Description
Specifications / Additional Information
This unit is Made In USA - Manufactured in Texas
IND-MER-LP-SS-48-2L-UVC Medical UVC Fixture | Ratings/Approvals |
Listing: - | (2) 4` UV Fluorescent Lamps |
Lamp Technology: UV Fluorescent | Germicide Applications |
Lamp Quantity: (2) | Produces NO Ozone |
Lamp Dimensions: 48" x 1" | Shatter Proof Bulbs |
Weight: - | EPA Reg. No 98409-1 |
Voltage: 120-277V AC | EPA Est. No. 98409-TX-1 |
Frequency: 50/60 Hz | Â |
Total Watts: 240W | Â |
Single-lamp Watts: 120W | Â |
Total UV Output (Watts): 53.2W | Â |
Single-lamp UV Output (Watts): 26.6W | Â |
Total Radiant Intensity: 480 µW/cm² @ 1 Meter |  |
Single-lamp Irradiance: 240 µW/cm² @ 1 Meter |  |
Luminous Efficacy: - | Â |
Lamp Life: 8,000 Hours | Â |
UV Band: UVC 254nm (200nm - 280nm) | Â |
Peak Wavelength: 280nm | Â |
Color Temperature: - | Â |
Color Rendering Index: - | Â |
Lamp Type: UV T8HO Fluorescent, Shatterproof | Â |
Lamp Base: G13 (Medium Bi-Pin Fluorescent) | Â |
Replacement Lamp: FRL-48-1X-T8HO-120W-UV-C-SPF | Â |
Beam Angle: 360° |  |
Lighting Configuration: Flood Pattern | |
Power Efficiency: - | |
Power Factor: - | |
Ballast Quantity: 1 | |
Ballast Voltage: 120-277V AC, 50/60 Hz | |
Amps: 2A @ 120V, 1A @ 240V, 0.86A @ 277V | Â |
Operating Temp Range: - | |
Housing Material: 304 Stainless Steel | |
Hardware/Hub Material: Zinc Coated Hubs | |
Mounting: Side Mounted L-brackets | |
Hub Quantity: (2) | |
Wiring Hub Size: 1/2" or 3/4" Threaded | |
***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.*** |
This unit is Made In USA - Manufactured in Texas The Larson Electronics IND-MER-LP-SS-48-2L-UVC UV Fluorescent Fixture provides UVC illumination for sanitation in medical locations. This 240-watt unit features two, 4-foot fluorescent lamps that offer 254 nm germicidal UV-C light. The luminary caters to side-mounting installations and operates on 120-277V AC, 50/60 Hz. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The IND-MER-LP-SS-48-2L-UVC is a fluorescent-based UV lighting system for medical facilities, including emergency rooms and dentist areas. Consisting of two, 48" fluorescent UV lamps, the 240-watt unit offers 254nm UVC output with a wavelength range of 200nm to 280nm. Radiant intensity is 240 uW/cm2 per lamp. This UV fixture operates on 120-277V AC, 50/60 Hz (ballast voltage) and features a G13 medium bi-pin cap base. The UV lamps contain an 8,000-hour useful lifespan. This UV system DOES NOT produce ozone. The UV light's housing is constructed of 304 stainless steel, with zinc-coated hubs. A durable PEF coating makes the lamps shatter resistant and provides protection from impacts. Should the bulb break during an emergency, the internal contents and glass will remain trapped inside the unit. This coating adds an extra layer of safety for workers and customers alike. UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility. Mounting/Wiring: The IND-MER-LP-SS-48-2L-UVC features a side mounting system. L-brackets on the housing facilitate a low profile side mount, making it suitable for installations in tight spaces. Power connections to the UV unit can be completed via two accessible, threaded wiring hubs (1/2" or 3/4"). Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Applications: Germicidal, medical, dentists, emergency rooms, healthcare, water purification, disinfection, food processing, air disinfection, pharmaceuticals, biotechnology and more. |
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
You may also like
Save 16%
LARSON ELECTRONICS
120V Dimmer Switch for LED Light Fixtures - 800 Watt Rated - Electro-Mechanical Slider Switch
Sale price$1,599.99
Regular price$1,899.00
Save 23%
LARSON ELECTRONICS
1-Phase Buck/Boost Step-Down Prewired Transformer - 240V Primary - 220V Secondary - 45.87 Amps - 50/60Hz
Sale price$4,542.64
Regular price$5,884.92