Description
Specifications / Additional Information
ATEX-EXPCMR-IP-POE-4MP-IR Network Explosion Proof Camera | Ratings / Features |
Dimensions: 8"L x 6"W x 13"H | Listed for Europe & International |
Camera Weight: 8 lb, 7 lb w/o Bracket | Approved for Zone 1 & Zone 2 |
Total Watts: 5W (Max) | Approved for Zone 21 & Zone 22 |
Power Source: PoE (802.3af) | ATEX EX II 2 G |
Image Sensor: 1/3" Progressive Scan CMOS sensor | ATEX EX II 2 D |
Signal System: NTSC | IECEx Ex db IIC Gb IP66 |
Video Resolution: 4.0MP (2688*1520) | IECEx Ex tb IIIC Db IP66 |
Frame Rate: Up to 20fps @ 2688*1520 resolution | NEMA 3R, 4 |
Compression Type: H.264, H.264 OVC, MJPEG, H.265, H.265+ | NRTL Listed to EN 60079 |
Bit Rate: 32Kbps - 16Mbps | NRTL Listed to IEC 60079 |
Focal Length: 4mm | Capable of programming unique settings per stream |
Max Field of View: 83° | ONVIF Profile S Certified |
Shutter Speed: 1/3s to 1/10,000s | WDR (wide dynamic range) for auto adjusting |
Min. Illumination: 0.01 lux (Color) / 0 lux (w/ Built-in IR) | Main stream and two sub streams |
Infrared Light: Built-in | |
Day/Night: True D/N w/Mechanical Cut Filter | |
Digital Noise Reduction: 3D DNR | |
Ethernet Interface: RJ45 | |
Ethernet Speed: 10/100 | |
Protocols: TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP and more | |
Remote Configuration: Yes | |
Ambient Temperature Range: -22°F to +140°F | Special Orders - Requirements |
Housing Materials: Copper-free Aluminum Alloy | |
Lens Material: 3/8" Thick Tempered Glass | Toll Free: 1-800-369-6671 |
Mounting: Adjustable rear-mounted handle/bracket | Intl: 1-214-616-6180 |
Wiring Hub: (2) 3/4" NPT | |
Shipping Weight: 13 lb |
The ATEX-EXPCMR-IP-POE-4MP-IR Network Explosion Proof Camera from Larson Electronics is an ATEX / IECEX rated remote inspection camera specifically designed for observation in hazardous locations. This explosion proof, flameproof, dust/ignition proof, weather proof and tamper resistant camera provides the operator with a live feed from inside tanks, reactors, vessels or other hazardous locations. Equipped with built-in infrared, this remote inspection camera saves both time and money as well as contributing to workplace safety. Camera Features: The ATEX-EXPCMR-IP-POE-4MP-IR Network Flameproof Camera features a built-in 1/3" progressive-scan CMOS image sensor that delivers up to 4.0MP resolution at 20 fps. The wide angle fixed lens with 83° field of view is designed to cover large areas and work spaces. This explosion proof camera provides a crisp and clear image for everything within the 83° focal area. Total distance is dependent on mounting height and angle. The explosion proof unit comes with built-in infrared lights. For additional infrared illumination, an external infrared light can be used with the explosion proof device (not included). For 12-24V DC applications, we recommend the Larson Electronics 12-watt explosion surface-mount infrared LED light (). As an alternative, we also offer the for 120-240V AC applications This ATEX / IECEX remote inspection camera utilizes 120dB true Wide Dynamic Range, 3D Digital Noise Reduction and a true day/night IR-Cut Filter Removal to produce clear images in variable and low light conditions. The camera automatically switches from full color to IR mode when visible light falls below a certain level. Wiring: Link-up with the camera is achieved via a customer provided RJ45 Ethernet cable which is ran back to the customer provided DVR system mounted outside the hazardous location. Camera power is delivered via the same Ethernet cable using Power over Ethernet (PoE) technology. This not only increases flexibility in deployment, but also provides time and cost savings as well. Our flameproof cameras with Power over Ethernet (PoE) features enable data transfers and power to be passed through a single Ethernet cable that is usually a Cat 3/Cat 5 cable or better. There are several types of PoE, which come with their own respective standard and maximum power to port capabilities. The IEEE 802.3af PoE standard, with a voltage range of 44.0 - 57.0V, offers 15.4W of DC power for each port. The IEEE 802.3at PoE standard, with a voltage range of 50.0 – 57.0V, provides up to 30W of DC power per port, which is ideal for surveillance cameras, antennas and network access points. The IEEE 802.3bt PoE standard, with a voltage range of 50.0 – 57.0V, provides 60W of DC power for each port. In order to utilize PoE properly, the components, such as the receiving unit and sending device, must be PoE compliant. Recording: To record the stream from this camera, a NVR (network video recorder) is required. Larson Electronics provides a line of explosion proof, hazardous location, and non-classified NVR`s to work in conjunction with this explosion proof camera. This camera is live-view capable without any NVR system via remote access to the camera. Three streams are available, one main stream for recording and two sub streams for live viewing or additional resources. Each steam can be configured to different resolutions and frame rates. Mounting: The ATEX-EXPCMR-IP-POE-4MP-IR Network Explosion Proof Camera features an ATEX/IECEx certified copper-free aluminum alloy body and weighs a total of 6 pounds. The camera includes an adjustable rear-mounted polished stainless steel mounting bracket/handle. Additional accessory pole mounts and magnetic mounts are available separately. Applications: Vessel, tank and reactor monitoring, remote observation of external facilities, monitoring of cleaning, spray patterns, mixing, foaming, reaction, and level. |
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.