Description
Specifications / Additional Information
EXPCMR-SS-IP-POE-4MP-IR Network Explosion Proof Camera | Quick Summary |
Dimensions: 8"L x 6"W x 13"H | Class I, Divisions 1 & 2, Groups B, C, D |
Camera Weight: 6 lb | Class I, Zones 1 & 2, Groups IIB+H2, IIA |
Total Watts: 5W (Max) | Class II, Divisions 1 & 2, Groups E, F, G |
Power Source: PoE (802.3af) | Class III, Divisions 1 & 2 |
Image Sensor: 1/3" Progressive Scan CMOS sensor | Ex db IIC Gb |
Signal System: NTSC | Ex tb IIC Gb Db IP66 |
Video Resolution: 5.0MP (2560 × 1920) | NEMA 3, 4, 4X, 7 (B, C, D), 9 (E, F, G) |
Frame Rate: 5MP @ 20 fps; 2560 x 1440 @ 30 fps | |
Compression Type: H.265+, H.265, H.264 OVC, H.264, MJPEG | |
Bit Rate: 32Kbps - 16Mbps | |
Focal Length: 4mm | |
Max Field of View: 83° | |
Shutter Speed: 1/3s to 1/10,000s | |
Min. Illumination: 0.01 lux (Color) / 0 lux (IR) | |
IR Range: 120 ft | |
Day/Night: True D/N w/Mechanical Cut Filter | |
Digital Noise Reduction: 3D DNR | |
Ethernet Interface: RJ45 | |
Ethernet Speed: 10/100 | |
Protocols: TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP and more | |
Remote Configuration: Yes | Special Orders/Requirements |
Ambient Temperature Range: -22°F to +140°F | |
Housing Materials: Cast 316 Stainless Steel Housing | Toll Free: 1-800-369-6671 |
Lens Material: 3/8" thick Tempered Glass | Intl: 1-214-616-6180 |
Mounting: Adjustable 304 Stainless Steel Rear-mounted Handle/Bracket and Set Screws | |
Wiring Hub: (2) 3/4" NPT |
The EXPCMR-SS-IP-POE-4MP-IR Stainless Steel Explosion Proof Network Camera from Larson Electronics is a remote inspection camera specifically designed for observation in hazardous locations. This explosion proof, dust/ignition proof, weather proof and tamper resistant camera provides the operator with a live feed from inside tanks, reactors, vessels or other hazardous locations. The unit features an all stainless steel housing (cast 316 stainless steel), adjustable mounting bracket (304 stainless steel), hardware and set screws. Operated remotely from a centralized control room, this remote inspection camera saves both time and money as well as contributing to workplace safety. Camera Features: The EXPCMR-SS-IP-POE-4MP-IR Network Explosion Proof Camera features a built-in 1/3" progressive-scan CMOS image sensor that delivers up to 5.0MP resolution at 20 fps. The wide angle fixed lens with 83° field of view covers a large area, and an integrated IR LED array provides the operator with low light and nighttime visibility up to 120`. The camera automatically switches from full color to IR mode when visible light falls below a certain level. This remote inspection camera utilizes Advanced Infrared Technology, 120dB true Wide Dynamic Range, 3D Digital Noise Reduction and a true day/night IR-Cut filter Removal to produce clear images in variable and low light conditions. This explosion proof camera provides a crisp and clear image for everything within the 83° focal area. Total distance is dependent on mounting height and angle. Wiring: Link-up with the camera is achieved via a customer provided RJ45 Ethernet cable which is ran back to the customer provided DVR system mounted outside the hazardous location. Camera power is delivered via the same Ethernet cable using Power over Ethernet (PoE) technology. This not only increases flexibility in deployment, but also provides time and cost savings as well. Our explosion proof cameras with Power over Ethernet (PoE) features enable data transfers and power to be passed through a single Ethernet cable that is usually a Cat 3/Cat 5 cable or better. There are several types of PoE, which come with their own respective standard and maximum power to port capabilities. The IEEE 802.3af PoE standard, with a voltage range of 44.0 - 57.0V, offers 15.4W of DC power for each port. The IEEE 802.3at PoE standard, with a voltage range of 50.0 – 57.0V, provides up to 30W of DC power per port, which is ideal for surveillance cameras, antennas and network access points. The IEEE 802.3bt PoE standard, with a voltage range of 50.0 – 57.0V, provides 60W of DC power for each port. In order to utilize PoE properly, the components, such as the receiving unit and sending device, must be PoE compliant. Recording: To record the stream from this camera, a NVR (network video recorder) is required. Larson Electronics provides a line of explosion proof, hazardous location, and non-classified NVR`s to work in conjunction with this explosion proof camera. This camera is live-view capable without any NVR system via remote access to the camera. Mounting: The EXPCMR-SS-IP-POE-4MP-IR Network Explosion Proof Camera features a cast 316 stainless steel housing/body and weighs a total of 6 pounds. The camera includes an adjustable rear-mounted polished 304 stainless steel mounting bracket/handle and set screws. Additional accessory pole mounts and magnetic mounts are available separately. Applications: Vessel, tank and reactor monitoring, remote observation of external facilities, monitoring of cleaning, spray patterns, mixing, foaming, reaction, and level. |
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.