Description
Specifications / Additional Information
MPD-SB09-CLP6.400AB-SZ0SZ-ZZ-6.C04-M1 Portable Power Distribution | Ratings |
Line-In: (1 Set) 16 Series Female Camlocks w/ Covers [Red, Black, White, Green] | Certified for United States & Canada |
Line-Out: (1 Set) 16 Series Male Camlocks [Red, Black, White, Green] - Feed Thru, 400 A Maximum | NRTL Listed to UL 508A |
Primary Voltage: 208Y | NRTL Listed to UL 1640 |
System Amps: 300 A | NRTL Listed to CSA C22.2 No. 14 |
Secondary Voltage: 208V AC | |
Secondary Breakers: (6) 50 A 2P MCB [250 V] | |
Secondary Receptacles: (6) CS6369 California Standard Twist-Lock [125/250 V] | Special Orders - Requirements |
Power Monitoring: Power Indicator Lights (Input Camlocks), Power Meter LCD Monitor | |
Form Factor: Blue Powder Coated Steel Cube w/ Casters | |
Frame Materials: Powder Coated Steel Frame and Walls | |
Dimensions: - | |
Weight: - | |
Larson Electronics manufactures a wide variety of custom power distribution systems. The pictures displayed for this unit are a general representation of form factor and may not accurately represent this exact configuration in every detail due to being custom builds. The specifics for this configuration are listed in the specification table and one-line diagram. | *All grounding shall comply with state and local codes and meet the minimum requirements of the National Electronic Code section 250* |
This unit is Made In USA - Manufactured in Texas The MPD-SB09-CLP6.400AB-SZ0SZ-ZZ-6.C04-M1 from Larson Electronics is a Portable Power Distribution System that is designed for stages, movie sets, concerts, and entertainment sites. This mobile power distribution unit provides operators the ability to safely tap into and distribute 208Y power from a variety of sources, including generators and direct grid power, found in motion picture production. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO POWER DISTRIBUTION PANELS, TRANSFORMERS, OR SUBSTATIONS* Portable Power Distribution Purpose and Use: The MPD-SB09-CLP6.400AB-SZ0SZ-ZZ-6.C04-M1 portable power distribution system gives operators the ability to power their 208 volt equipment from a single system within live recording and entertainment venues. An accessible LCD monitor at the top of the unit allows highly visible monitoring of power usage and allocation during use. From equipment testing to live recording sets, these portable stations make power at busy production sites readily available and safe to use. On the primary side, operators connect 208Y line-in power using one set of 16 series female camlock inputs with covers (red, black, white and green) and to one set of 16 series male camlock outputs (red, black, white and green) for feed-through operation. The secondary side contains six CS6369 output receptacles for 208V equipment that are protected by six 50-amp 2-pole MCB 250 V breakers. Operation: One set of 16 series female camlock inputs with covers (red, black, white and green) brings 208Y into the primary side of the 200-amp mobile power distribution unit, which contains one set of 400-amp maximum 16 series male camlock outputs for feed-through operation. The secondary side is equipped with six 50-amp 2-pole MCB 250 V breakers protecting six CS6369 California Standard Twist-Lock receptacles. Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this powder coated unit is fully enclosed and designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The system is accessible via two doors at each end for access to breakers on the panels and a center-located door for access to receptacles. The model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customerâ„¢s needs. Larger units are available upon request and can be equipped with skids or trailer mounted. Certification: All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request. Applications: This power distribution system is ideal for indoor or outdoor use and applications including but not limited to, movie sets, entertainment, television sets, stage lighting, studio recording, sporting events, rigging, audio and video production, concerts and motion picture production. These power distribution systems are popularly used in applications where external power sources are often necessary. We also offer class rated transformers for use within explosion proof and hazardous location environments. Custom Built Systems Available: Larson Electronics is a manufacturer and we can build portable power distribution systems to your specifications. Although we carry several models of portable power distribution systems in stock, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us at 1-800-369-6671 or to discuss your specific requirements. |
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recently viewed
Save 24%
Elo
Elo i2 I-Series POS Terminal - Intel Celeron 1.50 GHz - 4 GB DDR4 SDRAM - 128 GB SSD M.2/SATA - Windows 10 IoT Enterprise
Sale price$1,607.99
Regular price$2,119.54