Battery-powered UV Sanitation Robot - Kills 99% of Viruses - 304 Stainless Steel, Base w/ Support Legs - Charge Station

LARSON ELECTRONICSSKU: PL3-IND-UC.360-RPS-R3-RBB-48-8L-UVC-V3-NR-1X
filler

Price:
Sale price$132,380.00

Description

Specifications / Additional Information
This unit is Made In USA - Manufactured in Texas
IND-UC.360-RPS-R3-RBB-48-8L-UVC-V3-NR-1X Industrial UV Sanitation Robot Ratings/Features
Lamp Technology: UV-C Fluorescent Short-wave Germicidal Light
Lamp Qty: (8) Kills 99% of Viruses and Other Germs
Cart Dimensions: 28.5"-W x 28.5"-D x 68"-H Cooling Fans
Weight: - Safety Kit Included
Charging Voltage: 120V AC, 50/60 Hz EPA Reg. No 98409-1
Total Watts: 960W EPA Est. No. 98409-TX-1
Single-lamp Watts: 120W  
Total UV Output: 212.8W  
Single-lamp UV Output: 26.6W  
Expected Lifespan: 8,000+ Hours
UV Wavelength: UV-C, 200nm - 280nm (254 nm)
Lamp Type: T8HO
Lamp Base: G13
Replacement Lamp: FRL-48-1X-T8HO-120W-UV-C
Beam Angle: 360°
Light Configuration: Flood
Delay: 1 Minute and 30 Seconds at Startup
Exposure Time: 30 Minutes Default
Maximum Treatment Time: 24 Hours
Safety Kit: (2) Safety Goggles, (4) Safety Signs
Amps: -  
Ambient Operating Temp: 80°F  
Materials: 304 Stainless Steel  
Lamp Protection: Wire Guard and Center Rail  
Mounting: Legs Special Orders - Requirements
Battery: 3,000aH Lithium-ion Battery
Runtime: 8 Hours
Charge Method: Charging Base
Cord: 15' 16/3 SOOW Cord w/ Cord Cap
Cord Cap: 5-15 Straight, L5-15 Twist or Pigtail
***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.***
' Product Overview '
function MM_openBrWindow(theURL,winName,features) { //v2.0 window.open(theURL,winName,features); }
This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-UC.360-RPS-R3-RBB-48-8L-UVC-V3-NR-1X UV Sanitation Robot kills 99% of viruses, bacteria, mold, and spores in large facilities, such as manufacturing sites and warehouses. This battery-powered UV cart offers UV-C output at a range of 200nm - 280nm (254nm) and comes equipped with eight UVC fluorescent lamps. The unit can be used with autonomous robots (sold separately) for transporting and deploying the sanitation cart around facilities without manual assistance. A charging base for the UV disinfection device is included. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The IND-UC.360-RPS-R3-RBB-48-8L-UVC-V3-NR-1X is a powerful sanitation solution for industrial sites and commercial facilities. Equipped with eight UVC fluorescent lamps, this UV cart offers output within the 200nm - 280nm UV-C range (254 nm). The lights have an expected lifespan of 8,000+ hours and emit a flood beam pattern. This UV system caters to 8,000 square feet of space with full, 360 degrees of coverage. Cooling fans below the lamps keep the unit running optimally. With a delay of 1 minute and 30 seconds at startup, this battery-powered UV cart can be deployed using a robot base (sold separately) in contaminated areas to minimize UV exposure risks.
Distance from Cart Irradiance/Second Exposure Time Required* Beam Width Beam Height
6 inch 4829.76 uW/cm2 8.7 seconds 2 ft 4 ft
12 inch 2426.11 uW/cm2 17.31 seconds 2.25 ft 4 ft
18 inch 1347.84 uW/cm2 31.16 seconds 2.5 ft 4 ft
2 foot 872.35 uW/cm2 48.15 seconds 3 ft 4 ft
3 foot 456.77 uW/cm2 1.5 minutes 4.5 ft 4 ft
4 foot 230.26 uW/cm2 3 minutes 6 ft 4 ft
5 foot 147.36 uW/cm2 4.75 minutes 7.5 ft 4 ft
6 foot 102.34 uW/cm2 7 minutes 9 ft 4 ft
7 foot 75.19 uW/cm2 9.5 minutes 10.5 ft 4 ft
8 foot 57.56 uW/cm2 12.5 minutes 12.25 ft 4 ft
9 foot 45.48 uW/cm2 16 minutes 13.5 ft 4 ft
10 foot 36.84 uW/cm2 19 minutes 15.25 ft 4 ft
12 foot 25.58 uW/cm2 28 minutes 18.5 ft 4 ft
15 foot 16.37 uW/cm2 43 minutes 23 ft 4 ft
18 foot 11.37 uW/cm2 62 minutes 27.5 ft 4 ft
20 foot 9.21 uW/cm2 76 minutes 30 ft 4 ft
*Exposure time is based off of total irradiance. The above calculations are based on 12mJ total exposure. This level of exposure deactivates most organisms.
The UV cart is made out of 304 stainless steel and features spring-loaded lamp sockets, which make it easier to switch out lamps. A wire guard protects the UV lamps from tampering or accidental bumping. Two safety goggles (not full face masks) and four safety signs (to warn individuals about ongoing UV sanitation) are included with the light. With a recommended 20-25 minute exposure time for viruses, multiple carts can be purchased to cover larger areas quicker. The UV light can disinfect over 99% of bacteria, viruses, mold, and spores. Battery Charging: With a 3,000 aH lithium-ion battery, each unit offers 8 hours of runtime on a full charge. Charging is facilitated by a charging base.
Click Photos to Enlarge
5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated Flying Leads / Pigtail Wires
Wiring/Plug: The charging base is equipped with 15 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy charging connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground or NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. UV Cart Mount: The UV cart is secured on a sturdy base with legs. The legs allow clearance for the robot (not included) to position itself under the unit before autonomous transportation. Slots at the bottom match up with the robot base before elevating the UV cart. Additionally, the legs protect the UV disinfection cart from dirty or wet floors. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Suggested Applications: Sanitation, disinfection, industrial, manufacturing, warehouses, storage buildings, processing sites and more; kills 99% of viruses, bacteria, mold, and spores.

Shipping and delivery Information

The PuriLite Peace of Mind 30-day money back guarantee

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed