1.2 kW Solar Light Tower - 30' Light Tower, 7.5' Trailer - (4) LED Lamps - (4) 250aH 12V AGM Deep Cycle Batt. - Wind Gen

LARSON ELECTRONICSSKU: PL3-SPLT-1.2K-LM30-4XWP600E-WG-AT-BC.120V-M2
filler

Price:
Sale price$91,374.00
 更多支付选项

Description

Specifications / Additional Information
SPLT-1.2K-LM30-4XWP600E-WG-AT-BC.120V-M2 Trailer Mounted 5-Stage Light Tower Quick Summary
Light Mast Specs Certified to United States & Canada Standards
Tower Length: 13.5` to 30` NRTL Listed to UL 508A 
Mast Head Length: 44" NRTL Listed to CSA C22.2 No. 14
Stages: 5 Engineered for 7-day/week Operation
Winch Type: Manual Crank 13.5` to 30` Light Mast
Materials: Steel Steel Construction
Finish: Powder Coated - Gloss Blue Powder Coated Finish
Operation: (1) 1,000lbs Hand Winch Removable Mast Head
Cable: 3/16" Galvanized Aircraft Cable (4) 1,000lb Outriggers
  125 mph Wind Resistance
Solar Panel/Battery Bank Specs Manual or Optional Electric Operation
Panes: (4) 300W Panels (4) 300W Solar Panels w/ Sliders
Method of Deployment: Slider Fully Solar, No Fuel Needed
System Voltage: 12 Volts Waterproof/Vapor Proof Lamps
Battery Bank: (4) 250aH 12V AGM Deep Cycle Batteries 50,000+ Hour LED Life
Battery Capacity: 1000aH Total / 500aH Usable Lamps ETL Approved for Wet Locations
Battery Charger: 30A, 120V AC IP68 Waterproof Lamps
Battery Charger Duration: < 24 Hours from Dead to Full Battery Battery Charger
Battery Charger Cord: 15' 10/3 SOOW Cord w/ L5-30P Auto Timer for Lights
  Dusk/Dawn Sensor for Lights
Charge Controller Specs AGM Deep Cycle Battery Bank
Solar, Load, or Diversion Current: 45A Meets DOT Height Requirements
Voltage Range: 12-48V Street Legal Trailer
Minimum Voltage: 9V License Plate Holder and Lights
Maximum Solar Voltage: 125V Temperature Controlled Cooling Fans in Solar Control Box
Protection: Reverse Polarity, Short Circuit, Over Current, High Temperature and Over Voltage (2) Locking Points on Solar Control Box
   
Wind Generator Specs  
Rotors: (3)  
Rotor Diameter: 5.57'  
Rated Power: 1,200W  
Rated Speed: 14 M/S  
Starting Wind Speed: 6 MPH  
Survival Wind Speed: 110 MPH  
Materials:  Polypropylene and Fiber Glass  
Sound: 40dB @ 32.8'  
 
LED Lamp Specs
Lamp Type: CREE LED
Lamp Qty: (4)
Total Watts: 240W
Single-lamp Watts: 60W
Total Lumens: 21,600
Single-lamp Lumens: 5,400
Luminous Efficacy: 90 lm/w
LED Life Expectancy: 50,000+ hours
Color Temp: 5600K, 4000K, or 3000K
Color Rendering Index: 80
Beam Angle: 60° Vertical, 75° Horizontal
Lighting Configuration: Flood Beam
Ambient Temp Range: -25°C to +60°
Lamp Housing Material: Cast Aluminum
Lamp Lens Material: Polycarbonate
Mount: Tower w/ Adjustable Tilt/Rotation
Sensor: Dusk/Dawn Sensor Activated When Light Levels Drop Below 5fc
Timer Type: Automatic Schedule Timer
Operating Modes (Internal Switch): Dusk/Dawn Sensor, Automatic Schedule Timer, Manual On/Off for Overriding Sensors/Timers
Mount: Tower w/ Adjustable Tilt/Rotation
   
Trailer Specs
Materials: Steel
Trailer Dimensions: 7.5`L` x 7`W Trailer Bed - 10.75` Total Length
Hitch: 2" Ball Coupler
Wiring: 7-Pin Flat
Axle: 3,500lb
Tongue Jack: 1,000 lb w/ Wheel
Transportation Assist: 4-corner D-rings
Suspension: 3,500 Lb 4-Leaf Double Eye Springs
Leveling Jacks: Adjustable
Wheels: (2) 15" 5x4.5 Steel Rims
Tires: ST205/75/D15 H188
Towing Weight: 2,000 lbs
Shipping: Common Freight Toll Free: 1-800-369-6671
Shipping Dimensions: 8`-L x 8`-W x 12`-H Intl: 1-214-616-6180
Shipping Weight: +-600 lbs
Options: Length- Mounting-Fixtures/ Call Us for Special Requirements
' Product Overview '
Made in the USA The Larson Electronics SPLT-1.2K-LM30-4XWP600E-WG-AT-BC.120V-M2 Solar Powered LED Light Tower provides a safe and effective way for operators to quickly deploy 240 watts of intense LED illumination to elevations up to thirty feet. Designed for 7-day/week operation, this solar light plant features a telescoping light tower, a rotating boom that allows for 360° rotation and a removable mast head for storing the four LED light fixtures when not in use. The unit has four 300-watt solar panels supported by an AGM deep cycle battery bank with 50% discharge capacity and a wind generator. The entire assembly is mounted onto a 7.5` single-axle trailer that is street legal and meets DOT height requirements, allowing operators to transport this solar light tower from location to location. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO LIGHT MASTS OR LIGHT TOWERS* Solar Powered Light Tower: This solar light tower includes four solar panels, solar charging system, wind generator, AGM deep cycle battery bank, battery charger, dusk/dawn sensor, auto timer and a manual crank up mast mounted on a trailer with adjustable leveling jacks. The 1.2 kW solar generator system replenishes amp hours of usable battery capacity per day, assuming 5.5 hours of peak charging sunlight. This system delivers 12 volts for lighting mounted atop the 30` telescoping light mast. A battery charger provides flexibility during deployment, which allows operators to supply power to the batteries using an external 120V power source. This feature is useful for fast turnaround projects, sustaining extended periods of illumination and remote sites that lack adequate exposure to sunlight. Light Mast: This telescoping five stage steel light mast from Larson Electronics is designed to allow operators to quickly and safely deploy the four LED light heads and a wind generator in locations where this equipment must be elevated to heights up to 30` for effective coverage. This light boom can be extended to 30` above the trailer floor for maximum area coverage, and collapsed to 13.5` for applications where a smaller footprint is required. The tower is constructed of square steel tubing with a base section 6.6` in length and 6" by 6" by 3/16" thick, lower section 6.78` in length and 5" by 5" by 3/16" thick, middle section 6.93` in length and 4" by 4" by 1/8" thick, upper section 7.08` in length and 3" by 3" by 1/8" thick, and top section 7.58` in length and 2" by 2" by 1/8" thick. Each section has a 1`+ overlap. The mast is extended to its full height using an included 1,000lb rated hand winch with 3/16" galvanized steel cable. A 44" wide and 2" by 2" by 1/4" thick mounting plate is attached to the upper section of the mast which provides a strong and stable platform for the equipped LED light fixtures and wind generator. When elevated to its full upright position, the mast can be rotated a full 360°. By loosening the T-Handle, operators can rotate the mast with easy in either direction. The mast can be positioned in one of four different positions, and locked back in place by re-tightening the T-handle. The mast itself spins freely with easy, and can typically be rotated with a single hand. The LM series of towers are powder coated with glossy blue finish for corrosion resistance and aesthetics. The LM family of telescoping towers feature a proprietary mast guidance system, which provide increased stability during high winds. When lowered to 13.5`, the mast can withstand winds up to 125 mph. Custom builds can be provided for higher wind speed resistance when fully raised.
44" Mast Head for mounting lights and equipment
Click Image to Enlarge
LED Light Fixtures: This solar light plant is equipped with four Larson Electronics LEDWP-600 high output LED light fixtures. The LEDWP-600 consists of six 10 watt LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. Mounting hardware for the LEDWP-600 consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted (dark sky cutoff glare shields available on request). LED Technology: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Lamp Control: Each lamp can be powered on individually, allowing operators to power one lamp or all four lamps at a single time to fit the required illumination requirements. An equipped dusk-to-dawn day/night sensor allows for automated operation of the light configuration set within the control center. Operators may also set a time/duration for light activation using the built-in auto timer feature.
Images Below Show Light Tower Lowered and Raised to 30ft.
Click Images to Enlarge
Lamps Off (Ambient Light) (4) 60 Watt LED Lamps Turned On Illuminating Wall 200ft. Away (20,000+sq.ft. area)
Area from Above
Solar Panel Assembly: This unit is comprised of four 300-watt solar panels, generating a total maximum output of 1.2 kW. The panels are mounted securely on a sliding assembly. During deployment, the top solar panels slide out to form a four-panel array for maximum exposure to sunlight. The panels are wired to the solar charger control box which manages the charging system. When in use, the four solar panels are angled at 45° to capture the intensity of the sun for optimized light intake. Battery Bank: The solar light tower contains four 250aH 12V AGM deep cycle batteries (500aH total battery bank). These batteries offer 50% discharge capacity. Charging is monitored by a 45-amp MPPT charge controller (40A and 50A available upon request). This component maximizes the charging process and offers the following protective features: reverse polarity, short circuit, over current, high temperature and over voltage. An included 30-amp battery charger with a 15' 10/3 SOOW cord and L5-30 plug can be used to fully recharge batteries using 120V AC power sources (120/240V and 240V chargers available upon request). Charging takes approximately < 24 hours from a completely dead state to full. Wind Generator: An included 1.2kW wind turbine generates power when outdoor conditions exceed 6 mph. Equipped with three fiber glass rotors, the unit is resistant to harsh weather, UV rays, heavy rain and up to level 3 hurricanes. At a distance of 32.8', the wind turbine generates 40dB of noise. Component Control Center: All the electrical components are encapsulated in a NEMA 3R job box that is bolted to the trailer. Since most of these components are not rated for high heat, our component cooling system circulates air within the job box at 1400 CFM when the ambient temperature exceeds 90 degrees Fahrenheit. The job box that contains the component control system includes two locking points for security purposes. Trailer Assembly: The entire assembly is mounted to a 7.5` by 7`, single axle trailer via six 1/2" anchor bolts. The two-wheel trailer is equipped with 3,500 lbs axle and leaf springs with 15" trailer tires. A standard 2" ball coupling, two standard safety chains, and 7-pin flat trailer plug allow for easy hookup and towing. NATO pintle hitch available upon request. 4-corner D-rings are available for securing the trailer during transport (flatbed, container or ship) or for crane picking. The trailer tongue can be removed for long-term deployment. A rugged and waterproof job box is included, safely secured to the trailer. Adjustable leveling jacks provide stabilization during deployment. All trailer lighting complies with DOT/FMVSS regulations. This trailer is street legal and comes with a license plate holder and license plate lights. Applications: Remote work locations, construction sites, military bases, camping sites, outdoor events, security applications, emergency services, outdoor lighting, portable lighting and more. Summary: Solar Systems
  • Fully independent solar system, with all system components mounted on a single street legal trailer that meets DOT height requirements. Capable of 7-day/week operation.
  • Solar system components: four solar panels with charge controller, wind generator, AGM deep cycle battery bank with 100% discharge capacity, four outdoor LED lights with dusk/dawn sensor and automatic timer, and solar charge box with temperature controlled cooling fans and (2) locking points.
  • Total deployment can be completed by one person in under 30 minutes.
Renewable Energy Power Generation
  • Four, 300-watt solar panels (1.2kW total)
  • Solar panels mounted on sliders (transport mode has two stacks of panels)
  • Quick, sliding solar panel deployment
  • 1.2kW wind generator
  • Wind generator starts generating power at 6 MPH
  • Wind generator sound: 40dB @ 32.8'
  • Wind generator withstands harsh weather, UV rays, heavy rain and up to level 3 hurricanes
Automated Light Timer/Charge Control Module
  • 45A MPPT charge controller to maximize battery charging
  • Solar charge controller protection: reverse polarity, short circuit, over current, high temperature and over voltage
  • Automatic schedule timer for LED lights enables setting schedules for specific on/off light operation requirements
  • Dusk/dawn sensor turns lights on/off when ambient light levels drop below 5 footcandles
  • Internal switch to select from the following operating modes: dusk/dawn sensor, automatic schedule timer or manual on/off for overriding sensor and automatic schedule timer
  • Solar control box with temperature controlled cooling fans protect equipment in hot weather; (2) locking points on box deters tampering with customer-provided pad locks
Power Storage
  • (4) 250aH 12V AGM deep cycle batteries - 500aH total battery bank
  • 50% discharge capacity
  • 12V battery system
  • 30A 120V AC battery charger with 15' 10/3 SOOW cord and L5-30 plug that is capable of fully recharging batteries from a completely dead state to full in <24 hours using common 120V AC power sources
Trailer and Housing
  • Meets DOT height requirements without folding over tower for clearing bridges and overhead structures; reduces deployment time
  • Street legal trailer; includes trailer lights, license plate holder and license plate lights
  • 7-pin trailer plug for connecting to common tow vehicles
  • Adjustable leveling jacks
  • 4-corner D-rings for securing trailer during transport (flatbed, container and ship) or for crane picking
  • Standard 2" ball hitch
  • 1000 lb tongue jack w/ wheel
  • Towing weight - 2,000 lbs
  • Heavy-duty steel construction
Light Tower
  • 13.5' to 30' adjustable steel mast with durable powder coated finish
  • 5 stages
  • Manual crank deployment
  • Removable mast head
LED Lights
  • (4) 60W high intensity outdoor LED lights
  • 21,600 total lumens
  • Solid-state, energy efficient with 50,000+ hours expected lifespan
  • Flood beam configuration
  • IP68 waterproof, impact/vibration resistant construction
  • Adjustable tilt/rotation

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed

Nec NP-UM352W LCD 3500L PROJ RJ-45 12.4LBS W/20W SPEAKER