Motorized remote control spotlight with 50 Watt High Intensity Discharge (HID) light, magnetic base and 16 foot coil cord with cigarette plug. This remote controlled work light produces 4500 lumens and produces a high powered spotlight beam to 4,100 feet. Alternatively, this HID light can be configured with a flood lens, producing a soft, wide beam covering an area 425 feet in width and length.
The RCL360-HID-RF-M is a remote controlled, industrial grade HID spotlight, producing 4500 lumens (equivalent to 1,000,000 industrial candlepower rating and a 15 million retail candlepower rating). This remote controlled HID spotlight produces an 4100 foot beam with a 50 watt HID bulb and ballast combination. This motorized spotlight is controlled via a handheld wireless remote control that offers 4 directional buttons and an on/off switch for the light beam itself. The two 200 pound grip magnetic bases hold the light securely to any ferrous metal surface even at driving speeds. The detachable 16 foot coil cord with cigarette plug brings power to the light.
A key feature of this remote control spotlight is the "up and over" capability. Unlike most remote control lights, this light can be used to point straight upwards while maintaining full beam width. This light can also point nearly directly downward, limited only by the very narrow base. Basically, this remote controlled light offers a complete range of coverage, due to its unique "yolk" based designed.
Another unique aspect of this light is that the light can be moved in two directions simultaneously. Most remote controlled spotlights can be right and left or up and down independently. This light can be moved at angles. For example, you can move the light down and to the right at the same time. This enables the operator to position the light very easily on even the smallest target. This can be helpful to driving and spotting at the same time. To some extent, this light embodies the finite controls afforded the operator by pillar mount spotlights with the wireless handheld remote control.
MADE IN THE USA. Certificate of origination provided on request. NAFTA compliant.
MOTORIZED TILT AND ROTATION
Electric motors control full horizontal and vertical light movement via a wireless remote controller that can be used anywhere in the vehicle, boat or heavy equipment. This remote control light uses "slip drive" motors, which enables the operator to position the light by hand if they choose without causing damage to the motors. This feature also protects the motors and gear is the light hits a tree branch or other obstacle.
LIGHT BEAM OPTIONS
This HID light can be configured for a spotlight or flood light configuration. Please select below under beam options for spotlight or flood light. The 50 watt HID bulb produces 4500 lumens, which is equivalent to a 1,000,000 industrial candlepower rating and a 20 million retail candlepower rating. In a flood beam configuration, this light casts a 425 foot by 425 foot beam. In a spot beam configuration, this HID light casts a 4100 foot beam that is 255 feet at its widest point. The difference between the spot and flood configuration is based on the use of different lens/reflector combinations to either let the light pass directly outward for distance (spot) or diffuse the light for a wider, softer beam (flood).
This image shows a dark suburban street, illuminated by nothing but distant street lights.
This image shows the same street, this time being illuminated by the RCL360-HID; the beam easily breaks through the distant street lights to illuminate the trees over 2900` away. The beam is show reflecting off a guard rail over 4500` away from the camera point of origin.
ENVIRONMENT
Weather-resistant light and base provides safe, dependable operation in the most demanding environments including fresh water and salt water marine use. The weather resistant properties are due to the UV resistant housing materials and the individually potted and sealed electrical components. The motors, board controllers, ballast and other components are completely potted and sealed and connected via weatherproof connections. All support materials are Delrin, stainless steel, polycarbonate or brass. Saltwater is not an issue. The light can be exposed to waves, rain and other water sources under high wind conditions. The light can be temporarily submerged.
VOLTAGE
Available in 12-24 volts DC.
WIRELESS REMOTE CONTROL FOR SPOTLIGHT
Wireless remote control enables the operator of this wireless remote controlled spotlight to turn the beam on and off, and control the direction with 4 directional buttons. The light moves as the buttons are depressed. The light stops and holds position when the buttons are released. The remote is easily held in the hand, operated easily with a gloved hand and is weatherproof.
MOUNTING and WIRING
A detachable 16 foot coil cord with heavy duty cigarette plug brings power to the spotlight. Two 200lb. grip magnets allow the operator to mount and dismount the light easily to any ferrous metal surface. This magnetic base is designed to hold the light to the vehicle even at highway speeds. Additional shock absorbing materials buffer the magnetic base and the light, increasing the light`s ability to contuor to slightly uneven or curved surfaces more effectively.
This spotlight can be mounted right side up, upside down or at any angle without concern for water intrusion, etc.
Materials:
Stainless steel and Delrin.
All internal moving components are made from stainless steel and Delrin (acetal copolymer). The motor assemblies, shafts, brackets and other structural items are made from stainless steel, while the gears are made from a self lubricating grade of Delrin (acetal copolymer). Delrin is a unique resin designed by Dupont and is commonly used as an alternative to steel in applications where saltwater, chemicals and high heat are an issue. Delrin is chemical resistant, oil resistant, saltwater resistant and maintains its properties in sub zero temperatures (-40 C) and temperatures well over 200 degrees C. These materials are chosen for their ability to provide long lasting durability in inclement environments, making this remote controlled light an ideal solution for mining, oilfield and saltwater applications. The housing is made from UV resistant polycarbonate with a brass back plate for support.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Return & Refund Policy
For All non-Larson Products If you are not satisfied with a product, contact us by emailing or call 1-844-787-LITE within 30 days of receipt. A refund may be arranged excluding freight charges upon inspection. Returned merchandise must be shipped in original packaging, freight prepaid, unused, and in resalable condition, and are subject to 25% restocking fee. PuriLite inspects all returns and reserves the right to refuse credits on damaged, used or non-resalable items. Your only obligation is the freight charge and restocking fee, provided your return is complete with original packaging, all documentation, warranty cards, cables etc. PuriLite reserves the right to authorize product returns after 30 days have passed from the order date. If the product is accepted after this period, it is subject to a 25% restocking fee and credit will be issued toward future purchases only.
Shipping and handling charges are non-refundable for all returns. The customer may also be responsible for return shipping charges, insurance and shipment tracking for returned merchandise.
Once you place an order, the following products are non-returnable: custom-cut, customer built or special order items (such as matting, slings, cranes, prefab offices, buildings, mezzanines, assembled lockers and regularly stocked items such as generators, pressure washers, water and trash pumps, snow throwers, radio headsets, striping paint, line stripers, floor care machines, vacuums, custom fabric chairs, forklifts) your order is considered non-cancellable and any custom-cut, customer built or special order items purchased by you are also non-returnable. Consumable style bulbs or lamps are not returnable. There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface).
Leased and hazardous items are also non-returnable. Contact customer service for a complete list of applicable products.
Larson product return policy Every order is tested prior to shipping. The product is tested before it is put into the shipping box, crate, pallet, etc. Larson take pictures and videos of every product for every order being shipped, and store these pictures and videos with the order number in our system. Because of the complexity of some of our products, we have a very limited return policy.
For safety reasons, we do not accept returns on any hazardous location, explosion proof or intrinsically safe products. Once these products leave the factory, we cannot be sure what happens to them. We must re-build and re-certify the units to specification to ensure that the next customer receives an item that is safe to use. This is cost prohibitive. For that reason, we do not accept returns on classified products. We do not accept returns on transformers, phase converters, or frequency converters. In order to install one of the aforementioned products, typically customers will modify the product (i.e. penetrate the housing to make connections, punch out knockouts, remove or damage tinning on lead wires during installation). Because we video test every unit before it ships to ensure the unit operates as described, we know when they leave here the units are operationally functional and meet the output voltage when supplied with the input voltage per the product specification. To be clear, we do not accept returns on these items under any circumstances for these reasons.
Products that are not addressed in the above two conditions must be returned in new, unused condition.
Below are some additional considerations:
Electrical/electronic parts are easily damaged by improper installation or testing. Because electronics are very sensitive to voltage overloads, it does not take much of a voltage spike to ruin a component. Because of this risk, all electrical products returned will undergo electrical testing and assessed a testing fee. This fee will be subtracted from the final return value.
Consumable style bulbs or lamps are not returnable.
Products that contain emergency backup components are subject to very narrow warranty terms and do not qualify for return. For customer convenience, we engage the battery pack prior to shipping all emergency backup products. Many times, particularly with hazardous location rated products, the battery packs are difficult to access and the customer generally plans to install the units shortly after receipt of the shipment. Battery backup components using older technologies (Nicad, NIMH, SLA, etc) will fail quickly if they do not maintain valid grid tie support. In other words, the batteries must receive a consistent maintained charge to perpetuate long lifespans. Battery backup products that are shelved (not installed) for periods greater than 3 weeks will likely fail and need replacement sooner. This replacement will not be covered under warranty. This can also occur is the units are installed but the grid tie option is not connected correctly. Customers can specify that they do not want the battery pack to be engaged at the time of ordering if they plan to shelve the units for long periods of time prior to installation.
There are many products on the site and not all pictures depict the exact configuration of each product. Many products are custom built and/or built on demand. In some cases, products are designed and not sold immediately and rendering may be used. In all cases, the end product is built to the specification listed and the pictures shown may be close approximations. Pictures are more likely to be close approximations with more complex products, including transformers, power distribution systems, control systems, light tower systems and other highly customizable products. In no way does the approximation validate a potential return. We always build to the specification. If customers have questions, they should ask prior to purchase to clarify.
There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface)
Many international orders, specialty orders and other complex build orders require prepayment in advance. This prepayment represents a commitment to the order. Cancelling the order will result in a deduction from the original amount paid if any refund is available, since an investment of time and money is typically required to acquire materials and prepare the order. While not all orders in this category require prepayment, cancellation fees may apply to other build orders as well. The percentage of the deduction is at Larson’s discretion but usually ranges from 30 to 50%.
How to Return For all returns, you can email us at sales@purilite.ca. You will need the invoice number in the subject line of the email. You can use one of your preferred carriers. Please note that for freight collect shipments, you are responsible for order tracking once the freight is loaded onto the truck. In addition, PuriLite Industrial cannot assist you with filing damage claims with your carrier.
All returns must be authorized by PuriLite. A Return Authorization Number must be obtained from PuriLite Customer Service Department, and the client must provide the Invoice number at the time of the request. The following conditions must be met. Failure to do so could result in refusal of a shipment by us.
At the time of the return, goods must be a stock item with PuriLite and the returned quantity must correspond to the quantity of the original packaging
Approval and shipping destination must be obtained from PuriLite before returning goods;
Goods must be returned to the appropriate location within 10 working days after receiving the return authorization number;
The return authorization number and invoice number must be identified on the return address label;
Goods must be in their original packaging, arrive undamaged and in resalable form
All returns are to be sent prepaid;
Specially ordered goods are non returnable – these products are identified with a part number beginning with a // on quotes and invoices.
Goods damaged in transit must be signed as damaged by the receiver and carrier at the time of receipt of goods in order to request credit from PuriLite.
PuriLite reserves the right to deny any Returns or Claims if the above conditions are not met.
Orders for products affected by x-factor events such as viral outbreaks and other extreme circumstances CANNOT be returned once shipped and billed.
