crane Stadium Flood Lights - 480V AC 3-Phase","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eSMLP-4X500LTL-LED-480V 1920W Skid Mount LED Light Plant - 4 LED Fixtures - 480VAC Line-in \u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eUnit Type: LED Light Plant\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eWide\/Extreme Area Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 62\"x52\"x36\"\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 350 Lbs \u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 480V AC 3-Phase\u003c\/td\u003e\n\u003ctd\u003eIP67 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:1,920 (480 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003ePicking Eyes for Crane Hoisting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 259,2000 (64,800 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLife Expectancy: 80,000+ hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configurations: Flood Beam\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: Cool White - 5500-6500K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Range: -40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Die Cast Aluminum Housing, PMMA Optics\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Skid Mount w\/ Skid Pockets and Picking Eyes \u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting Material: Carbon Steel \u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Customer provided\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe SMLP-4X500LTL-LED-480V Skid Mount LED Light Plant by Larson Electronics is a massive 1,920-watt lighting system that is suitable for stadium lighting, crane rig lighting, outdoor events and more. This unit contains 4, 480-watt LED fixtures and operates on 480V AC line-in power. Capable of emitting 259,200 lumens, the light plant is mounted on a carbon steel, cube-style platform with picking eyes for seamless hoisting and transportation. \nThe SMLP-4X500LTL-LED-480V light plant is equipped with 4, 480-watt LED lamps (total of 1,920 watts) for superior lighting in industrial environments. During operation, this unit emits a cool white light at 259,200 lumens in a flood beam configuration for wide area lighting. The light plant runs on 480V AC line-in power and the cable is customer provided for connection to compatible power sources. When in use, the LED light plant can light up between 5-7 acres and reach targets from distances up to 1,000 feet. This caged lighting system is designed to illuminate targets from an elevated position. Reflectors around each lamp help focus and amplify illumination during operation. Hooking and securing components around the mount allow operators to raise the unit safely. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounted to Crane\u003c\/td\u003e\n\u003ctd\u003eForklift Skid Pockets\u003c\/td\u003e\n\u003ctd\u003eFour Corner Eyelets\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGround Terminal\u003c\/td\u003e\n\u003ctd\u003eFused Disconnect\u003c\/td\u003e\n\u003ctd\u003eBack of Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis unit uses 4 GAU-LTL-500W-LED lamps from Larson Electronics, which individually produces 64,800 lumens of high intensity light while drawing only 480 watts. Forty-Eight CREE® high output LEDs producing 1,406 lumens each are arranged in rows and paired with PMMA high purity optics to produce a flood-configured beam. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\nDurability: As well as unparalleled heat control, the LED lights on this unit also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Unlike many caged lighting boxes made of plastic and utilizing thin gauge, low grade metals in their construction, the SMLP-4X500LTL-LED-480V is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The LED lighting system is mounted on a cube-style thick carbon steel mounting platform, resulting in an extremely stable, durable and well protected unit. This model is equipped with picking eyes, which can be used for crane hoisting. Forklift skid pockets, locking casters and a top located lifting eyelet are also available, allowing easy lifting with forklifts, cable or chain hooks. \nApplications: Stadium lighting, offshore lighting, crane lighting, cage mounted lighting, outdoor events, construction site lighting, emergency camps and large-scale industrial sites. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38385236148405,"sku":"PL3-SMLP-4X500LTL-LED-480V","price":27764.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SMLP-4X500LTL-LED-480V.jpg?v=1629079547"},{"product_id":"pl3-smlp-hdpt-16x500ltl-led-480v","title":"7680W Heavy Duty Pole Mount LED Light Plant - (16) 480W LED Fixtures - 480V AC 3-Phase - Crane Light","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eSMLP-HDPT-16X500LTL-LED-480V 7680W Cube Mount LED Light Plant\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eWide\/Extreme Area Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 90\"H x 123.6\"W x 50\"D\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 480V AC 3-Phase\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:7,680\u003c\/td\u003e\n\u003ctd\u003eIP67 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts Per Lamp: 480W \u003c\/td\u003e\n\u003ctd\u003ePicking Eyes for Crane Hoisting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 1,036,800 (64,800 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLife Expectancy: 80,000+ hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configurations: Flood Beam\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: Cool White - 5500-6500K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Range: -40°C to +80°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Die Cast Aluminum Housing, PMMA Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Heavy Duty Pole Mount \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting Material: Carbon Steel \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Customer provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 1200 Lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in Texas\nThe SMLP-HDPT-16X500LTL-LED-480V Heavy Duty Pole Mount LED Light Plant by Larson Electronics is a massive 7,680-watt lighting system that is suitable for stadium lighting, crane rig lighting, outdoor events and more. This unit contains 16, 480-watt LED fixtures and operates on 480V AC 3-phase. Capable of emitting 1,036,800 lumens, the light head assembly features a heavy duty pole mount for mounting on utility poles and similar strutures.\nThe SMLP-HDPT-16X500LTL-LED-480V skid mounted light plant is equipped with 16, 480-watt LED lamps (total of 7,680 watts) for superior lighting in industrial environments. During operation, this unit emits a cool white light at 1,036,800 lumens in a flood beam configuration for wide area lighting. The light plant runs on 480V AC 3-phase via customer provided line-in cord. When in use, the LED light plant can light up between 7-70 acres and reach targets from distances up to 1,000 feet. This caged lighting system is designed to illuminate targets from an elevated position. Reflectors around each lamp help focus and amplify illumination during operation. Hooking and securing components around the mount allow operators to raise the unit safely. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGround Terminal\u003c\/td\u003e\n\u003ctd\u003eFused Disconnect\u003c\/td\u003e\n\u003ctd\u003eBack of Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis unit uses 16 GAU-LTL-500W-LED LED light from Larson Electronics, which individually produces 64,800 lumens of high intensity light while drawing only 480 watts. Fourty-Eight CREE® high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a flood-configured beam. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\nDurability: As well as unparalleled heat control, the LED lights on this unit also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Unlike many caged lighting boxes made of plastic and utilizing thin gauge, low grade metals in their construction, the SMLP-HDPT-16X500LTL-LED-480V is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The LED lighting system features a heavy duty pole mount for use with utility poles and other similar structures. The mount accept 12\" to 13\" OD poles and has two points of attachment, one at the top and one at the bottom of the frame.\nApplications: Stadium lighting, offshore lighting, crane lighting, cage mounted lighting, outdoor events, construction site lighting, emergency camps and large-scale industrial sites. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38385306697909,"sku":"PL3-SMLP-HDPT-16X500LTL-LED-480V","price":91700.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SMLP-HDPT-16X500LTL-LED-480V.jpg?v=1629342013"},{"product_id":"pl3-smlp-fcm-16x500ltl-led","title":"7680W Crane Mount LED Light Plant - (16) 480W LED Fixtures - Single Phase - Adjustable Assemblies","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eSMLP-FCM-16X500LTL-LED 7680W Crane Mount LED Light Plant - (16) 480W LED Fixtures - Single PH - Adjustable Assemblies\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eUnit Type: LED Light Plant\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eWide\/Extreme Area Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 64.25\" x 73.5\" x 58.76\"\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 208V AC, 240V AC or 277V AC (Single Phase)\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:7,680\u003c\/td\u003e\n\u003ctd\u003eIP67 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts Per Lamp: 480 (16)\u003c\/td\u003e\n\u003ctd\u003ePicking Eyes for Crane Hoisting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 1,036,800 (64,800 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003eAdjustable Light Positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLife Expectancy: 80,000+ hours\u003c\/td\u003e\n\u003ctd\u003eCollapsible for Seamless Storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configuration: Flood Beam\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePositioning\/Tilt: Upright, 45°, 60°, 75°, and 90° (Straight Down)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: Cool White - 5500-6500K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Range: -40°C to +80°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Die Cast Aluminum Housing, PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Cube Mount w\/ Skid Pockets and Picking Eyes \u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting Material: Carbon Steel \u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Customer Provided Line-in Cord\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 350 Lbs\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe SMLP-FCM-16X500LTL-LED Crane Mount LED Light Plant by Larson Electronics is a massive 7,680-watt lighting system that is suitable for stadium lighting, crane rig lighting, outdoor events and more. Capable of emitting 1,036,8000 lumens, the light mast is mounted on a carbon steel, cube-style platform with picking eyes for seamless hoisting and transportation. This unit contains 16, 480-watt LED fixtures that operates on 208V AC, 240V AC, or 277V AC single phase via a customer provided line-in cord (please select the preferred voltage below). \nThe SMLP-FCM-16X500LTL-LED light plant is equipped with 16, 480-watt LED lamps (total of 7,680 watts) for superior lighting in industrial environments and large outdoor spaces. During operation, this unit emits a cool white light at 1,036,800 lumens in a flood beam configuration for wide area lighting. The light plant runs on 208V AC, 240V AC, or 277V AC single phase line-in power (via a customer provided line-in cord). \nWhen in use, the LED light plant can light up between 7-70 acres and reach targets from distances up to 1,000 feet. This caged lighting system is designed to illuminate targets from an elevated position. Reflectors around each lamp help focus and amplify illumination during operation. Hooking and securing components around the mount allow operators to raise the unit safely. Operators have the option to lock in the light assemblies in five different positions: upright for storage, 45°, 60°, 75°, and 90° (straight down). Pick eyes located on top and sides of the unit are available for hanging in elevated positions for downward illumination. The LED fixtures may be set to different degrees for setting light distribution. Alternatively, the unit may also be set on its side. \nThis unit uses 16 GAU-LTL-500W-LED lamps from Larson Electronics, which individually produces 64,800 lumens of high intensity light while drawing only 480 watts. Fourty-Eight CREE® high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a flood-configured beam. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. \n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\nDurability: As well as unparalleled heat control, the LED lights on this unit also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Unlike many caged lighting boxes made of plastic and utilizing thin gauge, low grade metals in their construction, the SMLP-FCM-16X500LTL-LED is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The LED lighting system is mounted on a cube-style thick carbon steel mounting platform, resulting in an extremely stable, durable and well protected unit. This model is equipped with picking eyes, which can be used for crane hoisting. Forklift skid pockets, locking casters and a top located lifting eyelet are also available, allowing easy lifting with forklifts, cable or chain hooks. \nApplications: Stadium lighting, offshore lighting, crane rig lighting, cage mounted lighting, outdoor events, construction site lighting, emergency camps and large-scale industrial sites. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38385309876405,"sku":"PL3-SMLP-FCM-16X500LTL-LED","price":88670.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SMLP-FCM-16X500LTL-LED.jpg?v=1628906258"},{"product_id":"pl3-smlp-12x500ltl-led-480v","title":"5760W Skid Mount LED Light Plant - 12 LED Fixtures - Crane Stadium Flood Lights - 480V AC 3-Phase","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eSMLP-12X500LTL-LED-480V 5760W Skid Mount LED Light Plant - 12 LED Fixtures - 480VAC Line-in \u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eUnit Type: LED Light Plant\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eWide\/Extreme Area Coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:122\"x70.5\"x36\"\u003c\/td\u003e\n\u003ctd\u003eHeavy Duty Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 650 Lbs\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention after 80,000 Hours \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 480V AC Line-in Power\u003c\/td\u003e\n\u003ctd\u003eIP67 Waterproof \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts:5,760 (480 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003ePicking Eyes for Crane Hoisting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 777,600 (64,800 Per Lamp)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLife Expectancy: 80,000+ hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Configurations: Flood Beam\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Color Temperature: Cool White - 5500-6500K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Drive: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Temperature Range: -40°C to +80°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Die Cast Aluminum Housing, PMMA Optics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Skid Mount w\/ Skid Pockets and Picking Eyes \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting Material: Carbon Steel \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: Customer provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWarranty: Yes - 3 Years*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe SMLP-12X500LTL-LED-480V Skid Mount LED Light Plant by Larson Electronics is a massive 5,760-watt lighting system that is suitable for stadium lighting, crane rig lighting, outdoor events and more. This unit contains 12, 480-watt LED fixtures and operates on 480V AC line-in power. Capable of emitting 810,000 lumens, the light plant is mounted on a carbon steel, cube-style platform with picking eyes for seamless hoisting and transportation. \nThe SMLP-12X500LTL-LED-480V light plant is equipped with 12, 480-watt LED lamps (total of 5,760 watts) for superior lighting in industrial environments. During operation, this unit emits a cool white light at 777,600 lumens in a flood beam configuration for wide area lighting. The light plant runs on 480V AC line-in power and the cable is customer provided for connection to compatible power sources. When in use, the LED light plant can light up between 10-50 acres and reach targets from distances up to 1,000 feet. This caged lighting system is designed to illuminate targets from an elevated position. Reflectors around each lamp help focus and amplify illumination during operation. Hooking and securing components around the mount allow operators to raise the unit safely. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounted to Crane\u003c\/td\u003e\n\u003ctd\u003eForklift Skid Pockets\u003c\/td\u003e\n\u003ctd\u003eFour Corner Eyelets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGround Terminal\u003c\/td\u003e\n\u003ctd\u003eFused Disconnect\u003c\/td\u003e\n\u003ctd\u003eBack of Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThis unit uses 12 GAU-LTL-500W-LED lamps from Larson Electronics, which individually produces 64,800 lumens of high intensity light while drawing only 480 watts. Forty-Eight CREE® high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a flood-configured beam. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\nDurability: As well as unparalleled heat control, the LED lights on this unit also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE® LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered. \nMounting: Unlike many caged lighting boxes made of plastic and utilizing thin gauge, low grade metals in their construction, the SMLP-12X500LTL-LED-480V is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The LED lighting system is mounted on a cube-style thick carbon steel mounting platform, resulting in an extremely stable, durable and well protected unit. This model is equipped with picking eyes, which can be used for crane hoisting. Forklift skid pockets, locking casters and a top located lifting eyelet are also available, allowing easy lifting with forklifts, cable or chain hooks. \nApplications: Stadium lighting, offshore lighting, crane lighting, cage mounted lighting, outdoor events, construction site lighting, emergency camps and large-scale industrial sites. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38385330880693,"sku":"PL3-SMLP-12X500LTL-LED-480V","price":64016.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SMLP-12X500LTL-LED-480V.jpg?v=1629342009"},{"product_id":"pl3-gau-led-160w-rt-480v","title":"150 Watt Crane LED Flood Light - 480V - Surface Mount Trunnion - 17,500 Lumens - IP67 Waterproof","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-LED-160W-RT-480V Explosion Proof LED Flood Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eListing: United States - Canada\u003c\/td\u003e\n\u003ctd\u003eListed for United States and Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eCertified to UL 1598\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 14\"H x 16\"W 5\"D\u003c\/td\u003e\n\u003ctd\u003eCertified to C22.2 No. 250.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 32 lbs\u003c\/td\u003e\n\u003ctd\u003eT5 Temperature Rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 347-480V AC\u003c\/td\u003e\n\u003ctd\u003eIEC 60529 Tested\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003eIP67 Rated Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 17,500\u003c\/td\u003e\n\u003ctd\u003eLEL Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: 116.67 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eMultiple Driver Banks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life: 60,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e80% Lumen Retention after 60,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5000K, 4000K, 3000K\u003c\/td\u003e\n\u003ctd\u003eFactory Sealed Light Fixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: 60° or 125°\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency: \u0026gt;95%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor: 0.992\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmperage: 1.25A @ 120V, 0.63 @ 240V, 0.54 @ 277V\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-50° C to +65°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Rating: T5\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Copper Free Cast Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Hardened Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Material: Silicone\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Flat Surface Mount U-Bracket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ Flying Leads\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Hub: 3\/4\" NPT\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Driver Specs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage: 100-277 Volts AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current: 1.8A Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage: 54V Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Current: 2.1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics GAU-LED-160W-RT-480V Outdoor Rated Crane LED Flood Light fixture provides operators with a powerful and energy efficient alternative to traditional gas burning luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. \nThis 480 volt crane and rough service LED flood light fixture provides 17,500 of high quality light while drawing only 150 watts. The aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. \n\nThe outdoor rated LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThis light is universal voltage capable and can be operated with 347-480 VAC without modifications. 347V is common in Western Canada, while 480V is common in the United States and Eastern Canada. We also offer other voltage versions of this LED fixture that operates on 120-277V AC 50\/60 Hz or AC\/DC voltages from 11-25 Volts. This waterproof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics. \nThis LED light produces 17,500 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. We also offer a 3000K warm white and 4000K natural white color temperature options (longer lead times may apply for non-standard temperatures). The GAU-LED-160W-RT-480V offers an adjustable mounting system that this fixture to be mounted to any flat surface including walls and ceilings.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 80% lumen output after 60,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Pendant and Swivel Bracket mount included\n8. Low profile - Light weight\n9. 17,500 Lumen output from only 150 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 60,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off – No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38385340514485,"sku":"PL3-GAU-LED-160W-RT-480V","price":2824.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-LED-160W-RT-480V.jpg?v=1629079380"},{"product_id":"pl3-gau-ltl-500w-led-250vdc","title":"Larson 480 Watt High Intensity LED Light - 64,800 Lumens - 250VDC - High Mast \/ Crane Lighting - Outdoors","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please email us at info@purilite.ca to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe GAU-LTL-500W-LED-250VDC High Mast (Crane) LED Flood Light offers intense light output and is ideal for flood lighting, high mast lighting, light towers, as well as industrial and outdoor lighting applications. Producing 64,800 lumens, 80,000 hour service life, 250V DC compatibility, and IP67 waterproof rating, this LED flood light provides operators with a rugged and powerful LED alternative to 1000 watt metal halide lamps that uses little power and can withstand rugged use and abusive conditions.\r\u003cbr\u003eThe GAU-LTL-500W-LED-250VDC LED light from Larson Electronics produces 64,800 lumens of high intensity light while drawing only 480 watts from a 250 volt electrical system. Fourty-Eight CREE high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads. The spot beams are tightly focused and are designed for high elevation mounting to achieve distance, making spot versions ideal for high mast and spots lighting. The flood beams are designed to provide more light over a larger area nearer the fixture, making flood versions ideal for use as dedicated work and area lights.\r\u003cbr\u003eGAU-LTL-500W-LED-250VDC lights are ideal replacements for fragile and hot running 1000 watt metal halide lamps. They offer low power requirements, high durability and a versatile mounting system that makes these LED light emitters a superior lighting solution for demanding applications where power and reliability is critical. The heavy duty design and high power of these LED lights also makes them suitable for a wide array of applications including but not limited to: high mast lighting, light towers, light plant LED retrofits, military, mining, industrial manufacturing, machine visioning, security and law enforcement, commercial structure illumination, sport complexes, billboards, race tracks, and parking lots to name a few.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eThe above image shows the comparison of the traditional (4) 1500 watt metal halides light fixtures mounted to a 30` light tower (left) to (4) GAU-LTL-500W-LED-250VDC 480 watt LED light fixtures mounted to a 30` light tower. The area being illuminated by each tower is 300` in length and 250` in width. Unlike the metal halide light fixtures, there are no hot spots with these LED fixtures. This high output LED light fixture provides an even beam spread over the targeted work area without overcast, glare, light spillage, and wasted illumination. Color rendering is also increased with LED light plants, providing a more realistic night vision that more closely resembles natural daylight illumination.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units feature individual heat sinks per bank of six LEDs to control heat buildup rather than utilizing a single housing to dissipate heat. This allows for more thorough cooling of the LEDs for extended operating periods. This allows the LEDs to be driven at up to 90% capacity without overheating or visible loss of light output. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 80,000 hours.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eAs well as unparalleled heat control, the GAU-LTL-500W-LED-250VDC series of LED lights from Larson Electronics also offer IP67 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40° Celsius to +80° Celsius, are waterproof, and resist ingress of dust, dirt and humidity. The housings are formed from die cast aluminum and the optics are high transmission PMMA with 98% light transmittance. The CREE LEDs help these units achieve resistance to vibrations and are rated at 70% lumen maintenance after 80,0000 hours of use. We recommend these LED lights for use in applications where a lot of vibration, dust, dirt, dampness and abusive working conditions are encountered.\r\u003cbr\u003eMounting:\r\u003cbr\u003eEach unit is equipped with a back mount trunnion style mounting bracket that allows the light to be attached to flat surfaces and adjusted through 160° of vertical movement. To adjust the unit after mounting, the user simply loosens the set screws located on either side of the unit, moves it into the desired position, then re-tightens the screws. The base of the mounting trunnion is equipped with several machined slots which allow users to utilize existing mounting holes and slide the unit for precise mount positioning.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  CREE LED\u003cbr\u003eDimensions:  22.92\"-L x 14.51\"-W x 5.153\"-D\u003cbr\u003eWeight: 32.35 Lbs\u003cbr\u003eTotal Watts: 480\u003cbr\u003eTotal Lumens: 64,800\u003cbr\u003eLuminous Efficiency: 135 lm\/w\u003cbr\u003eBeam Configurations: 10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eLED Color Temperature:  Cool White - 5500-6500K\u003cbr\u003eLED Life Expectancy: 80,000 hours\u003cbr\u003eOptics Efficiency: 98% - PMMA High Transmittance Optics\u003cbr\u003eLed Drive %:  90%\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 127-431V DC\u003cbr\u003eAmp Draw:  5A @ 120V, 2.5A @ 240V, 2.67A @ 277V\u003cbr\u003eWiring:  10` Pigtail w\/ Flying Leads\u003cbr\u003eMounting:  Flat Surface Trunnion Mount U-Bracket\u003cbr\u003eMaterials:  Die Cast Aluminum Housing, PMMA Optics\u003cbr\u003eHousing Color: Powder Coated Black\u003cbr\u003eAmbient Temperature Range: -40°C to +80°C\u003cbr\u003eWaterproof Rating: IP67\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38385367941301,"sku":"PL3-GAU-LTL-500W-LED-250VDC","price":6768.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-LTL-500W-LED-250VDC-1.jpg?v=1611971796"}],"url":"https:\/\/shoppurilite.ca\/es\/collections\/crane-lighting.oembed?page=2","provider":"PuriLite","version":"1.0","type":"link"}