*RENT* Far-UVC Handheld Surface Sanitizer - (1) 40W 222nm Excimer Lamp - Aluminum - 15' 16/3 SOOW Cord

LARSON ELECTRONICSSKU: PL3-RNT-IND-HL-HDB-FUVC-EX-1L-120V-15C
filler

Price:
Sale price$6,705.99

Description

Specifications / Additional Information
This unit is Made In USA - Manufactured in Texas
RNT-IND-HL-HDB-FUVC-EX-1L-120V-15C UV Surface Disinfection Ratings/Features
Lamp Technology: Far UV-C Excimer 222nm Germicidal Light
Dimensions: 2'-L Kills 99% of Viruses and Other Germs
Weight: <5 lbs Mercury Free Lamp
Voltage: 120V AC, 60Hz Instant-On Lamp, No Warm Up Time
Total Watts: 40W More Efficient & Effective than UVC Lamps
Total UV Output: - No Harmful UVC Emissions
Effective UV Intensity: 40 uW/cm2 @ 1.57" No Block Off/Bandpass/Cutoff Filters) Needed
Luminous Efficacy: - Skin Safe & Eye Safe
Expected Lifespan: 10,000+ Hours Ozone Free
UV Wavelength: Far UV-C, 222nm Low Heat Output
CRI: - EPA Reg. No 98409-1
Lamp Type: Excimer EPA Est. No. 98409-TX-1
Lamp Base: -
Replacement Lamp: FRL-EMX-6-40W-FUVC
Beam Angle: 180º
Light Configuration: Flood
Power Efficiency: -
Power Factor: -
Switch: On/Off
Indicator Light: Red = In Operation
Amps: 0.33A @ 120V
Ambient Operating Temp: -
Materials: Aluminum
Mounting: Portable Handle
Wiring: 15' 16/3 SOOW Cord w/ Cord Cap
Cord Cap: 5-15 Straight, L5-15 Twist or Pigtail
***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating.***
' Product Overview '
function MM_openBrWindow(theURL,winName,features) { //v2.0 window.open(theURL,winName,features); }
This unit is for rentals This unit is Made In USA - Manufactured in Texas The Larson Electronics RNT-IND-HL-HDB-FUVC-EX-1L-120V-15C is a Far-UVC Handheld Surface Sanitizer which can disinfect 99% of viruses, bacteria, mold and spores on surfaces, work stations, tables and desks, as well as devices, machines and personal equipment. This unit offers far-UV 222nm output and comes equipped with a 40-watt excimer lamp. The aluminum UV system has 15' of 16/3 SOOW cord and a back-located handle for up close UV light treatment. *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The RNT-IND-HL-HDB-FUVC-EX-1L-120V-15C is a powerful sanitation solution for many types of surfaces, tables, work stations and work devices. Equipped with a 40-watt excimer lamp, this system offers far-UVC 222nm output. The lights have an expected lifespan of 10,000+ hours and emit a flood beam pattern. With an extended lamp, this UV system caters to a wide range of sanitation activities via 180 degrees of coverage. Operators may move the UV light around after exposure time to disinfect several sections. This unit is made out of aluminum. A red indicator light at the back of the unit notifies individuals when the lamp is on. This UV germicidal device comes with an on/off switch located near the handle. Multiple devices can be purchased to cover larger areas quicker. Far-UV 222 nm light is considered to be eye and skin safe for humans, allowing the lamps to be used in occupied areas safely with minimum risk. The 222 nm wavelength does not penetrate the cornea of the eye and cannot impose corneal impairment. Additionally, this UV band is blocked by the top layer of skin (stratum corneum) which protects underlying cells from damage. Exposure to far-UV 222 nm lamp does not cause skin inflammation or swelling. Due to these safety benefits, extensive protective clothing is not required when using this type of sanitation light in occupied areas. Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide “instant-on” startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications. Germicidal excimer lamps emit far-UV 222 nm light that is generated by specific excimer molecules. The far-UV lights come with an expected lifespan of 10,000+ hours. This gas-filled emitter is energy efficient and offers cool operation. A power supply is typically utilized with the non-toxic lamp to ensure consistent UV output. The sanitation light, which is suitable for use in occupied areas, features instant start capabilities.
Click Photos to Enlarge
5-15 Straight Blade Plug 15 Amp / 125V Rated L5-15 Twist Lock Plug 15 Amp / 125V Rated Flying Leads / Pigtail Wires
Wiring/Plug: This unit is equipped with 15 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground or NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug. Mount: The RNT-IND-HL-HDB-FUVC-EX-1L-120V-15C has a handle at the back of the unit for portable use. At <5 lbs., the lightweight design allows the device to be held directly over the target surface or object with ease. Suggested Applications: Sanitation, disinfection, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers, casinos, labs, hospitals, work stations, hotels and more; kill 99% of viruses, bacteria, mold, and spores.

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed