{"title":"Larson Electronics","description":"","products":[{"product_id":"pl3-nvr-poe-v3-5-64ch-84tb","title":"Network Video Recorder - (14) 6TB - 64 Channels - 100\/240VAC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eNVR-POE-V3.5-64CH-84TB Network Video Recorder - 84TB - 64 Channels - 100\/240VAC\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eDevice Type: Network Video Recorder\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eCE Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Capacity: (14) 6 TB SATA Hard Drive\u003c\/td\u003e\n\u003ctd\u003eFCC Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels: 32 \u003c\/td\u003e\n\u003ctd\u003eRoHS Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Compression Format: H.265, H.264, H.264 OVC, MPEG4 \u003c\/td\u003e\n\u003ctd\u003eUL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecording Perfomance: 320 Mbps max, 200 Mbps max when RAID is enabled\u003c\/td\u003e\n\u003ctd\u003eEmbedded Linux Operating System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Viewing Output Capacity: 256 Mbps max, 200 Mbps max when RAID is enabled\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecording Type: Continuous, Schedule, Alarm, Motion Detection, POS, Event\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported IP Camera Resolution: 12 MP\/8 MP\/6 MP\/5 MP\/4 MP\/3 MP\/1080p\/UXGA\/720p\/VGA\/4CIF\/DCIF\/2CIF\/CIF\/QCIF\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Playback Resolution: 12 MP\/8 MP\/6 MP\/5 MP\/4 MP\/3 MP\/1080p\/UXGA\/720p\/VGA\/4CIF\/DCIF\/2CIF\/CIF\/QCIF\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSynchronous Playback: 16-ch @ 1080p, 4-ch @ 4K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output: VGA, HDMI\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI Video Output Formats: HDMI1: 4K (3840 × 2160)\/60Hz, 4K (3840 × 2160)\/30Hz, 2K (2560 × 1440)\/60Hz, 1920 ×1080\/60Hz, 1600 × 1200\/60Hz, 1280 × 1024\/60Hz, 1280 × 720\/60Hz, 1024 × 768\/60HzHDMI2: 1920 × 1080\/60Hz, 1280 × 1024\/60Hz, 1280 × 720\/60Hz, 1024 × 768\/60Hz\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVGA Video Output Formats: VGA1: 2K (2560 × 1440)\/60Hz, 1920 × 1080\/60Hz, 1280 × 1024\/60Hz, 1280 × 720\/60Hz,1024 × 768\/60Hz VGA2: 1920 × 1080\/60Hz, 1280 × 1024\/60Hz, 1280 × 720\/60Hz, 1024 × 768\/60Hz\"\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo Way Audio Input: 1-ch, RCA (Linear, 1kO)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio Output: 2-ch, RCA (Linear, 1kO)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExport Formats: .MP4\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet: 2x Gigabit RJ-45 self-adaptive Ethernet interface\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB: 2x USB 2.0 (front panel), 1x USB 3.0 (rear panel)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHard Drive Capacity: 14x HDDs max., up to 6TB capacity per HDD\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Input\/Alarm Output: 16\/ 8\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating System: Embedded Linux\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity: Password Protection\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols: IPv4, TCP\/IP, UDP, HTTP, UPnP, RTSP\/RTP\/RTCP, SMTP, FTP, DHCP, NTP, DNS, ONVIF, HTTP multipart\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirements: 100 ~ 240 Vac, 6.3 A, 50 ~ 60 Hz\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. Power: 300W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature: 14°F ~ 131°F\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial: Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 19.5\" W x 17.5\" D x 5.7\" H\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHard Drive Interface: SATA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp: 14°F ~ 131°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 19.5€ W × 17.5€ D × 5.7€ H\u003c\/td\u003e\n\u003ctd\u003eToll Free:1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 27.6Lbs\u003c\/td\u003e\n\u003ctd\u003eIntl:1-903-270-1187\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor:Black\u003c\/td\u003e\n\u003ctd\u003eE-mail:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe NVR-POE-V3.5-64CH-84TB from Larson Electronics is a Network Video Recorder that can be used to support remote surveilance operations and video recording activities. The unit comes with 64 channels and 14 hard drives, each with 6TB of storage for a total of 84TB. This unit supports up to 12.0mp recording resolution and H.264 and H.265 video streaming, with HDMI and VGA local video outputs. This 64 channel NVR features 16 alarm inputs, 4 alarm outputs and multiple recording modes and features. This device supports up to 64 IP camera with up to 320 Mbps recording capabilities, ideal for remote surveillance, military and law enforcement operations, and industrial surveying.\nThe NVR-POE-V3.5-64CH-84TB is a 64-channel NVR that can be used with up to 64 compatible IP network cameras. With multiple recording modes (Schedule, Continuous, Motion Detection, POS, Alarm and Event) and 84TB of storage, users could capture hours of footage with ease. Recording features include: event search, evetnt log and email notification. The remote configurable network recorder features a recording performance of 320 Mbps and 256 Mbps remote viewing output capacity. To maximize storage, the unit supports H.265, H.264, and H.264 OVC and MPEG4 video compression.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDVR Access \u003c\/td\u003e\n\u003ctd\u003eApp Access \u003c\/td\u003e\n\u003ctd\u003eWeb Access \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe network recorder is compatible with two-way audio streamingand includes 2 ethernet ports (RJ-45 interface), 2 USB 2.0 portals on the front panel and one USB 3.0 portal on the rear panel. During recording, the unit handles the following data: activity log, email notification, event log, event notification, video analytics and event search. This device offloads videos in MP4 format. Cameras hooked up to the NVR-POE-V3.5-64CH-84TB may use power directly via PoE (802.3af \/ 802.3at) during operation. The NVR runs on 100 - 240VAC of power and is suitable for use in temperatures between 14°F - 131°F. \nThis video recorder accepts a USB mouse input. The unit is fully capable of being controlled via mouse input only. USB mouse ships standard with the vide recorder. USB keyboard sold separately.\nInputs: (1) RCA, 4 Sensor Inputs \nOutputs: (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (front), (1) USB 3.0 (rear) \nApplications: Remote surveilance, outdoor\/indoor recording activities, video capturing, law enforcement operations, military recording, industrial surveying, security during outdoor events, commercial security systems, residential camera support and construction sites. \n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264247877813,"sku":"PL3-NVR-POE-V3.5-64CH-84TB","price":22934.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-NVR-POE-V3.5-64CH-84TB.jpg?v=1628565523"},{"product_id":"pl3-nvr-xx-ktc-mk-usb","title":"Larson Mouse and Keyboard Kit for NVR - USB Input Devices for Larson Electronics NVRs","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eNVR-XX-KTC-MK-USB allows operators to control their NVR. This kit includes (1) USB wired mouse and (1) USB wired keyboard. These input devices are compatible with Larson Electronics NVR series network video recorders.","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264247976117,"sku":"PL3-NVR-XX-KTC-MK-USB","price":164.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_566fd0aa-30bb-4801-b1df-05a8b80068e8.png?v=1610917225"},{"product_id":"pl3-nvr-wm-poe-8ch-2tb-n1","title":"Wall Mounted Network Video Recorder - 2TB - 8 Channels - 100\/240VAC - NEMA 1 Rated","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eNVR-WM-POE-8CH-2TB-N1 Network Video Recorder - 2TB - 8 Channels - 100\/240VAC\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eDevice Type: Network Video Recorder\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eCE Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Capacity: 2 TB SATA Hard Drive\u003c\/td\u003e\n\u003ctd\u003eFCC Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels: 8 \u003c\/td\u003e\n\u003ctd\u003eRoHS Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamera Resolution Support: Up to 8MP \u003c\/td\u003e\n\u003ctd\u003eUL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type: Plug and Play\u003c\/td\u003e\n\u003ctd\u003eEmbedded Linux Operating System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncoming Bit Rate: 40Mbps\u003c\/td\u003e\n\u003ctd\u003eNEMA 1 Rated Tamper-Resistant Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutgoing Bit Rate: 80Mbps\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFPS: 60fps Per Channel\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompression Format: H.265, H.264, H.264 OVC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecording Modes: Continuous, Schedule, Event, Motion Detection, VCA\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExport Format: MP4\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Outputs: (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (Front), (1) USB 3.0 (Rear)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTwo-way Audio Input: 1-ch, RCA\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Over Ethernet: = 120W, Supported Standards- 802.3af and 802.3at\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Input: 4x (Rear Panel), Camera Dependent\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlarm Output: 1x (Rear Panel), Camera Dependent\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocols: IPv4, TCP\/IP, UDP, HTTP, UPnP, RTSP\/RTP\/RTCP, SMTP, FTP, DHCP, NTP, DNS, ONVIF, HTTP Multipart\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 100 ~ 240 VAC\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmpeerage: Max 2A @ 120V, 1A @ 240V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp: 14°F ~ 131°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 15€ W × 11.4€ D × 1.8€ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 6.6 Lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor: Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount: NEMA 1 Rated Wall Mounted Enclosure\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe NVR-WM-POE-8CH-2TB-N1 from Larson Electronics is a Wall-Mounted Network Video Recorder for indoor industrial applications, that can be used to support remote surveilance operations and video recording activities. The unit comes with 8 channels and 2TB of storage. Operators may power recording devices directly from the NVR using a network cable for seamless application. This unit features multiple recording modes (VCA, alarm, continuous, motion detection and event), remote capabilities, several VGA\/4K HDMI output formats and a sturdy aluminum body. The wall mounted NVR is secured in a NEMA 1 rated locking enclosure.\nThe NVR-WM-POE-8CH-2TB-N1 is an 8-channel NVR that can be used with compatible IP network cameras (up to 8MP resolutions). Installation only takes minutes via plug-and-play, which automatically detects, displays and configures system components. With multiple recording modes (Schedule, Continuous, Motion Detection and Event) and 2TB of storage, users could capture hours of footage with ease. The remote configurable network recorder features a bit rate of 40Mbps incoming and 80Mbps outgoing at up to 60fps per channel. To maximize storage, the unit supports H.265, H.264, and H.264 OVC video compression.\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 190px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDVR Access\u003c\/td\u003e\n\u003ctd\u003eApp Access\u003c\/td\u003e\n\u003ctd\u003eWeb Access\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nThe network recorder is compatible with two-way audio streaming (camera dependent) and includes 9 ethernet ports (RJ-45 interface). During recording, the unit handles the following data: activity log, email notification, event log, event notification, video analytics and event search. This device offloads videos in MP4 format. Cameras hooked up to the NVR-WM-POE-8CH-2TB-N1 may use power directly via PoE (802.3af \/ 802.3at) during operation. The NVR runs on 100 - 240VAC of power and is suitable for use in temperatures between 14°F - 131°F.\nThis video recorder accepts USB mouse and keyboard inputs. The unit is fully capable of being controlled via mouse input only and offers an on screen keyboard for password inputs, eliminating the need for a keyboard if not desired. USB mouse ships standard with the vide recorder. USB keyboard sold separately.\nInputs: (1) RCA, 4 Sensor Inputs\nOutputs: (1) RCA, (1) VGA, (1) HDMI, (1) USB 2.0 (front), (1) USB 3.0 (rear)\nMounting: This NVR is secured in a NEMA 1 rated wall-mount enclosure designed for indoor locations. This enclosure has a locking key for security and 6 hubs for routing\/conduit power.\nApplications: Remote surveilance, outdoor\/indoor recording activities, video capturing, law enforcement operations, military recording, industrial surveying, security during outdoor events, commercial security systems, residential camera support and construction sites.\n\n \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264248271029,"sku":"PL3-NVR-WM-POE-8CH-2TB-N1","price":3440.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-NVR-WM-POE-8CH-2TB-N1.jpg?v=1628565585"},{"product_id":"pl3-idcmr-cmr-wip-rps-oz-2mp-im-64g-m","title":"Weatherproof Outdoor Security Camera - Rechargeable - Wireless Video - 8 Hrs Runtime - N3R\/IP66","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eIDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M Outdoor Camera w\/ Wireless Video Output \u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Weatherproof Rechargeable Camera\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eIP66 Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eDimensions: 18\"W x 8\"D x 6\"H\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eNEMA 3R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003eWeatherproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12V DC\u003c\/td\u003e\n\u003ctd\u003eOutdoor Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 5W\u003c\/td\u003e\n\u003ctd\u003e30` Max Distance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImage Sensor:  CMOS\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Resolution: 1920 x 1080 \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Resolutions: 1080p (1920 x 1080), 720p (1280 x 720), VGA (640 x 480), QVGA (320 x 240) \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens: 2.8-4mm Focal Length\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAngle of View: Horizontal: 106°, Diagonal: 118° @ f = 2.8mm; Horizontal: 70°, Diagonal: 78° @ f = 4mm \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Framerate: 30fps (60Hz), 25fps (50Hz), Downward Adjustable\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo Output: Wireless\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Standard: IEEE802.11b \/ g \/ n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Rate: IEEE802.11b - 11Mbps (Max); IEEE802.11g - 54Mbps (Max); IEEE802.11n - 150Mbps (Max)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Bands: 2412 - 2472 MHz\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Access: Supports P2P \u0026amp; DDNS\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWireless Security: Supports WEP, WPA \u0026amp; WPA2\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Power: 18dBm\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Memory: 64 GB Solid State\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory Recording Time: 8 hours of footage in 2MP 1600x1200 at 30 Frames per Second\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Magnetic Mount\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 8.8aH Lithium-ion, Rechargeable \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRuntime: 8 Hours per Charge \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharger: 120-240V Charger \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` 16\/3 SOOW w\/ 3-Pin Disconnect and Cord Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap: 5-15, 6-15, 5-20, 6-20, L5-15, L6-15, L5-20, L6-20, BS1363, Schuko, or Pigtail\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\r\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M from Larson Electronics is a Weatherproof Security Camera for outdoor locations. This IP66-rated device is rechargeable and offers wireless video output and connection to other devices. Capable of producing clear, 1080p HD images, the unit supports magnetic mounting, which does not require tools, screws or additional accessories. 64 GB internal solid state memory allows the weatherproof camera to record up to 8 hours of footage in 2MP 1600x1200 at 30 frames per second. \nCamera Features: The IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M security camera provides operators in outdoor locations with crisp 1080p HD images. Equipped with a 2 MP lens, up to 6x digital zoom is possible with the fixed-focus device. A cutting-edge chipset facilitates image compression and video processing with superior quality. Operating at 5 watts, the monitoring device is rechargeable, with up to 8 hours of runtime per full charge. Video output and connection to other devices is wireless (no cords). An example of such device is our , which operators can use to view images transmitted wirelessly from the weatherproof security camera. 64 GB of internal solid state memory allows this camera to record up to 8 hours of footage in 2MP 1600x1200 at 30 frames per second. Lower resolutions will allow for longer recording times.\nDurability: The IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M is rated NEMA 3R and designed to withstand the rigors of demanding environmental and operating conditions while remaining lightweight and easy to use. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate.\nThe security device is designed to perform under harsh and rugged conditions. This IP66 rated waterproof unit resists the corrosive effects of weather, dust, dirt, and humidity. This outdoor rated camera provides property and product security while protecting operators with its safe and reliable weatherproof design. \nSecurity \u0026amp; Remote Access: The IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M supports several forms of security. The supported forms include WEP Encryption, WPA Encryption and WPA2 Encryption. This outdoor security camera also features remote access capability. It supports both P2P and DDNS remote access.\nWi-Fi: The IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M is Wi-Fi compliant with wireless standards IEEE 802.11 b\/g\/n. On IEEE802.11b, this camera transfers data at a maximum rate of 15Mbps. On IEEE802.11g, the max data transfer rate is 54Mbps. The max data transfer rate on IEEE802.11n is 150Mbps.\nWireless Network: The camera allows operators to create their own 2.4Ghz and 5Ghz wireless network. This feature makes networks for cameras easier to setup in outdoor sites. A QR code on the unit can be scanned for seamless wireless network configuration. The network faciliates the connection of various devices. During use, footage is stored via internal memory.\nBattery\/Charging: This unit is powered by a rechargeable 8.8aH lithium ion battery. At a full charge, the monitoring device provides a runtime of 8 hours. For charging in general locations, operators can use an included, standard 120-240V outlet charger. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n \u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL5-15 Twist Lock Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL6-15 Twist Lock Plug\n15 Amp \/ 250V Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUK BS1363 Straight Blade Plug\n13 Amp \/ 250V Rated \/ Internal Fuse\u003c\/td\u003e\n\u003ctd\u003eIntl Schuko 2-Pin Plug\n16 Amp \/ 250V Rated \/ Grounded \u003c\/td\u003e\n\u003ctd\u003eFlying Leads \/ Pigtail Wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nWiring and Plug: This rechargable camera system is equipped with 10 foot of 16\/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. This line-in cord comes with a 3-pin weatherproof quick disconnect to allow for removing the charging cord during operation. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.\nMounting: The IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M can be mounted on magnetic surfaces via a magnetic mounting system on the heavy-duty camera. This seamless feature allows operators with gloved hands to position the unit instantly, without tools, screws or additional accessories.\nApplications: Outdoor security, observation, surveillance, outdoor monitoring, safety, inspections, surveying and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264248434869,"sku":"PL3-IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M","price":3196.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IDCMR-CMR-WIP-RPS-OZ-2MP-IM.64G-M.jpg?v=1628372749"},{"product_id":"pl3-mmlp-18al-150led-rt","title":"Temporary Manhole Mount Explosion Proof LED Fixture - 21,000 Lumen - Tank Nozzel Mount Lighting","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eMMLP-18AL-150LED-RT Manhole Mount Light \u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: Cree LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass 1 Division 1\u0026amp;2 Groups A,B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: Height: 14\" Length: 16\" Man-Way Support Bracket\u003c\/td\u003e\n\u003ctd\u003eClass 2 Division 1\u0026amp;2  Groups E, F, G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 75lbs\u003c\/td\u003e\n\u003ctd\u003eClass 3 Division 1\u0026amp;2 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: Multi- 100-277 VAC, 50\/60Hz\u003c\/td\u003e\n\u003ctd\u003ecETL cUL Listed For Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 150W\u003c\/td\u003e\n\u003ctd\u003ecETL Certified to UL844 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 21,000 \u003c\/td\u003e\n\u003ctd\u003eUL 595 Wet Location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 140 Lm\/W\u003c\/td\u003e\n\u003ctd\u003ePaint Spray Booth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Lamp Life Expectancy: 60,000 Hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;75 CRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Lux: 8500@ 1 Meter 1250@ 3 Meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 18\" Man Way Entry Support Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eTemp Rating: T5 -50C to +85C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 50` SOOW Cord with an ECP 1523 Explosion Proof Plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\n  \n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe Larson Electronics MMLP-18AL-150LED-RT Temporary Manhole Mount Light Fixture provides operators with a powerful and highly convenient alternative to traditional string or tank lights. Cree LED technology, an innovative 18\" man-way support bracket, and compact design, makes this lamp an excellent lighting solution for operators working within storage tanks, railcars, and other locations where entry is through a 18\" man-hole opening. \nThis unit is a Class 1 Division 1 \u0026amp; 2, Class 2 Division 1 \u0026amp;2, and Class 3 Division 1 \u0026amp; 2 explosion proof adjustable light fixture that provides 21,000 lumens of high quality light while drawing only 150 watts and is IP68 water proof. The non sparking aluminum body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with advanced LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% lumen retention. This 14\" x 16\" LED light fixture is attached to a 18\" supporting plate which allows the light fixture to hang inside a tank or railcar while the supporting plate rests on the lip of a man-way opening. The adjustable light head is connected to a pull cable, which allows operators to change the angle of the light to preset positions of 0°, 45°, and 90° angles. \nThis mounting system provides an extremely versatile lighting option for those working in confined spaces such as rail cars, storage tanks, ship tanks and the like where entry is through an 18\" man-way opening.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n\u003ctable height=\"197\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 38%; height: 131px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 38%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 38%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 83px;\"\u003e\nThis light is multi-voltage capable and can be operated with 100-277 VAC, 50\/60Hz without any need for a special ballast. The light head is easily adjusted to present 0°, 45°, and 90° angles and locked in. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 21,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75, which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The MMLP-18AL-150LED-RT offers excellent convenience and effectiveness with an 18\" manhole mounting support bracket that eliminates the need for special mounting fixtures or cumbersome string light systems. \n \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MV.\n5. Retains 80% lumen output after 50,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. Highly convenient and innovative man-way support bracket provides an excellent alternative to string lights.\n8. Low profile - Light weight\n9. 21,000 Lumen output from only 150 watts\n\n\n \n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off €“ No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n \n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264248631477,"sku":"PL3-MMLP-18AL-150LED-RT","price":9546.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-MMLP-18AL-150LED-RT.jpg?v=1628398084"},{"product_id":"pl3-ledgrw-3b-48x36","title":"Larson 120W COB LED Grow Light - 120V AC - Dimmable - 3 Bands - Optimized for Photosynthesis","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe LEDGRW-3B-48x36 from Larson Electronics is a COB LED Grow Light for indoor growing operations, green houses and confined farming operations. This 120-watt luminary operates on 120VAC and utilizes robust Chip-on-Board (COB) LED technology for superior illumination. Featuring a compact, lightweight design, the unit is designed to promote photosynthesis through an optimized light color spectrum, which offers maximum yields and exceptional plant growth.\r\u003cbr\u003eThe LEDGRW-3B-48x36 COB LED Grow Light is an ideal choice for demanding indoor growing\/farming operations and green houses. The 120-watt fixture is compatible with mainstream voltages at 120VAC. For optimized plant growth, the light features the following RGB color profile: Red 600-699 nm 77.1%; Blue 400-499 nm 22.6%; Green 500-599 nm 0.3%. This LED unit is dimmable at 0-10V. The COB configuration of the luminary allows it to accomodate more diodes per chip with improved lumen-per-watt ratios (compared to other LED configurations), resulting in a concentrated beam during operation. Additionally, the LED chips are potted with high temperature silicone epoxy. The lights operate in a cool and quiet manner, so operators can control the surrounding air temperature with ease.\r\u003cbr\u003eThis COB LED fixture comes with a 10-foot, 120V cord set for seamless wiring. An easy mount V-hangar is available for hanging on ceilings and other compatible surfaces. Due to its lightweight, compact design, operators may re-locate the luminary around the indoor farming facility with minimal effort. This fixture is protected by an all aluminum housing. The recommended growing area size for this unit is 4` long by 3` wide.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\r\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\r\u003cbr\u003eHigh Quality Features\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Low power consumption.\r\u003cbr\u003e1. 50,000+ hour lifespan.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eIndoor farming operations, confined growing facilities, green houses, sustainable growing projects involving small crops, such as vegetables, flowers and other types of plants.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  LED (COB Configuration)\u003cbr\u003eDimensions:  36.25\"L x 6\"W x 17.12\"H\u003cbr\u003eWatts:  120W\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 120VAC\u003cbr\u003eLED Light Color:  White (Red 600-699 nm 77.1%; Blue 400-499 nm 22.6%; Green 500-599 nm 0.3%)\u003cbr\u003eLED Life Expectancy:  50,000 hours\u003cbr\u003eDimmable:  Yes, 0-10V Dimming \u003cbr\u003eAmbient Operating Temp Range: -40°C to +60°C\u003cbr\u003eWiring:  10-foot 120V Cord Set\u003cbr\u003eHousing Material:  Aluminum\u003cbr\u003eHousing Color:  Silver White\u003cbr\u003eMounting:  V-Hangars\u003cbr\u003eWeight:  30 lbs\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264248697013,"sku":"PL3-LEDGRW-3B-48x36","price":1840.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDGRW-3B-48x36-1.jpg?v=1610917244"},{"product_id":"pl3-led-ccb-24l-e39","title":"Larson 120W LED Corn Cob Light - 360 Degree - 400W Metal Halide Replacement - 100-277V AC - E39","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics LED-CCB-24L-E39 is a 120 watt high intensity LED corn cob light with 360 degree illumination. This corn cob light is designed to 400W replace metal halide lamps and is a great alternative that saves energy and lowers utility costs. This LED operates on 100-277V AC.\r\u003cbr\u003eThis LED corn light has a E39 base and 3,000, 4,000, 5,000 and 6,000 color temperature options to produce excellent high intensity white light. LED corn cob lamps have a higher Lumen maintenance than standard metal halide lamps, making them a great retrofit option, and are comprised of individual LED lights in rows. IP64 rated, this unit is waterproof and suitable for indoor or outdoor applications. The LED-CCB-24L-E39 is ideal for high bay lighting, parking lots, street lighting and any place where metal halides are used.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003eBeam Configuration: 360º\u003cbr\u003eLumens: 14,400\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  100-277V AC\u003cbr\u003eWattage:  120\u003cbr\u003eBase:  E39\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264248926389,"sku":"PL3-LED-CCB-24L-E39","price":726.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LED-CCB-24L-E39-1.jpg?v=1610917245"},{"product_id":"pl3-exhl-hl-le1-lv","title":"12W Explosion Proof Handheld LED Light Fixture - 1320 Lumens - Low Voltage - 5\" Polycarbonate Handle","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eEXHL-HL-LE1-LV Explosion Proof LED Light Fixture\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eListed for United States, Canada, Europe, Asia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8\"L x 6\"W x 14\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Div. 1 \u0026amp; 2, Groups B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 12W\u003c\/td\u003e\n\u003ctd\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 12V DC or 24V DC\u003c\/td\u003e\n\u003ctd\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F ,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 1,320\u003c\/td\u003e\n\u003ctd\u003eClass III, Div. 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 110 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA Type 3, 4, 4X, 7 (B,C,D), 9 (E,F,G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: 6000K - White\u003c\/td\u003e\n\u003ctd\u003eATEX Ex II 2 G \/ D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eIECEx db IIC Gb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 40° Flood\u003c\/td\u003e\n\u003ctd\u003eIECEx tb IIC Db IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot Beam: 800`L x 140`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlood Beam: 300`L x 225`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40°C to +60°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Powder Coated - Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: 5\" Polycarbonate Handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n \n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe EXHL-HL-LE1-LV from Larson Electronics is an Explosion Proof LED Light Fixture that is a low voltage, handheld lighting solution for hazardous locations. This 12-watt unit provides 1,320 lumens of white light with a color temperature rating of 6,000K. The explosion proof LED fixture also features a 5\" ergonomic handle for convenience and comfort during operation.\nThe EXHL-HL-LE1-LV produces 1,320 lumens of high-intensity LED light for illumination within hazardous areas and potentially explosive work environments. The low voltage unit is available in two lighting configurations: spot or flood. The spot configuration features a 10° beam that measures 800`L and 140` W. The flood configuration throws a 40° beam that measures 300`L and 225`W. With a high color-temperature rating of 6,000K the handheld LED fixture offers improved detection of dangerous elements, obstructions and abnormal conditions in the surrounding area. \nThis explosion proof LED light from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G). The luminary is designed to withstand the rigors of demanding environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The LEDs offer inherent LED resistance to shocks and vibrations.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nApplications: Hazardous locations, inspections, detailed tasks, confined spaces, oil and gas, agricultural facilities, grain storage, paint spray booths, woodshops, manufacturing plants, outdoor locations and more. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion. resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 70% lumen output after 50,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. 5\" ergonomic handle included.\n8. Low profile - Lightweight.\n9. 1,320 lumen output from 12 watts.\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000+ hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264249122997,"sku":"PL3-EXHL-HL-LE1-LV","price":3732.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EXHL-HL-LE1-LV.jpg?v=1628564593"},{"product_id":"pl3-exhl-trn-le1-xlv-m-100","title":"12W Explosion Proof Handheld LED Light - 120-277VAC Stepped Down 12\/24VDC - Magnetic Trunnion Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eEXHL-TRN-LE1-XLV-M-100 Explosion Proof LED Light Fixture w\/ Adjustable Magnetic Trunnion Mount\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eListed for United States, Canada, Europe, Asia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8\"L x 6\"W x 14\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Div. 1 \u0026amp; 2, Groups B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 12W\u003c\/td\u003e\n\u003ctd\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:120-277V AC Stepped Down to 12V DC or 24V DC\u003c\/td\u003e\n\u003ctd\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F ,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 1,320\u003c\/td\u003e\n\u003ctd\u003eClass III, Div. 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 110 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA Type 3, 4, 4X, 7 (B,C,D), 9 (E,F,G)\u003c\/td\u003e\n \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: 6000K - White\u003c\/td\u003e\n\u003ctd\u003eATEX Ex II 2 G \/ D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eIECEx db IIC Gb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 40° Flood\u003c\/td\u003e\n\u003ctd\u003eIECEx tb IIC Db IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot Beam: 800`L x 140`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlood Beam: 300`L x 225`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40°C to +60°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 100` 12\/3 SOOW Between Transformer \u0026amp; Light - 10` 16\/3 SOOW Between Transformer \u0026amp; Cord Cap\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Trunnion Mount w\/ (1) 200-lb Grip Magnet\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe EXHL-TRN-LE1-XLV-M-100 from Larson Electronics is an Explosion Proof LED Light Fixture that operates on 120-277V AC that is stepped down to 12V DC or 24V DC via an inline transformer and that produces 2750 lumens while drawing only 12 watts. The EXHL-TRN-LE1-XLV-M-100 is Class I, Divisions 1 \u0026amp; 2, Groups B, C, D, Class I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA, Class II, Divisions 1 \u0026amp; 2, Groups E, F ,G and Class III Divisions 1 \u0026amp; 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof LED light fixture also features an adjustable trunnion mount supported by a single 200-lb grip magnet, allowing operators to tilt the light after mounting.\nThe EXHL-TRN-LE1-XLV-M-100 produces 1,320 lumens of high-intensity LED light for illumination within hazardous areas and potentially explosive work environments. This explosion proof LED light fixture operates on voltages ranging from 120-277V AC. This input voltage is then stepped down to either 12V DC or 24V DC to operate the light via an inline transformer. The transformer is encapsulated to make it weatherproof, but it is NOT explosion proof and must remain located outside of the hazardous area. With 100` of 12\/3 SOOW cable between the light and the encapsulated transformer, there is plenty of room to move around the hazardous work area while keeping the transformer in a safe location. The EXHL-TRN-LE1-XLV-M-100 is available in two lighting configurations; spot and flood. The spot configuration features a 10° beam that measures 800`L and 140` W. The flood configuration throws a 40° beam that measures 300`L and 225`W.\nThis explosion proof LED fixture is supported by an adjustable trunnion mount with a 200-lb grip magnet. Operators may securely and quickly mount the light on a magnetic surface for hands-free lighting in hazardous locations and confined spaces. After mounting, operators can adjust the angle of the LED fixture by tilting the light head up and down to reach the desired position. This versatile mounting system is ideal for industrial work that requires gloves, as an opening between the grip magnet and the light (through the opening of the trunnion mount) is available. When a gloved hand is supporting the light through the opening of the trunnion mount, operators may use the LED fixture as a handheld unit for robust control. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL5-15 Twist Lock Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL6-15 Twist Lock Plug\n15 Amp \/ 250V Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUK BS1363 Straight Blade Plug\n13 Amp \/ 250V Rated \/ Internal Fuse \u003c\/td\u003e\n\u003ctd\u003eIntl Schuko 2-Pin Plug\n16 Amp \/ 250V Rated \/ Grounded \u003c\/td\u003e\n\u003ctd\u003eFlying Leads \/ Pigtail Wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\n\nWiring\/Plug: This explosion proof LED light fixture is equipped with 10 feet of 16\/3 chemical and abrasion resistant SOOW cord between the transformer and cord cap. The cord cap is an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.\n*PLEASE NOTE: WHILE THE LIGHT ITSELF IS EXPLOSION PROOF, THE INCLUDED STEP DOWN TRANSFORMER IS NOT AND MUST REMAIN OUTSIDE THE HAZARDOUS AREA*\nDurability: The EXHL-TRN-LE1-XLV-M-100 explosion proof LED light fixture from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) anddesigned to withstand the rigors of demanding of environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are shatterproof borosilicate glass. The LEDs offer inherent LED resistance to shocks and vibrations.\n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n 1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 70% lumen output after 50,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. 5\" ergonomic handle included\n8. Low profile - Light weight\n9. 1,320 Lumen output from 12 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000+ hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264249254069,"sku":"PL3-EXHL-TRN-LE1-XLV-M-100","price":4656.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EXHL-TRN-LE1-XLV-M-100.jpg?v=1628396802"},{"product_id":"pl3-exhl-trn-le1-xlv-c1d1-150","title":"12W Explosion Proof Handheld LED Light - 120-277VAC Stepped Down 12\/24VDC - Trunnion Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eEXHL-TRN-LE1-XLV-C1D1-150 Explosion Proof LED Light Fixture w\/ Adjustable Trunnion Mount\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eListed for United States, Canada, Europe, Asia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 8\"L x 6\"W x 14\"H\u003c\/td\u003e\n\u003ctd\u003eClass I, Div. 1 \u0026amp; 2, Groups B, C, D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 12W\u003c\/td\u003e\n\u003ctd\u003eClass I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:120-277V AC Stepped Down to 12V DC or 24V DC\u003c\/td\u003e\n\u003ctd\u003eClass II, Div. 1 \u0026amp; 2, Groups E, F ,G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 1,350\u003c\/td\u003e\n\u003ctd\u003eClass III, Div. 1 \u0026amp; 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 110 Lm\/W\u003c\/td\u003e\n\u003ctd\u003eNEMA Type 3, 4, 4X, 7 (B,C,D), 9 (E,F,G)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Color: 6000K - White\u003c\/td\u003e\n\u003ctd\u003eATEX Ex II 2 G \/ D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003ctd\u003eIECEx db IIC Gb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 40° Flood\u003c\/td\u003e\n\u003ctd\u003eIECEx tb IIC Db IP66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot Beam: 800`L x 140`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlood Beam: 300`L x 225`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range: -40°C to +60°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 150` 12\/2 SOOW Between Transformer \u0026amp; Light - 10` 16\/3 SOOW Between Transformer \u0026amp; Plug\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap Options: 15-Amp 5-15 (125V), 20-Amp 5-20 (125V), or 20-Amp 6-20 (250V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: Aluminum\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Color: Powder Coated - Grey\u003c\/td\u003e\n\u003ctd\u003eToll Free: 1-800-369-6671\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLens Material: Borosilicate Glass\u003c\/td\u003e\n\u003ctd\u003eIntl: 1-903-270-1187\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Adjustable Trunnion Mount\u003c\/td\u003e\n\u003ctd\u003eE-mail: \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe EXHL-TRN-LE1-XLV-C1D1-150 from Larson Electronics is an Explosion Proof LED Light Fixture that operates on 120-277V AC that is stepped down to 12V DC or 24V DC via an inline transformer and that produces 1350 lumens while drawing only 12 watts. The EXHL-TRN-LE1-XLV-C1D1-150 is Class I, Divisions 1 \u0026amp; 2, Groups B, C, D, Class I, Zones 1 \u0026amp; 2, Groups IIB+H2, IIA, Class II, Divisions 1 \u0026amp; 2, Groups E, F ,G and Class III Divisions 1 \u0026amp; 2 rated for hazardous areas and is listed for use worldwide including the United States, Canada, Europe and Asia. This explosion proof LED light fixture also features an adjustable trunnion mount, allowing operators to tilt the light after mounting.\nThe EXHL-TRN-LE1-XLV-C1D1-150 produces 1,350 lumens of high-intensity LED light for illumination within hazardous areas and potentially explosive work environments. This explosion proof LED light fixture operates on voltages ranging from 120-277V AC. This input voltage is then stepped down to either 12V DC or 24V DC to operate the light via an inline transformer. The transformer is encapsulated to make it weatherproof, but it is NOT explosion proof and must remain located outside of the hazardous area. With 150` of 12\/2 SOOW cable between the light and the encapsulated transformer, there is plenty of room to move around the hazardous work area while keeping the transformer in a safe location. There is 10` of 16\/3 SOOW between transformer and plug. The EXHL-TRN-LE1-XLV-C1D1-150 is available in two lighting configurations; spot and flood. The spot configuration features a 10° beam that measures 800`L and 140` W. The flood configuration throws a 40° beam that measures 300`L and 225`W.\nThis explosion proof LED fixture is supported by an adjustable trunnion mount. Operators may securely and quickly mount the light for hands-free lighting in hazardous locations and confined spaces. After mounting, operators can adjust the angle of the LED fixture by tilting the light head up and down to reach the desired position. This versatile mounting system is ideal for industrial work that requires gloves. When a gloved hand is supporting the light through the opening of the trunnion mount, operators may use the LED fixture as a handheld unit for robust control. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e5-20 Straight Blade Plug \u003c\/td\u003e\n\u003ctd\u003e6-20 Straight Blade Plug \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\nWiring\/Plug: This portable explosion proof LED lighting system is equipped with 150 foot of 12\/2 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include C1D1 rated 5-15 15 amp straight blade plug for 110-125V outlets with ground, C1D1 rated 5-20 20 amp straight blade plug for 110-125V outlets with ground, and C1D1 rated 6-20 20 amp straight blade plug for 220-250V outlets with ground. These explosion proof plugs must be mated with the appropriate explosion proof outlet to retain the C1D1 rating. Please choose cord cap option below.ease choose pigtail option below for flying leads with no plug.\n*PLEASE NOTE: WHILE THE LIGHT ITSELF IS EXPLOSION PROOF, THE INCLUDED STEP DOWN TRANSFORMER IS NOT AND MUST REMAIN OUTSIDE THE HAZARDOUS AREA*\nDurability: The EXHL-TRN-LE1-XLV-C1D1-150 explosion proof LED light fixture from Larson Electronics is rated NEMA Type 3, 4, 4X, 7 (B,C,D) and 9 (E,F,G) anddesigned to withstand the rigors of demanding of environmental and operating conditions while remaining lightweight and easy to use. These units can operate in temperatures of -40° Celsius to 60° Celsius, are waterproof to 3 meter and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are shatterproof borosilicate glass. The LEDs offer inherent LED resistance to shocks and vibrations.\n\n\u003ctable width=\"100%\" border=\"0\" cellpadding=\"2\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eHigh Quality Features\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 212px;\"\u003e\n1. Low power consumption.\n2. Instant on\/off operation.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy.\n4. Superior color rendering compared to HPS, LPS, MH.\n5. Retains 70% lumen output after 50,000 operating hours.\n6. Powder coated aluminum fixture body. \n7. 5\" ergonomic handle included\n8. Low profile - Light weight\n9. 1,320 Lumen output from 12 watts\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000+ hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264249450677,"sku":"PL3-EXHL-TRN-LE1-XLV-C1D1-150","price":6892.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EXHL-TRN-LE1-XLV-C1D1-150.jpg?v=1628396798"},{"product_id":"pl3-artl-bld-rnd-ss-td-5l-lvr","title":"15W Round Dome Top LED Bollard Light - 120\/277V AC - Vandal Resistant - Stainless Steel Construction","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eATRL-BLD-RND-SS-TD-5L-LVR Round Dome Top LED Bollard\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: LED \u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eListed for United States \u0026amp; Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 41 3\/4\"-H x 7\"-Diameter\u003c\/td\u003e\n\u003ctd\u003eApproved for Wet Locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: - \u003c\/td\u003e\n\u003ctd\u003eElectronic Driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-277V AC @ 50\/60 Hz \u003c\/td\u003e\n\u003ctd\u003eRound Curved Dome Top Bollard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 15W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 2,089 (Nominal) 1,384 (Delivered) @ 5000K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 92.26 Lm\/W @ 5000k\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLife Expectancy: 50,000+ hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Color: Cool White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temperature: 3000K, 4000K and 5000K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Angle: Louvers\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: 83 CRI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Range: -40ºC to +40ºC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Material: Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Material: Clear Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMount: Flush Surface Mounting With 8\" Anchor Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe ATRL-BLD-RND-SS-TD-5L-LVR is a round curved dome top LED bollard, suitable to illuminate outdoor walkways, steps, pathways and parking lots, as well as provide physical protection from and visible barriers for vehicles. This IP65 rated round bollard has a standard 5,000K color temperature with a clear polycarbonate lens that delivers 1,384 lumens with a louvered distribution. This stainless steel vandal-resistant housed bollard features an electronic driver, which runs on 120-277V AC @ 50\/60 Hz. This bollard is listed for United States and Canada and approved for wet locations.\nThe ATRL-BLD-RND-SS-TD-5L-LVR produces 15 watts with louvered light distribution, which projects light downward, blocking it from direct view – making this bollard great for landscape and decorative lighting, residential lighting, and for areas that need limited light for conservation purposes. This durable LED bollard operates on 120-277V AC @ 50\/60 Hz with color temperatures of 3,000K, 4,000K and 5,000K. The LED bulbs have a rated life span of 50,000 hours and a CRI of 83. For maximum control the bollard LED array includes an electronic driver, which is located in a sealed internal driver tray for security and easy maintenance.\nThis durable dome top bollard features housing constructed of stainless steel. The bollard has a flush mounting base and includes a mounting kit with 8” anchor bolts, which are drilled into the ground to secure the bollard down and provide vandal-resistance. It is IP65 rated, resistant to dust and protected against the corrosive effects of water jet wash-downs. The ATRL-BLD-RND-SS-TD-5L-LVR can operate in temperatures -40ºC to +40ºC.\nLouvers: Louvers have a similar effects as blind shades, restricting light from view by directing it down towards the ground. Louvered fixtures are ideal for areas that need to minimize the trespass of light, such as beaches, national parks and other wildlife areas. Louvers are also great for aesthetic lighting in residential areas and as decorative landscaping illumination.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nMounting: The ATRL-BLD-RND-SS-TD-5L-LVR includes a mounting kit with 8? vandal-resistant anchor bolts.\nApplications: Walkways, buildings, perimeter lighting, commercial lighting, post lighting, directional lighting, outdoor illumination, upgrading (from CFLs to LEDs), background lighting, general area lighting, residential lighting, landscape lighting and more.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264249712821,"sku":"PL3-ARTL-BLD-RND-SS-TD-5L-LVR","price":2016.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-ARTL-BLD-RND-SS-TD-5L-LVR.jpg?v=1628906564"},{"product_id":"pl3-ind-lq-48-160w-led-x24i","title":"Larson 160W High Bay LED Fixture - General Area Use - Water Cooled - Remote Power Supply","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics IND-LQ-48-160W-LED-X24I High Bay LED Fixture is an integrated LED light fixture that provides 19,200 lumens of illumination. This water-cooled LED light fixture is a direct replacement for existing four lamp T5HO fixtures, providing twice the lamp life, increased durability, and less energy consumption. Equipped with a remote power supply that is protected by a weatherproof enclosure, the water pump, hose and wiring (for the power supply) are sold separately.\r\u003cbr\u003eThe IND-LQ-48-160W-LED-X24I is a low profile linear LED fixture that provides 19,200 lumens of bright light in a 160° wide flood beam spread. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Proactive cooling for the LED lamp is provided by a water pump and hose (both components sold separately). The cooling system is designed to filter and move heat away from the LED fixture. During use, a remote water supply is connected to the unit via inlet\/outlet water hoses.\r\u003cbr\u003eThe IND-LQ-48-160W-LED-X24I is housed in aluminum casing and the LED assembly is protected by a shatter resistant polycarbonate lens. This unit is multi voltage, operating on 110-277 AC 50\/60 Hz with a remote mount 120\/277V AC to 24V DC step down power supply. The remote mount power supply is protected by a weatherproof enclosure, the component must be wired to the system after installation. Wiring for connection between the lamp and power supply is sold separately (we can supply wiring at customer-specific lengths upon request and additional payment).\r\u003cbr\u003eWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and the integrated LED assembly has a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of LED technology give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp life over twice that of standard fluorescent bulbs.\r\u003cbr\u003eThe integrated heat sink allows for efficient heat dissipation, preventing the LEDs from overheating and keeping the overall temperature of the fixture relatively low. Solid state LED technology eliminates the need for a ballast box and lamps, a cumbersome feature of fluorescent fixtures that add weight and require frequent repairs. This low profile light fixture features two adjustable brackets, providing operators with easy installation and allowing for adjustments of the light assembly.\r\u003cbr\u003eThis unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. The IND-LQ-48-160W-LED-X24I light fixture is ideal for indoor-outdoor applications and suitable for use as general area lighting, shop lighting, work space lighting, garage and warehouse lighting, and anywhere a dependable and low maintenance fixture with high output and efficiency is needed.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003eDimensions:  50\"-L x 9\"-W x 6\"-H\u003cbr\u003eWeight:  -\u003cbr\u003eTotal Watts:  160W\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120-277V AC 50\/60 Hz, 24V inline step down\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eBeam Angle:  160°\u003cbr\u003eLuminous Efficiency:  160 lm\/w\u003cbr\u003eTotal Lumens:  19,200\u003cbr\u003eColor Temp:  6000K\u003cbr\u003eAmbient Temp Range:  -30°C to +70°C -30°C to +70°C\u003cbr\u003ePower Efficiency:  \u0026gt;90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Temp Range:  -30°C to +70°C -30°C to +70°C\u003cbr\u003eMaterials:  Aluminum Housing \/ Polycarbonate Lens\u003cbr\u003eMounting:  Surface Mount Brackets\u003cbr\u003ePower Supply:  Remote Mounted (Wiring Sold Separately)\u003cbr\u003eCooling:  Water via Pump, Inlet\/Outlet Hoses (Sold Separately)\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264249942197,"sku":"PL3-IND-LQ-48-160W-LED-X24I","price":11866.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-LQ-48-160W-LED-X24I-1.jpg?v=1610917278"},{"product_id":"pl3-ledwl-par36-dp","title":"Larson 18W PAR36 LED Driving Light - 1800 Lumens - 10-30VDC - IP67 Waterproof - Surface Mount - Deutsch IPD","description":"The LEDWL-PAR36-DP from Larson Electronics is a PAR36 LED Driving Light that is suitable for vehicle lighting systems, off-roading, trucking, forklifts, military applications, emergency fleets and more. This 18-watt luminary consists of six, three-watt LEDs, which is capable of emitting 1,800 lumens in a flood beam configuration with color temperature options of 3000K, 4500K or 6000K. Operators may mount the low voltage unit on any compatible surface and use the light in rainy (IP67 waterproof) or rough environments.\n\u003cbr\u003eThe LEDWL-PAR36-DP is a compact lighting solution for a wide range of vehicles. This PAR36 LED lamp operates on 10-30V DC, including 12V DC and 24V DC. When in use, the luminary emits 1,800 lumens in a flood beam configuration with color temperature options of 3000K, 4500K or 6000K. A total of six, three-watt LEDs can be found inside the unit. Cooling ribs located behind the lamp helps regulate the operating temperature of the luminary. The PAR36 LED Driving Light is constructed of sturdy aluminum with a clear, polycarbonate lens for close range illumination. This luminary is IP67 waterproof and shockproof. Operators may mount the light on compatible surfaces using a surface mount mechanism. This LED fixture comes with a Deutsch IPD \/ LADD DT04-2P connector and a 20` wiring harness with leads.\n\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\n\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\u003cbr\u003eHigh Quality Features\n\u003cbr\u003eSuperior LED Benefits\n\u003cbr\u003e1. Low power consumption.\n\u003cbr\u003e1. 50,000+ hour lifespan.\n\u003cbr\u003e\u003cstrong\u003eHeat Management:\u003c\/strong\u003e\n\u003cbr\u003eHeat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\n\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\n\u003cbr\u003eThe drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 10 to 30V DC without any modifications necessary as a result. (347-480V AC and 120-277V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it.\n\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\n\u003cbr\u003eAs well as unparalleled heat control, the LEDP WRE series of LED lights from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp XM-L LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.\n\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\n\u003cbr\u003eOff-roading, cars, trucks, work area lighting, vehicle lighting systems, outdoor illumination, forklifts, trains, buses, tanks, emergency fleets, law enforcement, communication vehicle, military command vehicle and more.\n\u003cbr\u003eContact info@purilite.ca\n for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  PAR36 LED\u003cbr\u003eDimensions:  4.56\" x 2.59\" x 5.11\" \u003cbr\u003eTotal Watts:  18W\u003cbr\u003eWatts Per Bulb:  3W (6)\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  10-30V DC\u003cbr\u003eCurrent:  1.5A @ 12V \/0.75A @ 24V\u003cbr\u003eLumens:  1,800\u003cbr\u003eBeam Configuration:  Flood\u003cbr\u003eColor Temperature Options:  3000K, 4500K or 6000K\u003cbr\u003eLED Life Expectancy:  50,000+ hours\u003cbr\u003eAmbient Operating Temp Range:  -20°C to +60°C\u003cbr\u003eWiring:  Deutsch IPD \/ LADD DT04-2P connector \u0026amp; 20` wiring harness w\/ leads\u003cbr\u003eHousing Material:  Aluminum \u003cbr\u003eLens Material:  Polycarbonate \u003cbr\u003eMount:  Surface Mount\u003cbr\u003eWeight:  5 lbs\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264250466485,"sku":"PL3-LEDWL-PAR36-DP","price":202.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWL-PAR36-DP-1.jpg?v=1610917285"},{"product_id":"pl3-led18w-par36-1227","title":"Larson 18W PAR36 LED Lamp - 1800 Lumens - 120-277V AC w\/ External Driver","description":"The LED18W-PAR36-1227 from Larson Electronics is a PAR36 LED Lamp designed for PAR36 automotive headlights, can lights, housings and more. This unit is capable of emitting 1,800 lumens with color temperature options of 3000K, 4500K or 6000K. Make selection below when ordering. During operation, an external driver is available for consistent power regulation. A clear, polycarbonate lens reinforces the exterior of the lamp, allowing it to withstand light impacts.\r\u003cbr\u003eThe LED18W-PAR36-1227 is a suitable replacement for PAR36 lighting solutions and systems. This PAR36 LED lamp operates on 120-277V AC and an external driver is available for robust power regulation. When in use, the luminary emits 1,800 lumens in a flood beam configuration with color temperature options of 3000K, 4500K or 6000K. A total of six, three-watt LEDs can be found inside the unit. The PAR36 LED light is equipped with a clear, polycarbonate lens for close range illumination.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eHigh Quality Features\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Low power consumption.\r\u003cbr\u003e1. 50,000+ hour lifespan.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003ePAR36 lighting systems, housings, cans, off-roading, cars, trucks, work area lighting, vehicle lighting systems, outdoor illumination, forklifts, trains, buses, tanks, emergency fleets, law enforcement, communication vehicle, military command vehicle and more.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  PAR36 LED\u003cbr\u003eDimensions:  4.5\" (Nominal Diameter) \u003cbr\u003eTotal Watts:  18W\u003cbr\u003eWatts Per Bulb:  3W (6) \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120-277V AC\u003cbr\u003eCurrent:  1.5A @ 12V \/0.75A @ 24V\u003cbr\u003eLumens:  1,800\u003cbr\u003eBeam Configuration:  Flood\u003cbr\u003eColor Temp Options:  3000K, 4500K or 6000K\u003cbr\u003eLED Life Expectancy:  50,000+ hours\u003cbr\u003eAmbient Operating Temp Range:  -20°C to +60°C\u003cbr\u003eLens Material:  Polycarbonate \u003cbr\u003eWeight:  2 lbs\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264250630325,"sku":"PL3-LED18W-PAR36-1227","price":288.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LED18W-PAR36-1227-1_f511aa55-ff08-4982-8e3a-3cdafb0d02fc.jpg?v=1610917288"},{"product_id":"pl3-spled-blt-18w-led-10c","title":"18W Solar Powered LED Light - 60W Panel, 1530 lms - (2) 20aH Li-ion Batteries","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 59%;\"\u003eSPLED-BLT.18W-LED-10C Solar Powered LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 41%;\"\u003eQuick Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 59%;\"\u003eSolar Panel\/Battery Specs:\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eHigh Output LED Light Source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Dimensions:  -\u003c\/td\u003e\n\u003ctd\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar Panel Watts: 60W\u003c\/td\u003e\n\u003ctd\u003eIP65 Rated LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation: 24\/7, On\/Off, Day\/Night, Motion, or Flying Leads\u003c\/td\u003e\n\u003ctd\u003e50,000+ Hour LED Lamp Life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: (2) 20aH Lithium-ion Batteries\u003c\/td\u003e\n\u003ctd\u003eSurface or Post Mount Solar Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging Time: 5 Hours\u003c\/td\u003e\n\u003ctd\u003e Remote Mount LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRuntime: 12 Hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Surface or Post\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` SOOW Cable w\/ Deutsch 2-pin Disconnect\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Specs:\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology: LED\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Dimensions (w\/o Bracket): 2.3\" Diam\" x 4.75\"-Length\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 18W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage:  DC\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 1,530\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: 50,000 Hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temperature: 5,000K\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI: 85\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: 25° Spot or 60° Flood\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency:  -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: 1.5A @ 12V, 0.75A @ 24V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temperature: -40°C to +85°C\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eTypical Case Temperature: ~20°C Above Ambient Temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Materials: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Finish: Powder Coated\u003c\/td\u003e\n\u003ctd\u003eToll Free:1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Materials: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: Aluminum Trunnion Mount Yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Black, Bronze or White\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe SPLED-BLT.18W-LED-10C from Larson Electronics is a Solar Powered LED Light that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 18-watt solar powered LED light is offered in a spotlight or floodlight beam pattern and several different operating configurations, making it ideal for remote applications. An adjustable trunnion mounting bracket allows the LED lamp to be secured at a separate location from the panel. \nThis solar powered LED light is powered by two 20aH lithium-ion batteries that are recharged by a 60-watt solar panel. Light output comes from an 18-watt LED lamp that produces 1,530 lumens. The industrial LED light is offered in a focused 25° spot beam for distance or 60° flood beam for a diffused wide angle beam. An adjustable trunnion mount in the center of the light housing allows for full adjustability after installation, allowing for precise aiming of this LED light. The lamp's housing is constructed of precision machined aluminum for excellent strength and durability, powder coated for corrosion resistance, and is rated IP65 for ingress protection against direct exposure to water jets from all directions. \nThis LED light provides cool white light output with a color temperature of 5000K and color rendering index of 85 for maximum illumination. The high output, cool running operation, and good color rendering properties of this light makes it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.\nThe solar panel is configured to operate non-stop 24\/7, day\/night with photocell, motion sensor for security purposes, on\/off switch for manual operation, or flying leads for operators to connect to user provided external switches. The day\/night and motion sensor is programmed to activate the solar panel in the evening and to shut it off during the day, activating the LED light when ambient lighting falls below 1 lux. The motion sensor will activate the panel upon detecting movement within range of the panel. \nThe light runs for 12 hours when the battery is fully charged. The lithium-ion battery pack is contained within the solar panel, not the light. Charging time for the battery is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. The included 10` SOOW cord with Deutsch 2-pin disconnect that runs between the solar panel and the light offers operators convenience and flexibility during the mounting process.\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAvailable in a 25° spot beam or 60° flood beam \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n\u003ctable height=\"150\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003ctd\u003eClick Image to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"font-family: Verdana;\"\u003e\n\u003ctd style=\"height: 105px;\"\u003e\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nDurability: The industrial grade LED light is constructed of machined aluminum for high strength and durability with a powder coated finish for increased corrosion resistance. The housing is IP65 rated, providing protection against intrusion into the housing from oils and water directly sprayed on the housing from all directions. This LED light is equipped with an impact resistant polycarbonate lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet conditions are commonly encountered. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eMounting \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound Pole \u003c\/td\u003e\n\u003ctd\u003eSquare Pole \u003c\/td\u003e\n\u003ctd\u003eSurface \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nLarson Electronics has further upgraded the options available with this light. A ten foot extension cord connects the solar panel to the LED light, allowing the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight while the light is mounted in a workspace. The cord between the light and panel ends in Deutsch connectors, allowing an optional longer extension cord to be attached, increasing the distance the light can be installed from the panel. Optional longer extension cords are available at additional cost. Larson Electronics can also configure this light for special requirements including different lights and larger batteries.\nSuggested uses for this light include both commercial and industrial applications as well as consumer based installations. This light is ideal for boat docks, remote locations that rely on batteries for power, exterior outbuilding lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 160px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264250826933,"sku":"PL3-SPLED-BLT.18W-LED-10C","price":3320.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLED-BLT.18W-LED-10C.jpg?v=1629343671"},{"product_id":"pl3-spledxl-2x32e-ms-strb","title":"192W Solar Powered Dual LED Strobe Lights - 265W Panel \u0026 Motion Sensor - (2) 96W Lamps - (2) 12V Batteries - Pole Mount","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSPLEDXL-2X32E-MS-STRB Solar Powered LED Strobe Light\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eFeatures\/Quick Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSolar Panel\/Battery Specs:\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eHigh Output LED Light Sources\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Dimensions: 65.43\"L x 38.98\"W x 1.81\"H\u003c\/td\u003e\n\u003ctd\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Wattage: 265W\u003c\/td\u003e\n\u003ctd\u003e50,000+ Hour LED Lamp Life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Surface or Pole\u003c\/td\u003e\n\u003ctd\u003e(2) LED Strobe Lamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: (2) 250aH Sealed Lead Acid Batteries\u003c\/td\u003e\n\u003ctd\u003eExternal Mount Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging Time: 5 Hours\u003c\/td\u003e\n\u003ctd\u003eSurface or Post Mount Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e Edixeon® 3 Watt LED Emitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Bar Specs:\u003c\/td\u003e\n\u003ctd\u003eIP68 Waterproof LED Strobe Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology: LED\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Qty: (2)\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Dimensions: 18.5\"-L x 3.25\"-H x 3.56\"-D\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 9-42V DC\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eTotal Watts: 192W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSingle-lamp Watts: 96W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Lumens: 11,520 lms\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Lumens: 5,760 lms\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Lux @ Lens: 199,600\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle-lamp Lux @ 1 Meter: 39,400\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficiency: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExpected Lifespan: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temp: 6000K\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Base: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplacement Lamp: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBeam Angle:  10º Spot or 35º Flood\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eSpot Beam:  1100`L x 160`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eFlood Beam:  350`L x 340`W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight Configuration: Flashing Strobe\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003ePower Factor: -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Type: Motion\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders - Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient Operating Temp Range:-40°C to +80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting:  Stud Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: (2) 15` 16\/2 SOOW Cable w\/ Deutsch 2-pin Disconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe Larson Electronics SPLEDXL-2X32E-MS-STRB Solar Powered LED Light is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This rechargeable solar powered LED light is offered in a spotlight or floodlight beam pattern, making it ideal for remote applications. For robust illumination, the unit uses two LED strobing lamps, capable of producing 5,760 lumens each of 6000K rated white light. The SPLEDXL-2X32E-MS-STRB features a motion sensor for automated operation.\nThis solar powered LED light is powered by two 250aH sealed lead acid 12V batteries that are recharged by a 265 watt solar panel. Light output comes from two, 96-watt LED lamps (total of 192 watts) producing 5,760 lumens each for a total lumen output of 11,520 lumens. This solar-powered lighting system features a motion sensor that activates the strobing lights upon sensing movement in the area. \nThe sealed lead acid battery pack is contained within the solar panel, not the light. Charging time for the battery is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. The included 15` 16\/2 SOOW cords with Deutsch 2-pin disconnects that run between the solar panel and the lights offer operators convenience and flexibility during the mounting process.\nLight Features: The LED strobing lights produce 5,760 lumens of bright light each while drawing only 96 watts @ 8 amps from a 12 volt electrical system. With a 6000K color temperature rating, thirty-two Edison Edixeon® Emitters containing CREE EZBright® three-watt LEDs producing 180 lumens each are paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage per light. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixtures, making flood versions ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications.\nThe entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.\nDurability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\nLarson Electronics has further upgraded the options available with this light. A six foot extension cord connects the solar panel to the LED light, allowing the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight while the light is mounted in a workspace. The cord between the light and panel ends in Deutsch connectors, allowing an optional longer extension cord to be attached, increasing the distance the light can be installed from the panel. Optional longer extension cords are available at additional cost. Alternatively, the light can be mounted directly to the panel. Larson Electronics can also configure this light for special requirements including different lights and larger batteries.\nMounting (LED lights): Larson Electronics LEDLB series light bars are equipped standard with aluminum mounting blocks which slide within the aluminum housing to allow users to adjust their positioning to match existing or user drilled mounting holes. Each aluminum mounting block has an integrated rubber bushing to absorb vibrations and shocks. To secure the lights in place users simply slide the mounting bolts through the aluminum mounting block and rubber isolator, through the mounting surface, then secure the bolt with a locking nut on the opposite side of the mounting surface. This mounting system enables mounting to flat or round surfaces and allows for minimal 7 degrees of flexibility of angle placement of the light. We also offer a BC-2 bar clamp mounting system  for even greater mounting versatility.\nApplications: Suggested uses for this light include both commercial and industrial applications as well as consumer based installations. This light is ideal for boat docks, remote locations that rely on batteries for power, exterior outbuilding lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 160px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264251351221,"sku":"PL3-SPLEDXL-2X32E-MS-STRB","price":12604.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-2X32E-MS-STRB.jpg?v=1629343672"},{"product_id":"pl3-gvp-24-2l-led-visred","title":"Larson 2' Vapor Proof LED Light - Visible\/Red Combination - Outdoor Applications","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics GVP-24-2L-LED-VISRED Vapor Proof LED Light offers visible and blackout lamps in a single unit. This two-foot LED fixture produces more output with longer lamp life and is impact\/vibration resistant. Constructed of polycarbonate, the unit is compatible with surface or chain mounting installations. Please note that this unit is vapor proof and not approved for use in hazardous locations.\r\u003cbr\u003eThe GVP-24-2L-LED-VISRED is equipped with two specially designed LED T8-series bulbs which produce a combination of visible light and red light. The lamp with the visible light provides 1,750 lumens of illumination with a correlated color temperature of 5600K cool white, 4500K natural white or 3000K warm white. The blackout lamp offers red light with 600-675nm wavelength. The GVP-24-2L-LED-VISRED, two-foot long, two-lamp LED light fixture is designed for those who wish to replace or upgrade from fluorescent equipped fixtures and offers better light output and longer lamp life with reduced maintenance costs. With no ballast and solid state LED light tubes, this fixture draws less than 0.3 amps while offering durability and versatility that common fluorescent fixtures cannot match.\r\u003cbr\u003eWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included\r\u003cbr\u003eLEDT8-24-V1\r\u003cbr\u003eLED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\r\u003cbr\u003eThe  LED lamps produce more illumination than standard fluorescent bulbs, but help this unit draw only 1\/3 of the current of comparable fluorescent fixtures. The GVP-24-2L-LED-VISRED is multi-voltage and operates on any voltage from 110V to 277V AC 50\/60hz. Integral aluminum heat sink tube backings provide cool operation and long LED life, while a simple latching system seals the lens cover to the housing and provides easy access for re-lamping.\r\u003cbr\u003eHubs:\r\u003cbr\u003eThe GVP-24-2L-LED-VISRED contains a 1\/2\" NPT hub for completing wiring connections.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThis unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. The GVP-24-2L-LED-VISRED light fixture is ideal for indoor-outdoor applications and suitable for use as general area lighting, shop lighting, work space lighting, garage and warehouse lighting, and anywhere a rugged and dependable fixture with high output and efficiency is needed. This light comes with a multi-purpose mounting bracket that can be used for a direct surface mount or reversed and used for chain hanging the unit.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Technology: LED\u003cbr\u003eLamp Quantity: (2)\u003cbr\u003eDimensions:  25\"L x 5-7\/8\"W x 4-3\/16\"H\u003cbr\u003eWeight:  4 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120-277V AC 50\/60 Hz\r\u003cbr\u003e            or 11-25V AC\/DC\u003cbr\u003eTotal Watts:  28W\u003cbr\u003eSingle-lamp Watts:  14W\u003cbr\u003eTotal Lumens:  -\u003cbr\u003eSingle-lamp Lumens: 1,750 lms\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eLuminous Efficiency:  125 Lumens per Watt\u003cbr\u003eRed Light Wavelength:  600-675 nm\u003cbr\u003eColor Temp (Visible Light):  5600K, 4500K or 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  160°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -30° C to +85°C\u003cbr\u003eHousing Material:  Polycarbonate\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  Surface or Chain Standard \u003cbr\u003eWiring:  1\/2\" Hub\u003cbr\u003eCable Range:  .20\" - .39\" (5 - 10 mm)\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264251383989,"sku":"PL3-GVP-24-2L-LED-VISRED","price":826.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/missingProductImage_16108d00-f23c-42c4-91ff-d84278808815.png?v=1610917299"},{"product_id":"pl3-ledlb-4et-uv-365nm-1227","title":"20 Watt Ultraviolet Handheld LED Emitter - 365NM - 4 UV LEDs - Non-Destructive Testing - 120-277VAC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDLB-4E-UV-365NM-1227 LED Light Bar\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eLEDLB LED Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDs: (4) 5 Watt UV LED Emitters\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003e5 Watt LED Emitters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 4\"-L 3\"-H 3.56\"-D\u003c\/td\u003e\n\u003ctd\u003eLEDs Driven At 80% \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 20\u003c\/td\u003e\n\u003ctd\u003e-40 C~ +80C Operating Temp Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nVoltage: 110-277V AC (9-42 VDC w\/o transformer) \n\u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 2.4 Lbs\u003c\/td\u003e\n\u003ctd\u003e70% Retention @65,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 35° Flood \u003c\/td\u003e\n\u003ctd\u003eLED Chip Op Temp -40C to +125C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Stud Bracket\u003c\/td\u003e\n\u003ctd\u003eIP68 Rated Waterproof to 3 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Deutsch IPD \/ LADD DT04-2P connector \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 0.17 (on 120 volts) 1.67 (on 12 volts) \u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Ultraviolet (365NM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\nIntensity (Spot): 50 mW\/cm² @ 12\"\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eIntensity (Flood): 6 mW\/cm² @ 12\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing, Polycarbonate Lens\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Colors: Black or White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 2px;\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 105px;\"\u003e\nCE Certified \n3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe Larson Electronics LEDLB-4E-UV-365NM-1227 LED Light Bar offers high light output and extreme durability combined with versatile mounting and power options. This IP68 rated LED light bar is waterproof to three meters and produces ultraviolet 365nm light while drawing only 20 watts of power @0.17 amp from a 120 volt electrical system. This light is an extremely rugged lighting solution that is ideal for use in commercial marine environments as well as industrial and manufacturing applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining operations. \nThe LEDLB-4E-UV-365NM LED light bar from Larson Electronics produces UV light in the 365 nanometer spectrum with a 50mW intensity. Four five watt LEDs producing 12.5 mW\/cm² each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam with limited spread or light spillage. We also offer optional floodlight versions with 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture, making flood versions ideal for use as work and area lights. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis light includes an inline transformer to allow operation with common 110VAC wall plug current, however, the operator can remove the transformer and run this unit on any voltage from 9 to 42 volts. This unit is set up as a medical infrared led light emitter. Larson Electronics provides 6 feet of SOOW cable so that the LED is able to position itself away from the wall where it receives it`s power.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.\nVoltage Control: These units come standard with a 110-277V AC inline transformer terminated 5-15 wall plug. However, by removing the inline transformer, this ultraviolet LED light can be powered from any DC power source. These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. When the transformer is removed, these LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 19px;\"\u003eLEDLB-4E-UV-365NM-122735° Flood Beam (Opt) \u003c\/td\u003e\n\u003ctd\u003eLEDLB-4E-UV-365NM-122710° Spot Beam (Stnd) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 104px;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nDurability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.\nAdjustable Mounting: The trunnion handle design on the LEDLB-4ET-UV-365NM-1227 allows positioning the unit at various angles while holding the unit at desired locations. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he\/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. \nNote: Most Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors. \nIntensity: \n50 mW\/cm² (50,000 µW\/cm²) in a spot configuration measured at 12\".\n6 mW\/cm² (6,000 µW\/cm²) in a flood configuration measured at 12\".\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 496px;\"\u003e\n \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264251416757,"sku":"PL3-LEDLB-4ET-UV-365NM-1227","price":1682.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDLB-4ET-UV-365NM-1227.jpg?v=1629001222"},{"product_id":"pl3-ind-tri-24-itg-v1-dcm","title":"Larson 20W Industrial Tri-proof LED Fixture - 180-240V AC - Replacement for Fluorescent Lamps","description":"The Larson Electronics IND-TRI-24-ITG-V1-DCM Tri-proof LED Fixture is a powerful alternative or replacement for conventional fluorescent tube-style lamps. Operating on 180-240V AC, the 20-watt unit incorporates cutting-edge SMD 2835 LED chips for superior illumination with a 120-degree beam spread. This IP65-rated LED fixture is constructed of aluminum and polycarbonate.\r\u003cbr\u003eThe IND-TRI-24-ITG-V1-DCM is a suitable replacement for traditional fluorescent tube fixtures. This 20-watt unit operates on 180-240V AC and emits white light via SMD 2835 LED chips. During operation, the LED lamp emits a 120-degree beam spread for robust coverage.\r\u003cbr\u003eThis LED fixture is constructed of aluminum with a polycarbonate lens. Equipped with internal drivers, the unit features IP65 waterproof protection and offers reliable thermal properties. The solid state design of the LED lamp give this fixture superior resistance to damage from vibration and extremes in temperature.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eMounting\/Wiring:\r\u003cbr\u003eThe IND-TRI-24-ITG-V1-DCM is compatible with ceiling or chain mounting configurations. Two accessible hubs at both ends of the unit are available for completing wiring connections. This seamless feature allows operators to connect several LED lamps together using minimal cables or wiring.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eWarehouses, industrial facilities, general work sites, workshops, parking lots, commercial spaces and more.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: LED\u003cbr\u003eDimensions:  24\" x 2.91\" x 3.58\"\u003cbr\u003eWeight:  -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  180-240V AC 50\/60 Hz \u003cbr\u003eWatts:  20W \u003cbr\u003eLumens: -\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  120°\u003cbr\u003ePower Efficiency:  88%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eMaterials:  Aluminum, Polycarbonate, Silicone\u003cbr\u003eMounting:  Ceiling or Hanging \u003cbr\u003eWiring:  (2) Hubs @ Both Ends\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264251908277,"sku":"PL3-IND-TRI-24-ITG-V1-DCM","price":356.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRI-24-ITG-V1-DCM-1.jpg?v=1610917310"},{"product_id":"pl3-gvp-24-itg-led-v2","title":"Larson 20W Tri-proof LED Fixture - 2,200 Lumens - 120-277V AC - Replacement for Fluorescent Lamps - IP65","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe Larson Electronics GVP-24-ITG-LED-V2 Tri-proof LED Fixture is a powerful alternative or replacement for conventional fluorescent tube-style lamps. Operating on universal 120-277V AC, the 20-watt unit incorporates cutting-edge SMD 2835 LED chips, capable of producing 2,200 lumens. This IP65-rated LED fixture is constructed of polycarbonate. Color temperature options include the following: 3,000K; 4,000K or 5,000K.\r\u003cbr\u003eThe GVP-24-ITG-LED-V2 is a suitable replacement for traditional fluorescent tube fixtures. This 20-watt unit operates on universal 120-277V AC and provides 2,200 lumens of white light via SMD 2835 LED chips. During operation, the LED lamp emits a 120-degree beam spread for robust coverage. This LED fixture is offered in 5,000K cool white; 4,000K natural white or 3,000K warm white.\r\u003cbr\u003eThis LED fixture is constructed of polycarbonate with 304 stainless steel clips. Equipped with internal drivers, the unit features IP65 waterproof protection and resistance to dust and corrosion. The solid state design of the LED lamp give this fixture superior resistance to damage from vibration and extremes in temperature.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eMounting\/Wiring:\r\u003cbr\u003eThe GVP-24-ITG-LED-V2 is compatible with ceiling, surface or chain mounting configurations. One accessible hub is available for completing wiring connections to the LED fixture. Quick push connectors ensure secure attachments of cables during installation.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eWarehouses, industrial facilities, general work sites, workshops, parking lots, commercial spaces and more.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: LED\u003cbr\u003eDimensions:  26\" x 4.64\" x 3.14\"\u003cbr\u003eWeight:  22 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120-277V AC 50\/60 Hz \u003cbr\u003eWatts:  20W \u003cbr\u003eLumens: 2,200\u003cbr\u003eLuminous Efficiency: 110 LPW\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eColor Temp:  3,000K; 4,000K or 5,000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  120°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -20° C to +50°C\u003cbr\u003eHousing Material:  Polycarbonate\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  Surface, Ceiling or Chain \u003cbr\u003eWiring:  (1) Hub\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264251941045,"sku":"PL3-GVP-24-ITG-LED-V2","price":190.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GVP-24-ITG-LED-V2-1.jpg?v=1610917313"},{"product_id":"pl3-ledlb-8et-ir-strb-at-1227","title":"24W Medical Infrared LED Strobe Light - 120-277V AC - 8, 3-Watt LEDs - 850NM - Dip Switch Control","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDLB-8ET-IR-STRB-AT-1227 Strobing LED Light Bar\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eLEDLB LED Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDs: (8) Red 3 Watt LEDs\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eEdixeon® 3 Watt LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 6.25\"L x 3\"H x 3.56\"D\u003c\/td\u003e\n\u003ctd\u003eLEDs Driven At 80% \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 24 Watts\u003c\/td\u003e\n\u003ctd\u003e-40°C to +80°C Operating Temp Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120-277V AC Stepped Down to 9-42V DC\u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpot Beam: 150`L x 30`W\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention @ 65,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlood Beam: 90`L x 65`W\u003c\/td\u003e\n\u003ctd\u003eLED Chip Op Temp -40°C to +125°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 3.4 lbs\u003c\/td\u003e\n\u003ctd\u003eEquipped with Adjustable Timer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 35° Flood \u003c\/td\u003e\n\u003ctd\u003eIP68 Rated Waterproof to 3 Meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Trunnion Bracket\u003c\/td\u003e\n\u003ctd\u003eCE Certified \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 20` 16\/3 SOOW Cord Between Light \u0026amp; Transformer, 5` from Transformer to General Area Cord Cap \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko, Pigtail\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 0.2 (on 120 Volts AC)\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLumens: 1440 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Infrared - 850nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing \u0026amp; Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Colors: Black or White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e*3 year warranty replacement on this LED strobe light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.  \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe LEDLB-8ET-IR-STRB-AT-1227 from Larson Electronics is a Strobing Infrared LED Light Bar w\/ Adjustable that offers high light output and extreme durability combined a versatile trunnion mounting system that allows mounting to walls and provides 270 degrees of adjustability. This IP68 rated strobing LED light bar is waterproof to three meters and produces 1,440 lumens while drawing only 24 watts of power @ 0.2 amps from a 120 volt AC electrical system. This LED strobe light produces an infrared light beam in the 850 nanometer (NM) range. The 850Nm versions have a very slight red glow around the LED emitters when veiwed from a certain angle while higher NM units cannot be viewed with the human eye. The LEDLB-8ET-IR-STRB-AT-1227 operates on 120-277V AC that is stepped down via an inline transformer to the 9-42V DC that is required to operate the light itself. This infrared strobe light is controlled by dip switches and features an adjustable timer while providing an extremely rugged lighting solution that is ideal for use in commercial marine environments as well as industrial applications such as machine vision system lighting, heavy equipment illumination, blasting lighting and mining operations.\nThe LEDLB-8ET-IR-STRB-AT-1227 infrared strobe LED light bar from Larson Electronics produces light in the infrared 850Nm standard, which is what is recommended for medical use. Eight Edison Edixeon® 3 watt infrared LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam 375` long by 70` wide with limited spread or light spillage. We offer optional floodlight versions of this light that have 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. These LED light bars are IP67 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability. This light is equipped with a trunnion handle which allows user to hold the unit up to desired areas as well as positioning the light at various angles.\nThe entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.\nVoltage Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars feature a transformer that steps down standard 120-277V AC voltage to the 9-42V DC voltage required by the light. \n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 19px;\"\u003eLEDLB-8ET-IR-STRB-AT-1227 35° Flood Beam \u003c\/td\u003e\n\u003ctd\u003eLEDLB-8ET-IR-STRB-AT-1227 10° Spot Beam \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 104px;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nDurability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the `E` part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance.\nWe recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.\nDip Switch Control: The LEDLB-8ET-IR-STRB-AT-1227 LED strobe light bar with adjustable timer is controlled via dip switches that allow the operator to adjust the frequency of the strobe rate from 0.1 Hz to 102.3 Hz. The switches can be combined to create new frequencies. For example, if the two switches labled 0.1 and 0.2 in the picture shown below are both switched to the \"on\" position, the resulting frequency would be 0.3 Hz. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nAdjustable Mounting: The trunnion mounting design on the LEDLB-8ET allows for post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he\/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. We also offer a BC-2 bar clamp mounting system  for even greater mounting versatility.\nMeasurements: \nTaken at 5 feet from the lens.\n850nm Spot - 1430 uWatts\/cm^2\n850nm Flood - 190 uWatts\/cm^2\n940nm Spot - 940 uWatts\/cm^2\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL5-15 Twist Lock Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL6-15 Twist Lock Plug\n15 Amp \/ 250V Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUK BS1363 Straight Blade Plug\n13 Amp \/ 250V Rated \/ Internal Fuse \u003c\/td\u003e\n\u003ctd\u003eIntl Schuko 2-Pin Plug\n16 Amp \/ 250V Rated \/ Grounded \u003c\/td\u003e\n\u003ctd\u003eFlying Leads \/ Pigtail Wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\nWiring\/Plug: This general use strobing LED light fixture is equipped with 20 feet of 16\/3 chemical and abrasion resistant SOOW cord between the light and the transformer and another 5 feet of cable out from the transformer that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.\nMost Larson Electronics LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD \/ LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high\/low beam, modulating, IR\/Visible combos) will have different Deutsch connectors.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264251973813,"sku":"PL3-LEDLB-8ET-IR-STRB-AT-1227","price":1352.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDLB-8ET-IR-STRB-AT-1227.jpg?v=1629001357"},{"product_id":"pl3-ledlb-8et-ir-110v","title":"24W Medical Infrared LED Light Emitter w\/ Handle - 110VAC - (8) 3-Watt LEDs - 1440 Lumens","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDLB-8ET-IR-110V Infrared LED Light Bar\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eLEDLB LED Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 60%;\"\u003eLEDs: 8 Edixeon® 3 Watt Infrared LEDs\u003c\/td\u003e\n\u003ctd style=\"width: 40%;\"\u003eEdixeon® 3 Watt Infrared LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 6.25\"L x 3\"H x 3.56\"D\u003c\/td\u003e\n\u003ctd\u003eLEDs Driven At 80% \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 24 Watts\u003c\/td\u003e\n\u003ctd\u003e-40°C to +80°C Operating Temp Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 110V AC or 9-42 VDC\u003c\/td\u003e\n\u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 3.4 lbs\u003c\/td\u003e\n\u003ctd\u003e70% Lumen Retention @65,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: 10° Spot or 35° Flood \u003c\/td\u003e\n\u003ctd\u003eLED Chip Op Temp -40°C to +125°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Trunnion Handle\u003c\/td\u003e\n\u003ctd\u003eIP68 Rated Waterproof to 3 Meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 2 (on 12 volts) \u0026amp; 1 (on 24 volts) \u003c\/td\u003e\n\u003ctd\u003eCE Certified \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: Deutsch IPD \/ LADD DT04-2P Connector \u0026amp; 6` 16\/3 SOOW Cord w\/ Wall Plug \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLumens: 1440\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Light Color: Infrared: 750Nm, 850Nm or 940Nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Life Expectancy: 50,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOptics Efficiency: 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing \u0026amp; Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Colors: Black or White\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.  \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n \u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nBuy American Compliant\nThe LEDLB-8ET-IR-110V from Larson Electronics is an Infrared LED Light Bar that offers high light output and extreme durability combined with a versatile trunnion handle in order to hold up to desired areas for therapy. This IP67 rated infrared LED light bar produces an infrared light beam in several different nanometer ranges. The 850Nm versions have a very slight red glow around the LEDs when veiwed from a certain angle while higher NM units cannot be viewed with the human eye. This light comes standard to run off of a 110V AC wall plug in source, however, operator can remove the transformer allowing the unit to run on any voltage from 9 to 42 volts. This unit is set up as a medical infrared led light emitter. Larson Electronics provides 6 feet of SOOW cable so that the LED is able to position itself away from the wall where it receives it`s power.\nThe LEDLB-8ET-IR-110V infrared LED light bar from Larson Electronics is available in 750Nm, 850Nm or 940Nm IR ranges. Please make your selection when ordering below. The 850Nm version is what is recommended for medical use. Eight Edison Edixeon® 3 watt infrared LEDs producing 180 lumens each are arranged in rows and paired with high purity 10 degree optics to produce a tightly focused spot beam 375` long by 70` wide with limited spread or light spillage. We offer optional floodlight versions of this light that have 35 degree optics to produce a wider beam spread and more light over a larger area nearer the fixture. These LED light bars are IP67 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire Larson Electronics LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability. This light is equipped with a trunnion handle which allows user to hold the unit up to desired areas as well as positioning the light at various angles.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon® LEDs. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.\nVoltage Control: These units come standard with a 110V AC plug in. However, these units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. When the transformer is removed, these LEDLB series light bars can operate on current ranging from 9 to 42V DC without any modifications necessary as a result.\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 19px;\"\u003eLEDLB-8ET-IR-110V 35° Flood Beam \u003c\/td\u003e\n\u003ctd\u003eLEDLB-8ET-IR-110V 10° Spot Beam \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 104px;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nDurability: The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the `E` part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.\nAdjustable Mounting: The trunnion handle design on the LEDLB-8ET-IR-110V allows positioning the unit at various angles while holding the unit at desired locations. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he\/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle.\n\n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252006581,"sku":"PL3-LEDLB-8ET-IR-110V","price":944.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDLB-8ET-IR-110V.jpg?v=1629001394"},{"product_id":"pl3-ledt8-28w-v1-dlc-3000k","title":"Larson 28 Watt LED Bulb - 4 Foot T8 Lamp - 2,925.8 Lumens - Replacement or Upgrade for Fluorescent Light","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eBuy American Compliant\r\u003cbr\u003eThe Larson Electronics LEDT8-28W-V1-DLC-3000K 28 watt T-series LED tube lamp is an excellent choice for upgrading existing T8 fluorescent lamp fixtures to LEDs as well as a direct replacement for our own LED light fixtures. This LED lamp is LEL listed, providing 104.49 lumens per watt for a total of 2925.8 lumens per lamp. These T8 LED replacement lamps offer 50,000 hour lamp life, over twice that of T8 or T5HO fluorescent lamps, while offering impact and vibration resistance far exceeding traditional light sources.\r\u003cbr\u003eThis 28 Watt T-series LED Bulb works with any T8 fluorescent light fixtures, can be configured for any T series fluorescent lamp fixture with G13 bi-pin tombstones or sockets, and requires no ballast for operation. To increase safety during installation and routine maintenance, these lamps are wired for single sided power with internal integrated LED driver housed within the tube. Internally, you simply bring the black wire to one pin and the white wire to the other. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe environments as there is no glass. The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. These LED light tubes can also be plugged directly into fluorescent light fixtures with magnetic ballasts, which makes them an ideal retrofit for older T12 fluorescent lights with magnetic ballasts.\r\u003cbr\u003eIn fluorescent light fixtures with electronic ballasts, the operator needs to bypass the ballast and wire the power directly to one end of the LED tube (black wire to one pin and white wire to the other). Thus, this is an ideal upgrade for 4 foot fixtures with failed ballasts. These LED fluorescent style bulbs are universal voltage and run directly off any voltage ranging from 100 volts to 277 volts AC 50\/60 Hz. The internal LED driver is a \"smart\" driver, sensing the incoming voltage and adjusting accordingly to provide the current required by the lamp. This allows operators to simply wire the fixture to voltage within the 120-277V range, no modifications required. This includes commonly found voltages such as 120V 60Hz, 220V 50Hz, 240V 60Hz, and 277V 60Hz. We also offer a 12\/24V AC\/DC version for low voltage applications for AC or DC power. Low voltage fixtures require no modifications between 12V and 24V power sources, nor between alternating and direct current supply.\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\r\u003cbr\u003eThe LEDT8-28W-V1-DLC-3000K features specially designed rotating end caps. Fluorescent lamps provide a full 360° beam coverage around the lamp. Since most fluorescent fixtures require directional lighting, reflectors have to be used to bounce the light back towards the intended target area for illumination. LED lamps are directional, which eliminates the need for back mounted reflectors and reduces wasted and lost light. However, the tombstones for existing fixtures may position the face of the LED lamp in a direction facing away from the target illumination area. With the rotating pins, operators can reposition the lamp so the face of the LED tube is positioned properly within existing fixtures. This also allows for fine tune adjustment of each individual lamp within fixtures containing multiple lamps.\r\u003cbr\u003eThese are the second generation of our 28 watt LED tubes. Efficiency for this LED lamp is 104.49 lumens per watt, for a total of 2,925.8 lumens per bulb. We offer a choice of clear, frosted, or heavy frosted lenses. The LEDT8 series of LED lamps are designed for direct replacement of 4ft fluorescent fixtures with G13 bases for replacing four foot T8, T8 high output, T12, T12 high output, and T12 very high output florescent lamps. Additionally, these lamps can be used in fixtures that currently use a G5 to G13 adapter socket using T5 lamps. Please note, this tube is 47\" in length and will not fit properly in fixtures designed to accept 45\" T5 lamps without adapters.\r\u003cbr\u003eThese LED fluorescent tube replacements can be used as upgrades or replacements to our own explosion proof fluorescent lights, explosion proof paint spray booth lights as well as any other T series light fixture the operator already has in house. We have specially designed these for our explosion proof light fixtures, however, they can be used as replacements in standard fluorescent light fixtures. In our facilities, we replaced worn or spent fluorescent bulbs with these LED bulbs by removing the ballasts and bringing the white wire to one end and the black wire to the other end of the LED tube.\r\u003cbr\u003eLED Lamp Benefits\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eListing: United States \u0026amp; Canada\u003cbr\u003eLamp Type:  LED T8-Style Tube\u003cbr\u003eBase: G13 Bi-Pin\u003cbr\u003eDimensions:  47\"-L x 1.03\"-OD\u003cbr\u003eWeight:  0.77 lbs (350 grams)\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 100-277 Volts AC, 50\/60Hz or 11-25 Volts AC\/DC\u003cbr\u003eWatts: 28 watts \u003cbr\u003eTotal Lumens:  2,925.8 \u003cbr\u003eLuminous Efficiency:  104.49 lm\/w\u003cbr\u003eLamp Life Expectancy:  50,000+ Hours\u003cbr\u003eColor Temperature:  3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam angle:  150°\u003cbr\u003eLighting Configuration:  Flood Pattern\u003cbr\u003eLens:  Clear, Frosted, Heavy Frosted\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Temperature Rating: -40°C to +65°C\u003cbr\u003eMaterials:  Aluminum housing, polycarbonate lens\u003cbr\u003eIngress Protection:  IP20\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252039349,"sku":"PL3-LEDT8-28W-V1-DLC-3000K","price":264.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDT8-28W-V1-DLC-3000K-1.jpg?v=1610917326"},{"product_id":"pl3-spledxl-24v-250ah-8-2-150c","title":"265W Pole Mounted Solar Panel - 3 Day Run Time @ 20W - 150' 8\/2 SOOW - 250AH @ 24V Batteries","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSPLEDXL-24V-250AH-8.2-150C Pole Mount Solar Panel\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003ePanel Dimensions: 65.43\"L x 38.98\"W x 1.81\"H\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Wattage: 265W\u003c\/td\u003e\n\u003ctd\u003ePole Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Pole\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: 250AH @ 24V\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders-Special Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRun Time: 2-3 Days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 150` 8\/2 SOOW cord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: NEMA 3R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics SPLEDXL-24V-250AH-8.2-150C Pole Mount Solar Panel is an ideal power solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 265W solar panel includes 150 feet of 8\/2 SOOW cord for power output to connect to any 24V DC device, and will power up to a 20W device for 24\/7 operation. Higher wattage devices may be run for shorter time periods.\nThis solar panel is powered by 250AH 24V batteries that are recharged by the 265 watt solar panel during sunlight and operates on a 24 voltage system. The solar panel will operate 2-3 full days without sunlight on a single charge. The sealed battery pack is contained within the solar panel in a NEMA 3R enclosure. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. Mounting options include the ability to attach the fixture to flat surfaces such as walls or round\/square pole mounting such as on flagpoles or structure supports. The included 150` 8\/2 SOOW cord that runs between the solar panel and the light offers operators convenience and flexibility during the mounting process.\nSuggested uses for this solar panel include both commercial and industrial applications as well as consumer based installations. This panel is ideal for boat docks, remote locations that rely on batteries for power, hunting cabins, parking areas, and anywhere a standalone power solution is needed.\n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252072117,"sku":"PL3-SPLEDXL-24V-250AH-8.2-150C","price":10854.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-24V-250AH-8.2-150C.jpg?v=1629343669"},{"product_id":"pl3-gvp-24-2l-lv-sol-dns-m1","title":"Larson 28W Solar Powered LED Light - 12V DC - Day\/Night Sensor, Lithium-ion Battery - On\/Off Switch - Vaporproof","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in Texas\r\u003cbr\u003eThe GVP-24-2L-LV-SOL-DNS-M1 from Larson Electronics is a Vapor Proof Solar Power LED Light Fixture that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This powerful yet compact vapor proof LED light delivers crisp, clean light while reducing operating costs. Charged by a 30 watt solar panel, one 12V AC 20aH lithium-ion battery provides constant, reliable power to the 2 tube, 28-watt fixture. This vapor proof LED solar power light is also equipped with a day\/night sensor that turns the light in low-light conditions.\r\u003cbr\u003eLight \u003cstrong\u003eFeatures:\u003c\/strong\u003e\r\u003cbr\u003eThis 2 foot long, 2 LED tube, vapor proof solar LED light fixture is ideal for use in remote locations requiring powerful yet compact LED lighting. The GVP-24-2L-LV-SOL-DNS-M1 features our second generation LED T-series 14 watt T17 style lamps which produce 15% more illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T-6 temperature rating. The solid state design of the LED lamps gives this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs.\r\u003cbr\u003eMounting\r\u003cbr\u003eRound Pole\r\u003cbr\u003eSquare Pole\r\u003cbr\u003eSurface\r\u003cbr\u003eThe day\/night  sensor is programmed to activate the solar panel in the evening and to shut it off during the day.   The GVP-24-2L-LV-SOL-DNS-M1 provides 10 hours of continuous runtime when the battery is fully charged. Charging time for the battery bank is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. Indirect sunlight and low ambient light levels, such as on cloudy days, will extend the charge time.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003ePower\/Wiring:\r\u003cbr\u003eThis GVP-24-2L-LV-SOL-DNS-M1 is powered by one 12V AC 20aH lithium-ion battery that is recharged by a 30 watt solar panel. This rechargeable battery provide a continuous supply of steady, reliable power. The battery pack is contained within the solar panel, not the light. This fixture ships with 20 feet of 12\/2 SOOW cord that connects the panel to the switch and 15 feet of 12\/2 SOOW cord that connects the switch to the light. Custom lengths are available upon request. Please contact us for special requirements.\r\u003cbr\u003eAdditional Mounting Options:\r\u003cbr\u003eUnless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).\r\u003cbr\u003eStandard Bracket Mounts:\r\u003cbr\u003eEach bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: Solar LED\u003cbr\u003eLamp Dimensions: 8.5\"H x 27.5\"L x 11.25\"W\u003cbr\u003eSolar Panel Dimensions: 11.38\" L x 15.75\" D\u003cbr\u003eWeight:  32 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003cbr\u003eBattery: (1) 20aH Lithium-ion \u003cbr\u003eRuntime: 10 Hours\u003cbr\u003eCharging Time 5 Hours\u003cbr\u003eTotal Watts: 28W\u003cbr\u003eLumens: 3,500\u003cbr\u003eLuminous Efficacy: 125 Lm\/W\u003cbr\u003eLED Lamp Life Expectancy: 50,000+ Hours\u003cbr\u003eColor Temp: 5300K\u003cbr\u003eColor Rendering Index: \u0026gt;80\u003cbr\u003eBeam Angle: 150°\u003cbr\u003eLighting Configuration: Wide Flood Beam\u003cbr\u003ePower Efficiency: \u0026gt;90%\u003cbr\u003ePower Factor: \u0026gt;0.85\u003cbr\u003eSensor Type: Day\/Night\u003cbr\u003eSwitch: Inline On\/Off\u003cbr\u003eAmperage: 2.3A@12V DC\u003cbr\u003eOperating Temp Range: -40°C to +65°C\u003cbr\u003eOperating Temp Rating: T6\u003cbr\u003eHousing Material: Cast Aluminum\u003cbr\u003eLens Material: Tempered Glass\u003cbr\u003eMounting: Bracket Standard - Pendant Optional\u003cbr\u003eWiring: 20` 12\/2 SOOW Cord - Panel to Switch, 15' 12\/2 SOOW Cord - Switch to Light \u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252104885,"sku":"PL3-GVP-24-2L-LV-SOL-DNS-M1","price":3916.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GVP-24-2L-LV-SOL-DNS-M1-1.jpg?v=1610917332"},{"product_id":"pl3-sbc-4-3xusb-r1","title":"28W Portable Solar Charger - (3) USB Ports - 5V\/3.4A Max per Port - Digital Ammeter - Outdoor\/Foldable","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSBC-4-3XUSB-R1 Portable Solar Panels\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUnit Type: Outdoor Foldable Solar Charger\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eWaterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 11.1\" x 6.3\" x 1.34\" (Folded); 33.1\" x 11.1\" x 0.2\" (Open)\u003c\/td\u003e\n\u003ctd\u003eDigital Ammeter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 1.29 lbs\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Qty: (4) 7W Panels\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 28W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput: 5V\/3.4A Max (Total: 17W Max)\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders-Special Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConversion Rate: 21.5 - 23.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount: Portable via (4) Buckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 21px;\"\u003eConnection: (3) USB Ports\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable: (1) 24\" Micro USB Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics SBC-4-3XUSB-R1 Portable Solar Charger allows individuals to charge devices in remote locations. Equipped with four, 7-watt solar panels, this waterproof unit features three USB ports and a digital ammeter. Four buckles ensure secure mounting on a wide range of openings and equipment. \nThe SBC-4-3XUSB-R1 charges compact electronics using four foldable 7-watt solar panels. This unit offers 5V\/3.4 maximum output and a solar conversion rate of 21.5-23.5%. Operators can power or charge devices via three USB ports (a 24\" micro USB cable is included). The waterproof solar charger is designed for outdoor, on-the-go applications. Mounting on backpacks, tents, poles, straps and other equipment is facilitated by four buckles. \n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252137653,"sku":"PL3-SBC-4-3XUSB-R1","price":354.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SBC-4-3XUSB-R1.jpg?v=1629343679"},{"product_id":"pl3-gvp-24-2l-lv-m-sol-80c-ils-mod1","title":"Larson 28W Solar Powered Vaporproof LED Light - 12V - 10Hr Runtime - Magnetic Mount","description":"Made in Texas\r\u003cbr\u003eThe GVP-24-2L-LV-M-SOL-80C-ILS-MOD1 from Larson Electronics is a Vapor Proof Solar Power LED light fixture that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This powerful yet compact vapor proof LED light delivers crisp, clean light while reducing operating costs. Charged by the 30 watt solar panel, two 12V AC 8aH sealed lead acid batteries provide constant, reliable power to the magnetic-mount LED fixture.\r\u003cbr\u003eLight \u003cstrong\u003eFeatures:\u003c\/strong\u003e\r\u003cbr\u003eThis 2 foot long, 2 LED tube, vapor proof solar LED light fixture is ideal for use in remote locations requiring powerful yet compact LED lighting. The GVP-24-2L-LV-M-SOL-80C-ILS-MOD1 features our second generation LED T-series 14 watt T17 style lamps which produce 15% more illumination at 8 feet, compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels.\r\u003cbr\u003eWe have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T6 temperature rating. The solid state design of the LED lamps gives this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs.\r\u003cbr\u003eMounting\r\u003cbr\u003eRound Pole\r\u003cbr\u003eSquare Pole\r\u003cbr\u003eSurface\r\u003cbr\u003eAn in-line switch is available between the LED lamp and enclosure, which provides standard controls for the light. The on\/off switch will activate and shut off the solar panel according to the operator's preference.\r\u003cbr\u003eThe GVP-24-2L-LV-M-SOL-80C-ILS-MOD1 provides 10 hours of continuous runtime when the battery is fully charged. Charging time for the battery bank is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. Indirect sunlight and low ambient light levels, such as on cloudy days, will extend the charge time.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. Solid state LED lighting is also safer for the environment as LEDs are 100% recyclable. And recycling simultaneously reduces operating costs by eliminating the need for the expensive special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003ePower\/Wiring:\r\u003cbr\u003eThis GVP-24-2L-LV-M-SOL-80C-ILS-MOD1 is powered by two, 12V AC 8aH sealed lead acid batteries that are recharged by a 30 watt solar panel. These rechargeable batteries provide a continuous supply of steady, reliable power. The lead acid battery pack is contained within the solar panel, not the light. This fixture ships with 80 feet of 16\/3 SOOW cord. A 40' cord connects the enclosure to the in-line switch; and 40' of cord connects the switch to the LED lamp (total 80'). Custom lengths are available upon request. Please contact us for special requirements.\r\u003cbr\u003eMount:\r\u003cbr\u003eThe vaporproof LED light comes with two, 200 lbs heavy-duty magnets at the back of the fixture, which facilitates magnetic mounting on compatible surfaces. With this feature, operators can secure and move the LED light seamlessly without tools.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003ePaint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, etc.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: Solar LED\u003cbr\u003eLamp Dimensions: 8.5\"H x 27.5\"L x 11.25\"W\u003cbr\u003eSolar Panel Dimensions: 11.38\" L x 15.75\" D\u003cbr\u003eWeight:  -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12V DC\u003cbr\u003eBattery: (2) 8aH Sealed Lead Acid Batteries\u003cbr\u003eRuntime: 10 Hours\u003cbr\u003eCharging Time 5 Hours\u003cbr\u003eTotal Watts: 28W\u003cbr\u003eLumens: 3,500\u003cbr\u003eLuminous Efficacy: 125 Lm\/W\u003cbr\u003eLED Lamp Life Expectancy: 50,000+ Hours\u003cbr\u003eColor Temp: 5300K\u003cbr\u003eColor Rendering Index: \u0026gt;80\u003cbr\u003eBeam Angle: 150°\u003cbr\u003eLighting Configuration: Wide Flood Beam\u003cbr\u003ePower Efficiency: \u0026gt;90%\u003cbr\u003ePower Factor: \u0026gt;0.85\u003cbr\u003e\u003cstrong\u003eControls:\u003c\/strong\u003e In-line On\/off Switch\u003cbr\u003eAmperage: 2.3A @ 12V DC\u003cbr\u003eOperating Temp Range: -40°C to +65°C\u003cbr\u003eOperating Temp Rating: T6\u003cbr\u003eHousing Material: Cast Aluminum\u003cbr\u003eLens Material: Tempered Glass\u003cbr\u003eLight Mounting: Magnetic Mount via (2) 200 lbs Magnets\u003cbr\u003ePanel Mounting:  Round\/Square Pole, Surface\u003cbr\u003eWiring: 80` 16\/3 SOOW Cord (40' Cord from Enclosure to Switch; 40' Cord from Switch to LED Light)\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252170421,"sku":"PL3-GVP-24-2L-LV-M-SOL-80C-ILS-MOD1","price":4970.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GVP-24-2L-LV-M-SOL-80C-ILS-MOD1-1.jpg?v=1610917336"},{"product_id":"pl3-gvp-24-2l-led-d-v2","title":"Larson 28W Vapor Proof Dimmable LED Fixture - 0-10V Dimmable - 3500 Lumens - 120-277V AC or 11-25V AC","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eMade in the USA\r\u003cbr\u003eThe GVP-24-2L-LED-D-V2-D-V2 from Larson Electronics is a 0-10V dimmable LED fixture similar to our popular explosion proof LED fixtures and provides an LED alternative to fluorescent fixtures that provides longer lamp life and higher performance. These two foot LED fixtures produce more output with longer lamp life and are vapor proof and impact \/ vibration resistant. Please note that this unit is vapor proof and not approved for use in hazardous locations.\r\u003cbr\u003eThe GVP-24-2L-LED-D-V2 is equipped with two specially designed LED T8-series bulbs which produce 1,750 lumens each and have a correlated color temperature of 5,600K, 4,500K, or 3,000K. The GVP-24-2L-LED-D-V2, two foot long, two lamp 0-10V dimmable LED light fixture is designed for those who wish to replace or upgrade from fluorescent equipped fixtures and offers better light output and longer lamp life with reduced maintenance costs. With no ballast and solid state LED light tubes, this 0-10V dimmable fixture draws less than 0.3 amps while offering durability and versatility that common fluorescent fixtures cannot match.\r\u003cbr\u003eWe have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and overall complexity of installation. There is no ballast in this unit and the included\r\u003cbr\u003eLEDT8-24-V1\r\u003cbr\u003eLED lamps have a 50,000+ hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drivers, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white, 4500K natural white, and 3000K warm white. Our standard unit ships with 5600K unless different color temperature is specified.\r\u003cbr\u003eUnlike the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Instead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the \"tube\" constructed from extruded aluminum, with a polycarbonate lens protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting.\r\u003cbr\u003eThe 14 watt dimmable LED lamps produce more illumination than standard fluorescent bulbs, but help this unit draw only 1\/3 of the current of comparable fluorescent fixtures. The GVP-24-2L-LED-D-V2 is multi-voltage and operates on any voltage from 110V to 277V AC 50\/60hz. This LED fixture is 0-10V dimmable. Integral aluminum heat sink tube backings provide cool operation and long LED life, while a simple latching system seals the lens cover to the housing and provides easy access for re-lamping.\r\u003cbr\u003eThis LED light fixture features 0-10V dimming capabilities. This gives operators the ability to manually adjust the brightness of the LED lamp quickly and easily. The 0-10V dimming allows for adjustments to fit the brightness needs of any lighting situation. A 0-10V dimmable light works through the use of a DC control signal that ranges between zero and ten volts. The basic idea is that at 10 volts of input the light is at its brightest level with 0 volts being the lowest possible dimness setting. The smooth, continuous and flicker-free dimming of a 0-10V dimmable LED light is ideal for a wide range of different lighting applications.\r\u003cbr\u003eThis unit is designed to be either surface mounted or hung from cable or chain and includes built in mounts. The GVP-24-2L-LED-D-V2 light fixture is ideal for indoor-outdoor applications and suitable for use as general area lighting, shop lighting, work space lighting, garage and warehouse lighting, and anywhere a rugged and dependable fixture with high output and efficiency is needed. This light comes with a multi-purpose mounting bracket that can be used for a direct surface mount or reversed and used for chain hanging the unit.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. 50,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: 0-10V Dimmable LED\u003cbr\u003eListing: United States - Canada\u003cbr\u003eDimensions:  25\"L x 5-7\/8\"W x 4-3\/16\"H\u003cbr\u003eWeight:  4 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  Universal 120-277VAC 50\/60 Hz or 11-25V AC\/DC\u003cbr\u003eTotal Watts:  28 watts \u003cbr\u003eTotal Lumens: 3,500\u003cbr\u003eLED Lamp Life Expectancy:  50,000+ Hours\u003cbr\u003eLuminous Efficiency:  125 Lumens per Watt\u003cbr\u003eColor Temp:  5600K, 4500K, 3000K\u003cbr\u003eColor Rendering Index:  \u0026gt;80\u003cbr\u003eBeam Angle:  160°\u003cbr\u003ePower Efficiency:  90%\u003cbr\u003ePower Factor:  \u0026gt;0.95\u003cbr\u003eAmbient Operating Temp Range: -30°C to +85°C\u003cbr\u003eHousing Material:  Polycarbonate\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  Surface or Chain Standard \u003cbr\u003eWiring:  1\/2\" Hub\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252203189,"sku":"PL3-GVP-24-2L-LED-D-V2","price":914.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GVP-24-2L-LED-D-V2-1.jpg?v=1610917338"},{"product_id":"pl3-ledsm-3x60-r","title":"Larson 3 LED Spreader Light in billet aluminum housing (tube frame)","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eBuy American Compliant\r\u003cbr\u003eThe LEDSM-3X60-R LED spreader light is designed as an extremely efficient and versatile lighting solution for boat walkways, cabin areas, stairs, vehicles and and anywhere a compact and efficient lighting solution is needed. This LED strip light is designed for mounting on tube frames between 1 3\/4” to 2” in size and produces 675 lumens of bright pure light while using only .2 amps of power.\r\u003cbr\u003eThis high intensity LED spreader light consists of three LED potted and housed within a billet aluminum fixture that features a very small profile for easy and unobtrusive mounting in tight and space limited areas. These lights feature a thin profile that makes them ideal for replacing older bulky incandescent or fluorescent fixtures. This LED spreader light is designed to mount to tube frames such as those found on boat railings and canopies, and each LED is independently wired to allow each LED to be operated on its own switch or circuit if desired.\r\u003cbr\u003eMeasuring only 5.25\" long and 2” wide, these compact units are ideal for installation along railings, under cabinets, along stairs and wherever a powerful and compact light is needed. The 675 lumen output of these lights combined with low .2amp power consumption makes these units ideal for replacing older and less efficient fluorescent lights. These can be operated together or independently by either wiring all the LEDs into the same circuit or each one to its own circuit. Each LED has ane ground wire and one hot wire the fixture is predrilled with a through hole on each end for mounting. This LED light is designed to operate with 12 volt DC current and is equipped with a three foot pigtail for easy wiring installation.\r\u003cbr\u003eThis LED spreader light runs cool to the touch, will illuminate an area approximately 10` x 10`, and has an operational life of 50,000 hours. The housing is available in either black anodize or clear anodize. Please choose your preference from the drop down menu below.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003eDimensions:  5.25\" Length   2\" Width .875\" Depth\u003cbr\u003eAmps:  .2 on 12 volts\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  12 VDC Only \u003cbr\u003eMounting:  Tube Frame Mount\u003cbr\u003eWiring:  2 Wires Each LED, Hot and Ground\u003cbr\u003eLumens: 675\u003cbr\u003eLED Life Expectancy: 50,000 hours\u003cbr\u003eMaterials:  Billet Aluminum\u003cbr\u003eBeam Size:  10`L x 10`W\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252235957,"sku":"PL3-LEDSM-3X60-R","price":350.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDSM-3X60-R.jpg?v=1610934525"},{"product_id":"pl3-gau-emg-2x2w-8h","title":"2W Emergency Dual LED Bugeye System - 240 Lumens - 3.6V Battery Backup for 8 Hours - Damp Locations","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eGAU-EMG-2X2W-8H Emergency LED Bugeye System \u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eRatings\/Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eLamp Type: LED\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eDual, Adjustable LED Bugeyes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: 12-3\/8\"H x 11-3\/8\"W x 2-1\/2\"D\u003c\/td\u003e\n\u003ctd\u003eUL Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 10.05 lbs\u003c\/td\u003e\n\u003ctd\u003eNon-Dimmable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 120V AC or 277V AC\u003c\/td\u003e\n\u003ctd\u003eSuitable for Damp Locations \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 1.8 \u003c\/td\u003e\n\u003ctd\u003e8+ Hour Runtime without remote heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 45\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: 50,000+ Hours\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp Range: 68°F - 122°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material: 20 Gauge Steel w\/ Neutral White Finish \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount: Wall, Junction Box or Conduit \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Type: Sealed, 3.6V Maintenance-free Nickel Cadmium \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Backup Runtime: 8hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n \u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe GAU-EMG-2X2W-8H from Larson Electronics is an Emergency LED Bugeye System that is suitable for indoor\/outdoor work sites and damp locations. This heavy-duty emergency light features two, LED lamp heads and a 8-hour battery backup system. Designed to operate on 120V AC or 277V AC, the fixture comes with a push-to-test switch for streamlined inspection and maintenance. The GAU-EMG-2X2W-8H can run for 8+ hours without installing remote heads.\nThe GAU-EMG-2X2W-8H offers illuminative support during emergencies and abnormal conditions. This 2-watt unit consists of adjustable, dual 1W LED light heads and operates on 120V AC or 277V AC. During operation, the LED lamps emit 240 lumens of white light in a flood beam configuration. \nThe LED fixture features a battery backup system for continuous operation during emergencies. A sealed 3.6V maintenance-free nickel cadmium battery provides up to 8 hour of backup and will automatically recharge within 24 hours via an internal, solid-state two-rate charger. A push-to-test switch allows inspectors to quickly assess the status of the luminary. The GAU-EMG-2X2W-8H can run for 8+ hours when no remote heads are installed. For reliable performance, this unit is constructed of durable 20 gauge steel and features a neutral white finish. Operators may deploy the emergency LED sign in damp locations. \nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\nMounting: The GAU-EMG-2X2W-8H is compatible with wall mount installations. The back plate features a universal knockout pattern for wall mounting requirements and the top and sides feature knockouts for conduit applications. An easy-snap mounting canopy is available for seamless top or end mounting. \nApplications: Indoor\/outdoor work sites, damp locations, marine facilities, emergency systems, doorways, walkways, hallways, fire safety and more. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 100px;\"\u003e\n \n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252301493,"sku":"PL3-GAU-EMG-2X2W-8H","price":492.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-EMG-2X2W-8H.jpg?v=1628906525"},{"product_id":"pl3-ind-12-ips-led-uvc-1227","title":"Larson 2W Low Profile Industrial Ultraviolet LED Light - Low Voltage UVC Germicidal Linear Fixture - 13.38\" Long","description":"Buy American Compliant\r\u003cbr\u003eThe Larson Electronics IND-12-IPS-LED-UVC-1227 is a low voltage ultraviolet industrial germicidal lighting solution that is NRTL listed to UL 1598 standards for use in wet locations. This powerful 13.38\" long LED strip 2W light produces 3500 mW radiant intensity, operates on 12 V DC or 24 V DC, and is suitable for non-hazardous locations where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing, as well as food processing, vision systems, and automation systems.\r\u003cbr\u003e*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. \r\r\u003cbr\u003e*\r\u003cbr\u003eThe IND-12-IPS-LED-UVC-1227 is designed to provide a high output and ruggedly durable lighting solution for applications where ultraviolet light is needed. This low voltage industrial germicidal UV light emits light in the ultraviolet spectrum. This 280nm strip light can be operated on 120-240V AC current and includes 6 feet of connecting lead with standard two wire configuration. The housing is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 13.38\" long strip or \"bar\" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.\r\u003cbr\u003eThe IND-12-IPS-LED-UVC-1227 uses LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and lightweight as well.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eThis industrial germicidal LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing and inspection, and in paint, coating, and adhesive curing. The IND-12-IPS-LED-UVC-1227 provides operators with a reliable and durable UV lighting solution that offers the production of UV light for leak detection, vision systems, automation systems, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing.\r\u003cbr\u003eUltraviolet Wavelength:\r\u003cbr\u003eUltraviolet C Wavelength produces a short wave between the 200nm - 280nm spectrum. This industrial germicidal LED light has a peak wavelength of 280nm.\r\u003cbr\u003e\u003cstrong\u003eDurability:\u003c\/strong\u003e\r\u003cbr\u003eThe IND-12-IPS-LED-UVC-1227 industrial LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered.\r\u003cbr\u003eMounting:\r\u003cbr\u003eMounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170° vertically for the best placement. The IND-12-IPS-LED-UVC-1227 weighs 0.7 lb and measures 13.38 inches in length, and 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.\r\u003cbr\u003eWiring\/Power:\r\u003cbr\u003eThis light is universal voltage capable and operates on AC\/DC voltages from 11-25 Volts. Each strip light is equipped with 6 feet of 16\/3 SOOW cable containing a standard two wire (White+ Black-) connecting configuration for making power connections.\r\u003cbr\u003eVersatility:\r\u003cbr\u003eThe IND-12-IPS-LED-UVC-1227 carries an IP65 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations where dusty or wet conditions are commonly encountered.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\r\u003cbr\u003eNote on Environment\r\u003cbr\u003e: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  UV LED\u003cbr\u003eDimensions:  13.38\"L x 2.68\"W x 1.69\"D\u003cbr\u003eWeight:  0.7 lb | 0.3 kg\u003cbr\u003eWatts:  2\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120-240V AC \u003cbr\u003eTotal Intensity:  25 mW\/cm2 \u003cbr\u003eRadiant Intensity:  3500 mW\u003cbr\u003eLamp Life Expectancy:  5,000 Hours\u003cbr\u003eAmps:  0.09 A @ 12 V DC - 0.045 A @ 24 V DC\u003cbr\u003eLight Color:  280NM - Ultraviolet\u003cbr\u003eBeam Angle:  100°\u003cbr\u003eLighting Configuration: Flood Pattern\u003cbr\u003ePower Efficiency:  \u0026gt;95%\u003cbr\u003ePower Factor:  0.992\u003cbr\u003eAmbient Operating Temp Range: -40°C to +65°C\u003cbr\u003eOperating Temp Rating:  T3\u003cbr\u003eHousing Material:  Extruded Aluminum\u003cbr\u003eHousing Finish:  Powder Coated - Black\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eGasket Material:  Silicone\u003cbr\u003eMounting:  Adjustable Swivel Mount Surface Bracket\u003cbr\u003eWiring:  6' 16\/2 SOOW w\/ Flying Leads\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252334261,"sku":"PL3-IND-12-IPS-LED-UVC-1227","price":3778.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-12-IPS-LED-UVC-1227-1.jpg?v=1610917345"},{"product_id":"pl3-ledwp-lp-300-knl-dcm","title":"Larson 30 Watt LED Flood Light - 3000 Lumens - 120-277V AC - IP66 Rated - Knuckle Mount","description":"The LEDWP-LP-300-KNL-DCM LED Flood Light offers high light output from a compact form factor and is ideal for a wide range of uses including façade lighting, wall washing, landscape illumination and building lighting. This LED flood light produces a 3000 lumen light output with very low amp draw, 50,000 hour service life and 120-277V AC compatibility which provides operators with a compact and powerful LED lighting solution.\r\u003cbr\u003eThe LEDWP-LP-300-KNL-DCM LED Flood Light from Larson Electronics produces 3000 lumens of bright light while drawing only 30 watts. The long lasting LEDs have a 50,000 hour rated lifespan with a CRI of 70 and color temperature of 4,000K or 5,000K. The flood beam is NEMA 7Hx7V, a very wide spread ideal for general or accent lighting.\r\u003cbr\u003eThis LED flood light is IP66 rated with housing constructed of rugged aluminum that is coated with a UV resistant powder, available in black or dark bronze, for additional corrosion protection. The fixture is UL wet location listed, suitable for outdoor use where the potential exposure of ultraviolet light, moisture or full water immersion exists. The LEDWP-LP-300-KNL-DCM operates in extreme temperatures from -40ºC to 45ºC and includes an unbreakable polycarbonate lens that protects the LEDS against the buildup or intrusion of dust, dirt and humidity.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThe LEDWP-LP-300-KNL-DCM is mounted with an adjustable trunnion mount made of die-cast aluminum, which provides operators with mounting flexibility in a variety of locations.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120-270V AC\u003cbr\u003eTotal Watts:  30 \u003cbr\u003eTotal Lumens:  3000\u003cbr\u003eLumen Efficacy:  100 lm\/w\u003cbr\u003eLamp Life Expectancy:  50,000 hours\u003cbr\u003eColor Temperature: 4000K, 5000K\u003cbr\u003eColor Rendering Index:  CRI 70\u003cbr\u003eLighting Configuration: Flood\u003cbr\u003eAmbient Operating Temperature Range:  -40ºC to 45ºC\u003cbr\u003eHousing Material:  Aluminum\u003cbr\u003eHousing Finish:  Black or Dark Bronze\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  1\/2\" Knuckle Mount\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252399797,"sku":"PL3-LEDWP-LP-300-KNL-DCM","price":194.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWP-LP-300-KNL-DCM-1.jpg?v=1610917349"},{"product_id":"pl3-gau-trf-2x2-3l-lvr-visuvc-t8-v1","title":"Larson 2X2 Recessed Troffer Mount Germicidal UV-C Fixture - 120\/277V AC - (2) Standard T8, (1) UVC -kill 99% of viruses","description":"","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252432565,"sku":"PL3-GAU-TRF-2X2-3L-LVR-VISUVC-T8-V1","price":1392.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-TRF-2X2-3L-LVR-VISUVC-T8-V1-1.jpg?v=1610917350"},{"product_id":"pl3-gau-hb-2x150led-rt","title":"Larson 300W High Bay LED Light Fixture - 35,000 lms - IP67 Rated - Weatherproof","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252465333,"sku":"PL3-GAU-HB-2X150LED-RT","price":8872.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-HB-2X150LED-RT-1.jpg?v=1610917353"},{"product_id":"pl3-spledxl-24v-160al-12-2-20c-n4-20c-m1","title":"300W Pole Mounted Solar Panel - 3 Day Run Time @ 50W - (4) 40aH 24V Li-ion Batteries - N4 Enclosure","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003ePLEDXL-24V-160AL-12.2-20C-N4-20C-M1 Pole Mount Solar Panel\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 14px; width: 61%;\"\u003eDimensions:  -\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003ePole Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWatts (Solar Panels): 300W\u003c\/td\u003e\n\u003ctd\u003eNEMA 4 Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eVoltage: 24V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Bank:  (8) 40aH 12V Lithium-ion Battery Bank wired in series\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Capacity:  160aH Total- 100% Usable\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eRuntime: Operate a 50W 24V Device up to 12 Hours\/Day - 3 Days of Automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation:  24\/7, On\/Off, Day\/Night, External or Motion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials:  -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount:  Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole Size Options:  2\", 2 1\/4\", 2 1\/2\", 2 3\/4\" or 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord:  20' 12\/3 SOOW Cord Between Panel and Battery Box, 20' 12\/3 SOOW Cord w\/ Blunt-cut End Between Output Box and Customer-provided Equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe Larson Electronics PLEDXL-24V-160AL-12.2-20C-N4-20C-M1 Pole Mounted Solar Panel is an ideal power solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 300W solar panel includes 20 feet of 12\/3 SOOW cord for powering any 24V DC device from the NEMA 4 battery enclosure. Higher wattage devices may run for shorter time periods.\nThis solar panel is powered by four, 40aH lithium-ion batteries (160aH total, 100% usable) that are recharged by the 300-watt solar panel during sunlight and operates on a 24V system. The solar panel will operate three full days without sunlight on a single charge, when powering a 50-watt 24V device for up to 12 hours\/day. The lithium-ion battery pack is protected by a NEMA 4 enclosure, which enhances durability against rain, debris and external ice formation. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. \nOperation: This solar panel is configured to operate non-stop 24\/7, day\/night with photocell, motion sensor for security purposes, on\/off switch for manual operation, or flying leads for operators to connect to user provided external switches. The day\/night and motion sensor is programmed to activate the solar panel in the evening and to shut it off during the day, activating the connected equipment when ambient lighting falls below 1 lux. The motion sensor will activate the panel upon detecting movement within range of the panel. The on\/off switch for manual operation is mounted at the battery bank, to allow operators to manually power their devices on or off as needed.\nCord: The included 20' 12\/3 SOOW cord that runs between the solar panel and the battery box offers operators convenience and flexibility during the mounting process. A 20' 12\/3 SOOW cord with blunt-cut ends is also available between the NEMA 4 rated battery enclosure and customer-provided equipment.\nMounting: Mounting options include the ability to attach the solar panel to flat surfaces, such as walls, or round\/square pole mounting, such as on flagpoles or structure supports. For secure mounting, select the appropriate pole OD size when ordering. \nSuggested uses for this solar panel include both commercial and industrial applications as well as consumer based installations. This panel is ideal for boat docks, remote locations that rely on batteries for power, hunting cabins, parking areas, and anywhere a standalone power solution is needed.\n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252498101,"sku":"PL3-SPLEDXL-24V-160AL-12.2-20C-N4-20C-M1","price":12242.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-24V-160AL-12.2-20C-N4-20C-M1.jpg?v=1629343664"},{"product_id":"pl3-spledxl-12v-160al-12-2-20c-n4-20c-m1","title":"300W Pole Mounted Solar Panel - 3 Day Run Time @ 50W - (4) 40aH 12V Li-ion Batteries - N4 Enclosure","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSPLEDXL-12V-160AL-12.2-20C-N4-20C-M1 Pole Mount Solar Panel\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 14px; width: 61%;\"\u003eDimensions:  -\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight:  -\u003c\/td\u003e\n\u003ctd\u003ePole Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWatts (Solar Panels): 300W\u003c\/td\u003e\n\u003ctd\u003eNEMA 4 Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eVoltage: 12V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Bank:  (4) 40aH Lithium-ion Battery Bank\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eBattery Capacity:  160aH Total- 100% Usable\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eRuntime: Operate a 50W 12V Device up to 12 Hours\/Day - 3 Days of Automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation:  24\/7, On\/Off, Day\/Night, External or Motion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials:  -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount:  Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePole Size Options:  2\", 2 1\/4\", 2 1\/2\", 2 3\/4\" or 3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCord:  20' 12\/3 SOOW Cord Between Panel and Battery Box, 20' 12\/3 SOOW Cord w\/ Blunt-cut End Between Output Box and Customer-provided Equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe Larson Electronics SPLEDXL-12V-160AL-12.2-20C-N4-20C-M1 Pole Mounted Solar Panel is an ideal power solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 300W solar panel includes 20 feet of 12\/3 SOOW cord for powering any 12V DC device from the NEMA 4 battery enclosure. Higher wattage devices may run for shorter time periods.\nThis solar panel is powered by four, 40aH lithium-ion batteries (160aH total, 100% usable) that are recharged by the 300-watt solar panel during sunlight and operates on a 12V system. The solar panel will operate three full days without sunlight on a single charge, when powering a 50-watt 12V device for up to 12 hours\/day. The lithium-ion battery pack is protected by a NEMA 4 enclosure, which enhances durability against rain, debris and external ice formation. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. \nOperation: This solar panel is configured to operate non-stop 24\/7, day\/night with photocell, motion sensor for security purposes, on\/off switch for manual operation, or flying leads for operators to connect to user provided external switches. The day\/night and motion sensor is programmed to activate the solar panel in the evening and to shut it off during the day, activating the connected equipment when ambient lighting falls below 1 lux. The motion sensor will activate the panel upon detecting movement within range of the panel. The on\/off switch for manual operation is mounted at the battery bank, to allow operators to manually power their devices on or off as needed.\nCord: The included 20' 12\/3 SOOW cord that runs between the solar panel and the battery box offers operators convenience and flexibility during the mounting process. A 20' 12\/3 SOOW cord with blunt-cut ends is also available between the NEMA 4 rated battery enclosure and customer-provided equipment.\nMounting: Mounting options include the ability to attach the solar panel to flat surfaces, such as walls, or round\/square pole mounting, such as on flagpoles or structure supports. For secure mounting, select the appropriate pole OD size when ordering. \nSuggested uses for this solar panel include both commercial and industrial applications as well as consumer based installations. This panel is ideal for boat docks, remote locations that rely on batteries for power, hunting cabins, parking areas, and anywhere a standalone power solution is needed.\n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252530869,"sku":"PL3-SPLEDXL-12V-160AL-12.2-20C-N4-20C-M1","price":9386.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-12V-160AL-12.2-20C-N4-20C-M1.jpg?v=1629343659"},{"product_id":"pl3-spledxl-wg300-24v-240ah-lp-12-3-20c","title":"300W Pole Mounted Solar Panel - (4) 80aH Li-ion Batteries - (3) 20' 12\/3 SOOW Cords - Wind Generator","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSPLEDXL-WG300-24V-240AH.LP-12.3-20C Pole Mount Solar Panel with Wind Generator\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003ePanel Dimensions: 65.43\"L x 38.98\"W x 1.81\"H\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter: 4'\u003c\/td\u003e\n\u003ctd\u003ePole Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotors: (3)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Wattage: 300W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 24V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWind Generator Rated Power: 400W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWind Generator Rated Speed: 14 M\/S\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWind Generator Starting Wind Speed: 6 MPH\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWind Generator Survival Wind Speed: 110 MPH\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Type: Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Capacity: (4) 12V 80aH Lithium-ion Batteries, Wired for 24V - 160aH Usable\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders-Special Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRun Time: 6 Days of Automation w\/o Sun for 0.25A Draw, 3 Days of Automation w\/o Sun for 0.5A Draw, 1.5 Days of Automation w\/o Sun for 1A Draw, 0.75 Days of Automation w\/o Sun for 2A Draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Polypropylene and Fiber Glass (Wind Generator Rotors)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: NEMA 3R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 20' 12\/3 SOOW Cord between Battery Box and Panel, 20' 12\/3 SOOW Cord from Battery Box to Wind Turbine, 20' 12\/3 SOOW Cord from Battery Box to Customer Device\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"593\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 587px;\"\u003e\nThe Larson Electronics SPLEDXL-WG300-24V-240AH.LP-12.3-20C Pole Mount Solar Panel is an ideal power solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This solar-powered system consists of one 300W solar panel, four 80aH lithium-ion batteries and a 400W wind turbine. The battery bank is protected by a NEMA 3R enclosure.\nThis solar panel is powered by four 12V 80aH lithium-ion batteries that are recharged by the 300-watt solar panel during sunlight. This pole mount unit operates on a 24 voltage system. The solar-powered solution offers the following run times: 6 days automation w\/o sun for 0.25 amp draw,\n3 days automation w\/o sun for 0.5 amp draw,\n1.5 days automation w\/o sun for 1 amp draw and\n0.75 days automation w\/o sun for 2 amp draw. The lithium-ion battery pack is contained within the solar panel in a NEMA 3R enclosure. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. \nWind Generator: A 400-watt wind turbine generates power when outdoor conditions exceed 6 mph. Equipped with three fiber glass rotors, the unit is resistant to harsh weather, UV rays, heavy rain and up to level 3 hurricanes. \nWiring: An included 20` 12\/3 SOOW cord runs between the solar panel and the battery box, offering operators convenience and flexibility during the mounting process. A second 20' 12\/3 SOOW cord is available from the battery box to the wind generator; and a third 20' 12\/3 SOOW cord runs from the battery box to a customer-provided device.\nMount: Mounting options include the ability to attach the fixture to flat surfaces such as walls or round\/square pole mounting such as on flagpoles or structure supports.\nApplications: Suggested uses for this solar panel include both commercial and industrial applications as well as consumer based installations. This panel is ideal for boat docks, remote locations that rely on batteries for power, hunting cabins, parking areas, and anywhere a standalone power solution is needed.\n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252563637,"sku":"PL3-SPLEDXL-WG300-24V-240AH.LP-12.3-20C","price":10658.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-WG300-24V-240AH.LP-12.3-20C.jpg?v=1629343657"},{"product_id":"pl3-spledxl-24v-240ah-lp-12-3-20c","title":"300W Pole Mounted Solar Panel - (6) 80aH Li-ion Batteries - (2) 20' 12\/3 SOOW Cords","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eSPLEDXL-24V-240AH.LP-12.3-20C Pole Mount Solar Panel\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eSummary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003ePanel Dimensions: 65.43\"L x 38.98\"W x 1.81\"H\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003ePole Mounted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Wattage: 300W\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 24V\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Type: Lithium-ion \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Capacity: (6) 12V 80aH Lithium-ion Batteries, Wired for 24V - 240aH Usable\u003c\/td\u003e\n\u003ctd\u003eSpecial Orders-Special Requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRun Time: 14 Days of Automation w\/o Sun for 0.25A Draw, 7 Days of Automation w\/o Sun for 0.5A Draw, 3.5 Days of Automation w\/o Sun for 1A Draw, 1.75 Days of Automation w\/o Sun for 2A Draw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: -\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing: NEMA 3R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Pole\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 20' 12\/3 SOOW Cord between Box and Panel, 20' 12\/3 SOOW Cord from Battery Box to Customer Device\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"593\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px; width: 587px;\"\u003e\nThe Larson Electronics SPLEDXL-24V-240AH.LP-12.3-20C Pole Mount Solar Panel is an ideal power solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This solar-powered system consists of one 300W solar panel and six 80aH lithium-ion batteries. The battery bank is protected by a NEMA 3R enclosure.\nThis solar panel is powered by six 12V 80aH lithium-ion batteries that are recharged by the 300-watt solar panel during sunlight. This pole mount unit operates on a 24 voltage system. The solar-powered solution offers the following run times: 14 days automation w\/o sun for 0.25 amp draw,\n7 days automation w\/o sun for 0.5 amp draw,\n3.5 days automation w\/o sun for 1 amp draw and\n1.75 days automation w\/o sun for 2 amp draw. The lithium-ion battery pack is contained within the solar panel in a NEMA 3R enclosure. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. \nWiring: An included 20` 12\/3 SOOW cord runs between the solar panel and the battery box, offering operators convenience and flexibility during the mounting process. A 20' 12\/3 SOOW cord is also available from the battery box to a customer-provided device.\nMount: Mounting options include the ability to attach the fixture to flat surfaces such as walls or round\/square pole mounting such as on flagpoles or structure supports.\nApplications: Suggested uses for this solar panel include both commercial and industrial applications as well as consumer based installations. This panel is ideal for boat docks, remote locations that rely on batteries for power, hunting cabins, parking areas, and anywhere a standalone power solution is needed.\n\n \n \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252596405,"sku":"PL3-SPLEDXL-24V-240AH.LP-12.3-20C","price":11088.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDXL-24V-240AH.LP-12.3-20C.jpg?v=1629343662"},{"product_id":"pl3-gaud-48-2x150led","title":"Larson 300W Low Profile Weatherproof LED Light - 2x4 Lay-In Troffer - 40,500 Lumens - General Areas","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics GAUD-48-2X150LED Low Profile Weatherproof LED Light is a compact and powerful lighting solution for industrial sites. This 300-watt LED panel mount fixture provides 40,500 lumens of white light output. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for metal halide lamps, flourescent fixtures and incandescent lights.\r\u003cbr\u003eThe GAUD-48-2X150LED is a 2x4 weatherproof lay-in LED light fixture that is ideal for use in industrial environments and locations wherein space for lighting fixtures is limited. This 300-watt LED fixture operates on universal 120-277V AC and offers 40,500 lumens of output with a color temperature of 5300K or 4000K. Each LED fixture contains sixteen CREE high output LEDs producing 1,350 lumens each are arranged in rows and paired with PMMA high purity optics to produce a well focused 24° wide spot beam that is ideal for providing far reaching concentrated illumination while still covering a substantial amount of area. We also offer optional optics with 10° spot, 38° narrow flood, 60° flood, and 90° wide flood beam spreads.\r\u003cbr\u003eThe LED assembly is protected by an aluminum framed, hinged, 3\/16\" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.\r\u003cbr\u003eThe copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 80,000 hour rated lifespan with 70% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThis fixture is designed for recessed mounting and requires a mounting hole to be made in ceilings capable of accommodating the fixture housing in order to provide the maximum amount of space during installation. Once mounted, this fixture`s door frame will extend 3\/8” into the space.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eGeneral illumination, outdoor lighting, commercial locations, warehouses, labs, industrial sites and more.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003eDimensions:   48\"-L x 24\"-W x D-5.38\"48\"-L x 24\"-W\u003cbr\u003eFlange Dimensions: 48\"-L x 24\"-W\u003cbr\u003eWeight: -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e 100-277V AC, 50\/60Hz\u003cbr\u003eTotal Watts:  300W\u003cbr\u003eTotal Lumens: 40,500 \u003cbr\u003eLuminous Efficacy: 135 Lm\/W\u003cbr\u003eLamp Life: 80,000+ Hours\u003cbr\u003eColor Temp:  5,300K or 4,000K\u003cbr\u003eBeam Angle:  10° Spot, 24° Wide Spot, 38° Narrow Flood, 60° Flood, or 90° Wide Flood\u003cbr\u003eOptics Efficiency:  98% - PMMA High Transmittance Optics\u003cbr\u003eLED Drive:  90%\u003cbr\u003eAmp Draw: 2.5A @ 120V, 1.25A @ 240V, 1.08A @ 277V\u003cbr\u003eAmbient Operating Temp Range:  -40° C to +80°C\u003cbr\u003eHousing Material:  Steel\u003cbr\u003eHousing Finish:  Powder Coated - White\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  Recessed Panel Mounting\u003cbr\u003eWiring Hub:  3\/4\" NPT\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252629173,"sku":"PL3-GAUD-48-2X150LED","price":5812.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAUD-48-2X150LED-1.jpg?v=1610917364"},{"product_id":"pl3-epl-pm-1x30led-120xlv-100","title":"30W Explosion Proof LED Light - Inline Transformer - 90-305VAC or 127-431VDC Stepped Down to 12VDC","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eEPL-PM-1X30LED-120X12I-100\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eUL and CSA Certified \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 61%;\"\u003eUL Listing: United States\/Canada \u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eClass I Groups C and D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Type: PAR38 LED \u003c\/td\u003e\n\u003ctd\u003eUL Standard: UL 1598, UL 844\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:12\"-Diam Base 16.75\"-H 13.9\"-Depth\u003c\/td\u003e\n\u003ctd\u003eUL Listed: E10794\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: 28 Lbs \u003c\/td\u003e\n\u003ctd\u003e500 hour salt-spray tested. Per MIL-F-8115C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Watts: 30\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 90-305V AC 50\/60Hz or 127-431V DC Stepped Down to 12V DC Via Transformer\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Lumens: 2500\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLUX: @ Lens-53,500 @ 1 Meter-1,950 \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Rendering Index: \u0026gt;84\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Aluminum Circular Pedestal Base\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 100 feet SOOW Cord w\/ General Area Cord Cap\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eCord Cap Options: 5-15 Straight, 6-15 Straight, L5-15 Twist, L6-15 Twist, UK BS1363, Intl. Schuko or Pigtail\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eOperating Temp Range: -20°C to +85°C \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Lamp Life: 50,000 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Color Temp: 5500K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials: Aluminum Housing - Polycarbonate Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWarranty: YES - 3 Years*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA\nThe EPL-PM-1X30LED-120XLV-100 from Larson Electronics is an Explosion Proof LED Light with booted inline transformer is UL Listed Class I Groups C and D and is rated for use in wet and marine environments. The waterproof construction and LED lamp used with this unit provides operators with excellent power and light quality coupled with high versatility and excellent durability. \nThe EPL-PM-1X30LED-120X12I-100 Pedestal Mounted Explosion Proof Light with booted inline transformer provides 1,500 square feet of work area coverage with 2,500 lumens of light output. The 30 watt LED lamp in this unit produces more illumination than a 150 watt halogen lamp, runs cooler, lasts far longer, and produces better color rendering and object contrast. This portable unit is waterproof and tested to 500 hours of salt spray exposure in accordance with MIL-F-8115C Military Specifications. An included inline transformer steps down 90-305V AC 50\/60Hz or 127-431V DC current to 12V DC to provide a low voltage lighting solution for areas where low voltage operation is preferable. \n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\nThis portable explosion proof LED light fixture is comprised of a 30 watt LED equipped light head mounted atop a circular pedestal base. The entire unit is fabricated from cast aluminum and is factory sealed and water tight. This unit requires no external seals, has a built in carrying handle, and the light head can be adjusted through 135° of vertical movement. The yoke is formed of high strength aluminum alloy, the lens is thermal shock and impact resistant glass, and the entire housing is formed of cast aluminum with an aluminum enamel coating. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e53` Container No Illumination \u003c\/td\u003e\n\u003ctd\u003eEPL-PM-1X30LED-120XLV-100 \u003c\/td\u003e\n\u003ctd\u003e53` Container w\/EPL-PM-1X30LED-120XLV-100 \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003ctd\u003eClick Photo to Enlarge \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr align=\"center\"\u003e\n\u003ctd\u003eEnergy Consumption Comparison (Ten Lamps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eIncandescent\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eCFL\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003eLED\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eWattage\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1500 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e420 watts\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e250 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 120V AC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e12.5 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e3.5 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2.08 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 12V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e125 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e35 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e20.84 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eAmp Draw @ 24V DC\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e62.5 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e17.4 amps\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e10.42 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eLamp Life Expectancy\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e1,875 hours\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e10,000 hours \u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e50,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 161px;\"\u003eColor Temperature\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e2850K\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e4300K\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e6000K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n \u003ctd style=\"width: 161px;\"\u003eOperation cost per year\n(8hs\/day @ 11c\/kWh)\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$481.80\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$134.91\u003c\/td\u003e\n\u003ctd style=\"width: 117px; text-align: center;\"\u003e$80.30\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\nThe 30 watt LED lamp in this unit is a PAR38 design and produces more lumens than a 150 watt halogen lamp. At 5500k color, the light from this unit is bright white in contrast to the yellowish hue of the standard halogen incandescent bulb. The operating temperature of this LED explosion proof light is approximately 55 degrees Fahrenheit as compared to the 198 degrees operating temperature of the 300 watt incandescent version. This makes the light easier to handle and move and doesn`t create additional heat in smaller, confined spaces. Additionally, the LED lamp in this unit has a far longer operational life at up to 50,000 hours as compared to the 600-100 hours for a standard halogen lamp. This greatly reduces the costs associated with frequently replacing lamps and servicing.\n\n\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eClick Photos to Enlarge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5-15 Straight Blade Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL5-15 Twist Lock Plug\n15 Amp \/ 125V Rated\u003c\/td\u003e\n\u003ctd\u003eL6-15 Twist Lock Plug\n15 Amp \/ 250V Rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUK BS1363 Straight Blade Plug\n13 Amp \/ 250V Rated \/ Internal Fuse \u003c\/td\u003e\n\u003ctd\u003eIntl Schuko 2-Pin Plug\n16 Amp \/ 250V Rated \/ Grounded \u003c\/td\u003e\n\u003ctd\u003eFlying Leads \/ Pigtail Wires\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n \n\n\nWiring: This explosion proof LED flood lighting system is equipped with 100` of 16\/3 chemical and abrasion resistant SOOW cord leading up to the encapsulated step down transformer, and 5` of 16\/3 SOOW cable on the input side of the transformer that is fitted with an industrial grade cord cap for easy connection to common wall outlets.\nPLEASE NOTE: The transformer on this unit is waterproof rated but is NOT explosion proof rated. The transformer must remain outside the hazardous environment.\nThis lamp is extremely rugged and ideal for use in marine environments where damage due to salt water spray and dampness is an issue.\nPlug: Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, standard 6-15 15 amp straight blade plug for 220-240V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, NEMA L6-15 15 amp twist lock plug for 240V twist lock outlets, British BS1363 13 amp fused 3-blade plug for United Kingdom outlets, or a two pin 16 amp rated Schuko plug with ground contact and socket for European outlets up to 250V. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.\nPLEASE NOTE: The cord cap on this unit is outdoor rated but is NOT explosion proof rated. Electrical connections must be made outside the hazardous environment.\n\n\n\u003ctable cellpadding=\"2\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 50%; height: 28px;\"\u003eMade in USA Quality\u003c\/td\u003e\n\u003ctd style=\"width: 50%;\"\u003eSuperior LED Benefits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 230px;\"\u003e\n1. Each unit dialectrically tested.\n2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable circular pedastal base enables the operator to choose any mounting angle for the fixture.\n3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy with aluminum alloy yoke.\n4. Thermal shock and impact resistant polycarbonate lens. \n5. Factory sealed, no external seals required.\n6. 500 hour salt-spray tested. Per MIL-F-8115C. \n7. 100` 16\/3 SOOW cord and general area plug included.\n\n\n\n\u003c\/td\u003e\n\u003ctd\u003e\n1. 50,000 hour lifespan.\n2. Can SAVE 50% or more on energy.\n3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\n4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\n5. 100% recyclable.\n6. No toxins-lead, mercury.\n7. No UV light, infrared radiation or CO2 emissions.\n8. Qualifies buildings for LEED and other sustainable business certifications.\n9. Bright, even light maintains consistent color over time.\n10. Instant on\/off - No flickering, delays or buzzing. \n11. Very good color rendering.\n12. Vibration\/impact resistant.\n13. Significantly cooler operation.\n14. Less frequent outages, higher output improves workplace safety.\n15. California Title 24 Compliant\n\u003c\/td\u003e\n \u003c\/tr\u003e\n\n\u003c\/table\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252661941,"sku":"PL3-EPL-PM-1X30LED-120XLV-100","price":3208.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-EPL-PM-1X30LED-120XLV-100.jpg?v=1628564955"},{"product_id":"pl3-spledl-2x-ledlp-300-knl-20c","title":"30W Solar Powered LED Light - 3000 lms - (2) 60W Panels, (2) 40aH Li-ion Batteries","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 59%;\"\u003eSPLEDL-2X-LEDLP-300-KNL-20C Solar Powered LED Light\u003c\/td\u003e\n\u003ctd style=\"width: 41%;\"\u003eQuick Summary\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 59%;\"\u003eSolar Panel\/Battery Specs:\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eReplacement for 100W-120W Metal Halide Fixtures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Qty:  (2)\u003c\/td\u003e\n\u003ctd style=\"width: 39%;\"\u003eListed for Wet Locations - LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSolar Panel Watts: 120W (60W per Panel)\u003c\/td\u003e\n\u003ctd\u003e100% Solar - Requires no External Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperation: 24\/7, On\/Off, Day\/Night, Motion, or Flying Leads\u003c\/td\u003e\n\u003ctd\u003eIP66 Rated LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery: (2) 40aH Lithium-ion Batteries, 80aH Usable\u003c\/td\u003e\n\u003ctd\u003e50,000+ Hour LED Lamp Life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharging Time: 5 Hours\u003c\/td\u003e\n\u003ctd\u003eSurface or Post Mount Solar Panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRuntime: 12 Hours\u003c\/td\u003e\n\u003ctd\u003e Remote Mount LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePanel Mounting: Surface or Post\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring: 10` SOOW Cable w\/ Deutsch 2-pin Disconnect Between Solar Panels and Charge Control Box\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLED Light Specs:\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Technology: LED\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions:  -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 30W\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 3,000 lms\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLuminous Efficacy: 100 lm\/w\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLamp Life Expectancy: 50,000 Hours\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor Temperature: 5,000K\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCRI: 70\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBeam Type: Flood (NEMA 7Hx7V)\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Efficiency:  -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Factor:  -\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmps: -\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmbient Operating Temperature: -40°C to +45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Materials: Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Bronze\u003c\/td\u003e\n\u003ctd\u003eToll Free:1-800-369-6671\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLens Materials: Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMounting: 1\/2\" Knuckle Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWiring: 10` SOOW Cable w\/ Deutsch 2-pin Disconnect Between Charge Control Box and LED Light\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\n\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nMade in the USA \nThe SPLEDL-2X-LEDLP-300-KNL-20C from Larson Electronics is a Solar Powered LED Light that is an ideal lighting solution for remote areas and standalone applications where connection to external power is either impractical or unavailable. This 30-watt solar powered LED light is offered in a floodlight beam pattern and several different operating configurations, making it ideal for remote applications and replacing 100W-120W metal halide lamps. A 1\/2\" knuckle mount allows the LED lamp to be secured at a separate location from the panel. \nThis solar LED light is powered by two, 40aH lithium-ion batteries that are recharged by two, 60-watt solar panels. Light output comes from a 30-watt LED lamp that produces 3,000 lumens of bright light. The long lasting LEDs have a 50,000-hour rated lifespan with a CRI of 70 and color temperature of 5,000K. The flood beam is NEMA 7Hx7V, a very wide spread ideal for general or accent lighting. This LED light is designed to replace 100W-120W metal halide fixtures.\nDurability: This LED flood light is IP66 rated with housing constructed of rugged aluminum that is coated with a UV resistant powder, available in dark bronze, for additional corrosion protection. The fixture is wet location listed and suitable for outdoor use where potential exposure to ultraviolet light, moisture or full water immersion exists. The unit operates in extreme temperatures from -40ºC to 45ºC and includes an unbreakable polycarbonate lens that protects the LEDs against buildup or intrusion of dust, dirt and humidity.\nLED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\nLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. \nHeat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or \"duty cycle\" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 171px;\"\u003e\n\u003ctable height=\"150\" width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\n\n\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"font-family: Verdana;\"\u003e\n\u003ctd style=\"height: 105px;\"\u003e\nSolar Panels: The two, 60-watt solar panels are configured to operate non-stop 24\/7, day\/night with photocell, motion sensor for security purposes, on\/off switch for manual operation, or flying leads for operators to connect to user provided external switches. The day\/night and motion sensor is programmed to activate the solar panel in the evening and to shut it off during the day, activating the LED light when ambient lighting falls below 1 lux. The motion sensor will activate the panel upon detecting movement within range of the panel. \nThe light runs for 12 hours when the battery is fully charged. The lithium-ion battery pack is contained within the solar panel, not the light. Charging time for the battery is 5 hours when exposed to direct sunlight. As with all solar powered equipment, charging time is affected by the amount of available ambient light. When ambient light levels drop below a certain level, such as on cloudy days, the unit will not recharge. The included 10` SOOW cord with Deutsch 2-pin disconnect that runs between the solar panel and the light offers operators convenience and flexibility during the mounting process. \n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd colspan=\"3\"\u003eMounting \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 34%;\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 33%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound Pole \u003c\/td\u003e\n\u003ctd\u003eSquare Pole \u003c\/td\u003e\n\u003ctd\u003eSurface \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\nMounting: The LED light is mounted with a 1\/2\" knuckle mount made of die-cast aluminum, which provides operators with mounting flexibility in a variety of locations.\nLarson Electronics has further upgraded the options available with this light. A ten foot extension cord connects the solar panel to the LED light, allowing the light to be mounted separately from the panel. This means the solar panel can be mounted in direct sunlight while the light is mounted in a workspace. The cord between the light and panel ends in Deutsch connectors, allowing an optional longer extension cord to be attached, increasing the distance the light can be installed from the panel. Optional longer extension cords are available at additional cost. Larson Electronics can also configure this light for special requirements including different lights and larger batteries.\nSuggested uses for this light include both commercial and industrial applications as well as consumer based installations. This light is ideal for boat docks, remote locations that rely on batteries for power, exterior outbuilding lighting, hunting cabins, parking areas, sign or entryway illumination, driveway lighting and anywhere a standalone lighting solution is needed.\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 160px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252694709,"sku":"PL3-SPLEDL-2X-LEDLP-300-KNL-20C","price":4984.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-SPLEDL-2X-LEDLP-300-KNL-20C.jpg?v=1629343696"},{"product_id":"pl3-ind-ld-4p18-24-2l-ms-120v-6c","title":"Larson 36W Germicidal UV-C Fixture -  (2) T5 Lamps - Motion Sensor, Remote - 6' 18\/3 SJTW Cord","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics IND-LD-4P18-24-2L-MS-120V-6C  UV-C Germicidal Fluorescent Fixture disinfects  99% of viruses, bacteria, mold and spores in large facilities. This budget-friendly sanitation fixture operates on 120V AC or 120\/277V AC and consists of two, T5 fluorescent lamps that each provide 5 watts of UV-C output at a range of 200nm - 280nm (254nm). For long-term sanitation, we offer an enhanced and more durable version of this unit (see\r\u003cbr\u003eIND-LP-24-2L-UVC-T8-V1\r\u003cbr\u003e).\r\u003cbr\u003e*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. \r\r\u003cbr\u003e*\r\u003cbr\u003eThe IND-LD-4P18-24-2L-MS-120V-6C  is a  convenient sanitation solution for general area lighting systems and commercial indoor spaces. Equipped with two T5 UV fluorescent lamps, this system offers 10 watts of total UV output, within the 200nm - 280nm UV-C range (254 nm). The lights have an expected lifespan of 8,000+ hours and emit a flood beam pattern. With two 18\" long lamps, this UV system caters to a wide range of sanitation activities via  180 degrees of coverage. A white surface reflector promotes  light distribution during UV treatment.\r\u003cbr\u003eThe UV light can disinfect over 99% of  viruses, bacteria, mold and spores.\r\u003cbr\u003eThis unit is made out of 16-gauge powder coated steel with a white finish.   A built-in on\/off switch is available at the front of the unit. An included PIR motion sensor provides an extra layer of safety by deactivating the unit upon sensing movement within its line of sight. A compact remote can be used to turn the fixture on and off, as well as set 15-minute and 30-minute runtimes.\r\u003cbr\u003eWe offer a heavy-duty version of this UV-C fixture, which is designed for rugged applications (see\r\u003cbr\u003eIND-LP-24-2L-UVC-T8-V1\r for more information). This alternative is more powerful (at 18.2 watts of total UV output, compared to 10 watts of total UV output) and can cover up to 500 square feet of space during UV treatment. Effective coverage with the dual-lamp fixture depends on the mounting height. When it comes to size, this superior alternative is longer, slimmer and shorter than the budget-friendly unit. The UV-C fixture's extended size helps promote beam coverage, while its slimmer and shorter profile caters to space-saving installations. Protected by a cold rolled steel housing with a flat white polyester finish, this  model does not need to be frequently replaced, as it is suitable for long-term sanitation.\r\u003cbr\u003eVoltage\/Wiring:\r\u003cbr\u003eThe UV-C sanitation fixture operates on 120V AC when using the included 6' 18\/3 SJTW cord with 5-15P cord cap. Two 1\/2\" NPT knockouts are available for direct wiring to 120\/277V AC power sources, which allows the unit to operate on 120\/277V AC power.\r\u003cbr\u003eMount:\r\u003cbr\u003eThe IND-LD-4P18-24-2L-MS-120V-6C is compatible with surface mounting applications. Operators may access thru-holes at the back of the unit during installation. Four additional knockouts are available, which caters to different types of customer-preferred mounting requirements.\r\u003cbr\u003eNote on Environment:\r\u003cbr\u003eSunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.\r\u003cbr\u003e\u003cstrong\u003eSuggested \u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/strong\u003e\r\u003cbr\u003eSanitation, disinfection, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers, casinos, labs, hospitals, work stations, hotels and more; kill 99% of viruses, bacteria, mold and spores.\r\u003cbr\u003eLarson Electronics is a manufacturer and as such can build stationary and portable transformer systems to your \u003cstrong\u003eSpecifications\u003c\/strong\u003e. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1(647) 254-9757 or\r\u003cbr\u003eContact info@purilite.ca\r\u003cbr\u003eto discuss your specific requirements.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eUnit Type: UV-C Germicidal Fluorescent Light\u003cbr\u003eLamp Technology: UV Fluorescent - Sanitation\u003cbr\u003eLamp Qty: (2) 18\" Lamps\u003cbr\u003eDimensions:  24.93\"-L x 5.32\"-D x 3.37\"-H\u003cbr\u003eWeight:  -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120\/277V AC via Direct Wiring, or 120V AC w\/ Included 6' 18\/3 SJTW Cord and 5-15P Cord Cap\u003cbr\u003eTotal Watts:  36W\u003cbr\u003eSingle-lamp Watts:  18W\u003cbr\u003eTotal UV Output:  10W\u003cbr\u003eSingle-lamp UV Output:  5W\u003cbr\u003eUV Irradiance:  -\u003cbr\u003eExpected Lifespan:  8,000+ Hours \u003cbr\u003eUV Wavelength:  200nm - 280nm (254nm)\u003cbr\u003eMaximum Area Coverage:  -\u003cbr\u003eLamp Type:  T5 Fluorescent\u003cbr\u003eLamp Base:  4-pin\u003cbr\u003eReplacement Lamp:  -\u003cbr\u003eBeam Angle:  180º\u003cbr\u003eLight Configuration:  Flood\u003cbr\u003ePower Efficiency:  -\u003cbr\u003ePower Factor:  -\u003cbr\u003eBuilt-in Switch:  On\/Off\u003cbr\u003eSensor Type:  PIR Motion Sensor\u003cbr\u003eRemote Functions:  On\/Off, 15-minute Runtime, 30-minute Runtime\u003cbr\u003eAmps:  0.3A @ 120V\u003cbr\u003eAmbient Operating Temp:  -\u003cbr\u003eHousing Material:  16 Gauge Powder Coated Steel w\/ White Finish\u003cbr\u003eMounting:  Surface via Back-located Thru-holes; (4) Additional Mounting Knockouts Available\u003cbr\u003eWiring:  6' 18\/3 SJTW Cord w\/ Cord Cap\u003cbr\u003eCord Cap: \u003cbr\u003eKnockouts:  (2) 1\/2\" NPT Hubs @ Side for Direct Wiring to 120\/277V AC\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252727477,"sku":"PL3-IND-LD-4P18-24-2L-MS-120V-6C","price":2182.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-LD-4P18-24-2L-MS-120V-6C-1.jpg?v=1610917369"},{"product_id":"pl3-ledwp-emg-trn-40w-wcm","title":"37 Watt Wall Pack LED Light w\/ Emergency Battery Backup - 120\/277V - Failsafe","description":"\u003cdiv class=\"container-fluid\" id=\"ProductPageSpecContainer\"\u003e\n\u003cdiv class=\"container-fluid\" id=\"ProductPageProductSpecHeader\"\u003e\u003cb\u003eSpecifications \/ Additional Information\u003c\/b\u003e\u003c\/div\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLEDWP-EMG-TRN-40W-WCM Wall Pack Light\u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eLEDWP-EMG-TRN-40W-WCM Features\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003ctable width=\"100%\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"width: 56%;\"\u003eLamp Type: LED \u003c\/td\u003e\n\u003ctd style=\"width: 44%;\"\u003eWaterproof\/Vapor Proof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions: W-12 7\/8\"  H-16 3\/8\"\u003c\/td\u003e\n\u003ctd\u003eOperates on Standard 110-277 VAC \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWatts: 37\u003c\/td\u003e\n\u003ctd\u003eImpact\/Vibration Resistant Construction \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLumens: 3,071\u003c\/td\u003e\n\u003ctd\u003e50,000 Hour LED Life \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage: 110-277 Volts AC 50\/60hz\u003c\/td\u003e\n\u003ctd\u003eETL Approved for Wet Locations \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLighting Configuration: Flood \u003c\/td\u003e\n\u003ctd\u003eIP65 Waterproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting: Trunnion U-bracket\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eAmps: 0.83\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eLED Life Expectancy: 50,000 hours\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eColor Rendering Index: \u0026gt;75\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eMaterials: Aluminum Housing, Clear Flat Glass Lens\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color:Bronze\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eHousing Color: Black or White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003eWeight: 15.3 Lbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 14px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and\/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.\n\u003c\/td\u003e\n\u003ctd\u003e\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\n\u003c\/div\u003e '\n\u003cb\u003eProduct Overview\u003c\/b\u003e\n' \u003cdiv class=\"product-description-wrap\" itemprop=\"description\"\u003e\u003ctable width=\"550\" border=\"0\"\u003e\n\n\u003ctr\u003e\n\u003ctd style=\"height: 110px;\"\u003e\nThe Larson Electronics LEDWP-EMG-TRN-40W-WCM Emergency Wall Pack Light with Emergency Battery Backup offers high light output from a compact form factor and is designed to provide a more durable and long lasting alternative to halogen and metal halide units. This LED features an emergency battery backup for up to 90 minutes of runtime in emergency situations. This 37 watt LED runs on voltages of 120-277V AC and produces illumination comparable to a 100-150 watt metal halide unit without the high heat, fragile construction or high energy costs of incandescent lighting.\nThe LEDWP-EMG-TRN-40W-WCM LED wall pack light from Larson Electronics produces a long flood beam of light and features an emergency battery backup for up to 90 minutes of runtime in the event of a power outage. The light assembly consists of die-cast aluminum housing and ballast box with a bronze powedercoat finish over a chromate conversion coating. This LED wall pack is IP65 rated and designed to withstand demanding conditions and is resistant to water jets, vapor proof, and built to resist the damaging effects of an outdoor environment.\nThis emergency LED light features an added battery backup unit that adds emergency light functionality to the fixture. This emergency battery backup will run one bulb at the standard UL suggested 90 minutes after power is lost at 3,500 lumens. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency battery backup that is automatically recharged and kept in a ready state. The battery backup unit includes a switched leg for turning the light fixture on\/off without kicking the unit into emergency mode.\n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 200px;\"\u003e\nUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.\nThe mounting hardware on the LEDWP-EMG-TRN-40W-WCM features a trunnion-style mount design that allows for easy post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he\/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. \nWith the LEDWP-EMG-TRN-40W-WCM there is no warm up period, the light can be cycled on and off without any reduction in lamp life and the solid state LED design provides 50,000 hours of operation. The LEDWP-EMG-TRN-40W-WCM is ideal for indoor-outdoor applications and suitable for use as general area lighting, shop lighting, work space lighting, garage and warehouse lighting, and anywhere a rugged and dependable fixture with high output and efficiency is needed. \n\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"height: 380px;\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/table\u003e\u003c\/div\u003e","brand":"LARSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":38264252760245,"sku":"PL3-LEDWP-EMG-TRN-40W-WCM","price":2644.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDWP-EMG-TRN-40W-WCM.jpg?v=1628905705"},{"product_id":"pl3-gau-ledtrf-2x2","title":"Larson 40 Watt 2X2 Troffer Mount LED Fixture - Replacement for Fluorescent Fixtures - 2' x 2' -3,500 Lumens","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe Larson Electronics GAU-LEDTRF-2X2 troffer mount LED fixture provides an LED alternative to 2` x 2` fluorescent fixtures that provides longer lamp life and higher performance. This LED light fixture produces glare-free illumination that simulates natural daylight due to the transparent polycarbonate lens. This fluorescent light replacement fixture offers more output with longer lamp life and is vapor proof and impact\/vibration resistant.\r\u003cbr\u003eThe GAU-LEDTRF-2X2 is designed with efficiency in mind and in turn minimizes energy consumption. This LED light fixture from Larson Electronics does not produce any damaging ultraviolet or infrared radiation that can damage furnishings and other object. The GAU-LEDTRF-2X2 is a direct replacement fixture for 2` x 2` troffer mount fluorescent light fixtures.\r\u003cbr\u003eThis LED light offers tremendous lumen retention during its rated 50,000+ hour service life and is available in several different color temperatures including 3,500K, 4,000K, and 5,000K. This high-efficiency LED lighting option is designed to be simple to install and illuminate a variety of different areas including offices, healthcare buildings, schools, residential dwellings and others. The GAU-LEDTRF-2X2 can produce up to 3,500 lumens while drawing only 40 total watts and offering a luminous efficacy of 87.5 Lm\/W while offering durability and versatility that common fluorescent fixtures cannot match.\r\u003cbr\u003eThe GAU-LEDTRF-2X2 LED light panel weighs less than 8 pounds and has a slim profile with a depth under six inches. It is designed to be very easily installed. The LED lighting unit simply lifts through a grid cieling and rests directly on t-bars. This LED light is free of any harmful chemicals or other hazardous materials that some other lights have such as mercury. All of these features combine to make the GAU-LEDTRF-2X2 an ideal choice for a wide variety of applications and as a direct replacement for more costly and less efficient fluorescent fixtures.\r\u003cbr\u003eThe 40 watt LED lamps produce more illumination than standard fluorescent bulbs, but help this unit draw considerably less current than comparable fluorescent fixtures. Featuring an transparent polycarbonate lens, this high bay LED fixture provides maximum illumination while maintaining even and glare-free light distribution. The GAU-LEDTRF-2X2 is multi-voltage and operates on any voltage from 120V to 277V AC 50\/60hz.\r\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\r\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\r\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThe GAU-LEDTRF-2X2 is designed to be easy to install. The LED fixture simply lifts through a grid ceiling and rests directly on t-bars.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eHealthcare, property management, hospitality, residential, office, retail, schools, and data centers\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\r\u003cbr\u003eHigh Quality Features\r\u003cbr\u003eSuperior LED Benefits\r\u003cbr\u003e1. Low power consumption.\r\u003cbr\u003e2. Instant on\/off operation.\r\u003cbr\u003e3. Free of hazardous materials such as mercury.\r\u003cbr\u003e4. Superior color rendering.\r\u003cbr\u003e5. 50,000+ hours LED lamp life expectancy.\r\u003cbr\u003e6. Transparent polycarbonate lens.\r\u003cbr\u003e7. Glare-free uniform illumination.\r\u003cbr\u003e8. Low profile - Light weight.\r\u003cbr\u003e9. 3,500 Lumen output from 40 watts.\r\u003cbr\u003e1. 50,000+ hour lifespan.\r\u003cbr\u003e2. Can SAVE 50% or more on energy.\r\u003cbr\u003e3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.\r\u003cbr\u003e4. Reduces energy use and prolongs life-spans of peripheral cooling units (A\/C, refrigeration)\r\u003cbr\u003e5. 100% recyclable.\r\u003cbr\u003e6. No toxins-lead, mercury.\r\u003cbr\u003e7. No UV light, infrared radiation or CO2 emissions.\r\u003cbr\u003e8. Qualifies buildings for LED and other sustainable business certifications.\r\u003cbr\u003e9. Bright, even light maintains consistent color over time.\r\u003cbr\u003e10. Instant on\/off - No flickering, delays or buzzing.\r\u003cbr\u003e11. Very good color rendering.\r\u003cbr\u003e12. Vibration\/impact resistant.\r\u003cbr\u003e13. Significantly cooler operation.\r\u003cbr\u003e14. Less frequent outages, higher output improves workplace safety.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type: \u003cbr\u003eLED Light Dimensions:  23.62\"L x 23.62\"W x 5.53\"H\u003cbr\u003eWeight:  7.83 lbs\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e Universal- 120-277V AC, 50\/60Hz \u003cbr\u003eTotal Watts: 40W\u003cbr\u003eTotal Lumens:  3,500\u003cbr\u003eLuminous Efficacy:  87.5 Lm\/W\u003cbr\u003eLED Lamp Life Expectancy:   50,000+ Hours\u003cbr\u003eColor Temp: 3,500K, 4,000K, 5,000K \u003cbr\u003eBeam Angle:  160° Flood\u003cbr\u003ePower Factor:  \u0026gt;0.90\u003cbr\u003eOperating Temperature Range:  -20°C to +50°C\u003cbr\u003eHousing Material:  Aluminum\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eHousing Color:  White\u003cbr\u003eCRI:  \u0026gt; 80\u003cbr\u003eMounting:  2X2 Troffer - Rests directly on t-bars through grid ceiling \u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252891317,"sku":"PL3-GAU-LEDTRF-2X2","price":242.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-GAU-LEDTRF-2X2-1.jpg?v=1610917375"},{"product_id":"pl3-ind-trf-2x2-fuvc-ex-1l-v1-ms","title":"Larson 40W 2X2 Recessed Troffer Mount UV Sanitation Fixture - 120\/277V AC - (1) Far-UVC Excimer Lamp - Kill 99% of Viruses - Motion Sensor","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252924085,"sku":"PL3-IND-TRF-2X2-FUVC-EX-1L-V1-MS","price":8510.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRF-2X2-FUVC-EX-1L-V1-MS-1.jpg?v=1610917378"},{"product_id":"pl3-ind-trf-2x2-fuvc-ex-1l-v1","title":"Larson 40W 2X2 Recessed Troffer Mount UV Sanitation Fixture - 120\/277V AC - (1) Far-UVC Excimer Lamp - Kill 99% of Viruses","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252956853,"sku":"PL3-IND-TRF-2X2-FUVC-EX-1L-V1","price":7850.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRF-2X2-FUVC-EX-1L-V1-1.jpg?v=1610917379"},{"product_id":"pl3-ind-trf-1x2-fuvc-ex-1l-v1","title":"Larson 40W 1X2 Recessed Troffer Mount UV Sanitation Fixture - 120\/277V AC - (1) Far-UVC Excimer Lamp - Kills 99% of Viruses","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThis unit is Made In USA - Manufactured in Texas\r\u003cbr\u003eThe Larson Electronics IND-TRF-1X2-FUVC-EX-1L-V1 Recessed Troffer Mount Far-UV Sanitation Fixture disinfects 99% of viruses, bacteria, mold, and spores in large facilities. This eye and skin safe disinfection solution uses one 40-watt excimer lamp that emits far-UV 222 nm germicidal light. A single IND-TRF-1X2-FUVC-EX-1L-V1 unit can cover a maximum of 200 square feet, depending on the mounting height.\r\u003cbr\u003e*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. \r\r\u003cbr\u003e*\r\u003cbr\u003eThe IND-TRF-1X2-FUVC-EX-1L-V1 UV sanitation fixture is a 1-foot long by 2-foot wide, powerful lighting solution for general areas and commercial indoor spaces. This 40-watt troffer mount unit consists of one 40-watt excimer lamp that provides 222nm far UV-C output. Equipped with an expected lifespan of 10,000+ hours, the light emits a flood beam pattern. The housing on this sanitation unit is constructed of direct\/indirect formed cold rolled steel housing with a nanoceramic treatment for enhanced resistance to corrosion, and topped off with a flat white powder coat finish. This recessed troffer mount fixture also includes built-in earthquake brackets for resistance to violent vibrations.\r\u003cbr\u003eFar-UV 222 nm light is considered to be eye and skin safe for humans, allowing the lamps to be used in occupied areas safely with minimum risk. The 222 nm wavelength does not penetrate the cornea of the eye and cannot impose corneal impairment. Additionally, this UV band is blocked by the top layer of skin (stratum corneum) which protects underlying cells from damage. Exposure to far-UV 222 nm lamp does not cause skin inflammation or swelling. Due to these safety benefits, extensive protective clothing is not required when using this type of sanitation light in occupied areas.\r\u003cbr\u003eBenefits of Excimer Far UV Lamps:\r\u003cbr\u003eWhen it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide “instant-on” startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications.\r\u003cbr\u003eGermicidal excimer lamps emit far-UV 222 nm light that is generated by specific excimer molecules. The far-UV lights come with an expected lifespan of 10,000+ hours. This gas-filled emitter is energy efficient and offers cool operation. A power supply is typically utilized with the non-toxic lamp to ensure consistent UV output. The sanitation light, which is suitable for use in occupied areas, features instant start capabilities.\r\u003cbr\u003eMounting:\r\u003cbr\u003eThe low profile sanitation light allows operators to install it in shallow or compact spaces. This troffer mount UV-C germicidal fixture is for recessed mounting in 1' x 2' inverted T-Bar grid ceilings.\r\u003cbr\u003eNote on Environment:\r\u003cbr\u003eSunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.\r\u003cbr\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\r\u003cbr\u003eSanitation, disinfection, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers and more; kill 99% of viruses, bacteria, mold and spores.\r\u003cbr\u003eContact info@purilite.ca\r for more information about our custom options tailored to meet your specific industry needs.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eUnit Type: UV-C Germicidal Excimer Troffer Light\u003cbr\u003eLamp Technology: UV Excimer Sanitation\u003cbr\u003eLamp Qty: (1)\u003cbr\u003eDimensions:  1' x 2'\u003cbr\u003eWeight:  -\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e  120-277 V AC, 50\/60 Hz\u003cbr\u003eTotal Watts:  40W\u003cbr\u003eTotal UV-C Output:  -\u003cbr\u003eEffective UV Intensity:  40 uW\/cm2 @ 1.57\"\u003cbr\u003eExpected Lifespan:  10,000+ Hours\u003cbr\u003eUV Wavelength:  Far UV-C, 222nm\u003cbr\u003eMaximum Area Coverage:  200 Square Feet (Depending on Mounting Height)\u003cbr\u003eLamp Type:  UV-C Excimer\u003cbr\u003eLamp Base:  -\u003cbr\u003eReplacement Lamp:  FRL-EMX-6-40W-FUVC\u003cbr\u003eBeam Angle:  -\u003cbr\u003eLighting Configuration: Flood Pattern\u003cbr\u003ePower Factor:  -\u003cbr\u003eOperating Temperature Range:  -\u003cbr\u003eLamp Lens Material:  Quartz Glass\u003cbr\u003eHousing:  Cold Rolled Steel\u003cbr\u003eFinish:  Flat White Polyester Finish\u003cbr\u003eMounting:  1' x 2' Troffer in Inverted T-Bar Grid Ceiling\u003cbr\u003eCord:  -\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264252989621,"sku":"PL3-IND-TRF-1X2-FUVC-EX-1L-V1","price":7806.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRF-1X2-FUVC-EX-1L-V1-1.jpg?v=1610917381"},{"product_id":"pl3-ledeq-4x-ru-cpr","title":"Larson 40W LED Work Light Bar - Aluminum Housing - IP67 - Trunnion Mount Bracket - 9-64V DC","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003eThe LEDEQ-4X-RU-CPR from Larson Electronics is an LED Work Light Bar that is designed for heavy equipment use in demanding, industrial work sites, such as construction, mining, agricultural, shipping and commercial warehousing. This 40 watt fixture features ultra-bright CREE LEDs with a sturdy aluminum build and offers a wide spot beam configuration. The fixture is capable of withstanding rough treatment and immersions up to 3.3 feet (IP67 with air-breather design).\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003cbr\u003eThis LED light bar is capable of emitting up to 4,000 lumens during operation. The 40 watt fixture features 9-64V DC input voltages and an electric current of 3.33 A at 12V DC. During output, the luminary shines a brilliant white light with a color temperature rating of 6,000K. This unit comes with a 20` harness, 16\/2 wiring harness with a DT04-2S Deutsch connector and blunt cut end. The fixture`s long, 30,000+ hour lifespan and durable build makes it ideal for heavy duty applications.\n\u003cbr\u003eThe LED light bar`s housing is made up of aluminum, while the lens is constructed of polycarbonate. During installation, the luminary may be supported by a surface mount for extra stability. This unit complies with CE, ROHS and E4 standards. It is IP67 certified, which provides complete IP67 rated protection from dust and water immersions up to 3.3 feet. This lamp uses CREE LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These CREE LEDs generate a high, 100 lumens-per-watt ratio, effective lumen output and supports 70 percent lumen retention at 30,000 hours, giving them better efficiency and operational life than traditional light sources.\n\u003cbr\u003e\u003cstrong\u003eLED Benefits:\u003c\/strong\u003e\n\u003cbr\u003eUnlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and\/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.\n\u003cbr\u003eLED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.\n\u003cbr\u003eContact info@purilite.ca\n for more information about our custom options tailored to meet your specific industry needs.\n\u003cbr\u003eHigh Quality Features\n\u003cbr\u003eSuperior LED Benefits\n\u003cbr\u003e1. Low power consumption.\n\u003cbr\u003e1. 100,000 hour lifespan.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003eLamp Type:  LED Light Bar\u003cbr\u003eLED Type:  CREE LED\u003cbr\u003eDimensions:  13.39\"L x 3.90\"W x 5.83\"H\u003cbr\u003eInput \u003cstrong\u003eVoltage:\u003c\/strong\u003e  9-64V DC\u003cbr\u003eElectric Current:  3.33 Amps @ 12V DC, 1.67 Amps @ 24V DC\u003cbr\u003eTotal Watts:  40\u003cbr\u003eLumens:  4000\u003cbr\u003eLuminous Efficacy:  100 Lm\/W\u003cbr\u003eColor Temp:  6000K\u003cbr\u003eLamp Life: \u003cbr\u003eLighting Configuration:  Wide Spot Beam\u003cbr\u003eHousing Material:  Aluminum Alloy - Black Finish\u003cbr\u003eLens Material:  Polycarbonate\u003cbr\u003eMounting:  Surface Mount \u003cbr\u003eWiring:  20` Harness, 16\/2 Wiring Harness w\/ Deutsch Connector and Blunt End\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264253022389,"sku":"PL3-LEDEQ-4X-RU-CPR","price":592.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-LEDEQ-4X-RU-CPR-1.jpg?v=1610917384"},{"product_id":"pl3-ind-trf-ss-1x1-4l-uvc-t8-v1-120v","title":"Larson 40W 1X1 Recessed Troffer Mount Germicidal UV-C Fixture - 120\/277V AC - (3) T8 Fluorescent Lamps - Kills 99% of Viruses - 304 Stainless Steel","description":"","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264253087925,"sku":"PL3-IND-TRF-SS-1X1-4L-UVC-T8-V1-120V","price":2832.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRF-SS-1X1-4L-UVC-T8-V1-120V-1.jpg?v=1610917386"},{"product_id":"pl3-ind-trf-2x4-fuvc-ex-1l-v1","title":"Larson 40W 2X4 Recessed Troffer Mount UV Sanitation Fixture - 120\/277V AC - (1) Far-UVC Excimer Lamp - Kills 99% of Viruses","description":"\u003cstrong\u003ePuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.\u003c\/strong\u003e\u003cbr\u003e","brand":"Larson Electronics","offers":[{"title":"Default Title","offer_id":38264253120693,"sku":"PL3-IND-TRF-2X4-FUVC-EX-1L-V1","price":8114.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/products\/PL3-IND-TRF-2X4-FUVC-EX-1L-V1-1.jpg?v=1610917387"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/9553\/1701\/collections\/larson.jpg?v=1610911901","url":"https:\/\/shoppurilite.ca\/es\/collections\/larson-electronics.oembed?page=313","provider":"PuriLite","version":"1.0","type":"link"}