Compatible Equipment: Any Magnetic Mount Equipment of up to 30 lbs
Installation: Via 3rd Brake Light (Rear Cab Light) - hardware included
Weatherproof Seal: Foam Gasket Between Vehicle & Bracket
Shipping Weight: 15 lbs
Shipping Dimensions: 30"L x 20"W x 10"H
*PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE'S YEAR, MAKE, MODEL, TRIM PACKAGE, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.*
Images and graphics displayed in the body of this description are for example purposes only and may not directly reflect the equipment found on your truck. As each vehicle has slightly different equipment, these images were designed for illustration purposes only to display the functionality of the product. They do not represent all models of plates, hole designs, and form factors for the vehicle mounting plates offered by Larson Electronics. Please review the product high res images, instruction manual, and dimensional drawing for accurate description of what you are buying. ALWAYS confirm the Year, Make, Model, Trim, lamp type, and if you have a bed camera prior to ordering.
Â
'
Product Overview
'
Made in Texas
Increase your vehicle visibility, and reduce accidents and rooftop damage to your truck by easily installing our MMP-GM-SRA-2013-1500 lightweight third brake mounting plate. The rooftop mounting plate requires absolutely no drilling to install while supporting lights of up to 30 lbs. This mounting bracket attaches to the third brake light OEM location making it the perfect choice for the 2013 GMC Sierra 1500 trucks with Incandescent 3rd brake light. This MMP-GM-SRA-2013-1500 features an aluminum bracket with a 24" by 8" magnetic steel mounting surface. The lightweight aluminum mounting plate is compatible with the 2013 GMC Sierra 1500 trucks with Incandescent 3rd brake lights, offering operators and fleet vehicles a convenient mounting location for any magnetic light, equipment or application weighing up to 30 lbs.
*PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE'S YEAR, MAKE, MODEL, TRIM PACKAGE, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.*
*PLEASE NOTE THIS PLATE IS DESIGNED FOR 2013 GMC Sierra without Roof Spoiler. VERIFY THIS MATCHES YOUR VEHICLE BEFORE ORDERING/CALLING*
The MMP-GM-SRA-2013-1500 is constructed and engineered in Texas (Made USA) from CNC precision cut aluminum for the frame, and a steel for the top mounting plate surface. This mounting plate is especially designed for the 2013 GMC Sierra 1500 trucks with Incandescent 3rd brake lights. The lightweight aluminum plate offers operators a sturdy and reliable platform to deploy magnetic mounted lights or equipment of any type (requires magnetic base on equipment), up to 30 lbs., on the top of their truck for optimal performance. The MMP-GM-SRA-2013-1500 is installed via the rear cab lights, has a weatherproof seal on the back side for a secure and dry installation that helps protect against scratches to the body of the truck. The mounting plate requires absolutely no drilling for installation, and the CNC manufacturing process provides perfect fitments like OEM products. The aerodynamic design of the MMP-GM-SRA-2013-1500 is engineered to support wind-loads seen at highway speeds. This rooftop mount is powder coated for added durability, car-wash safe, and offered in a black, white, or grey finish.
Click image to Enlarge
Click image to Enlarge
Grooves and Contours on Roofs are not Flat and Secure Mounting Surface
MMP-GM-SRA-2013-1500 Steel Plate is Magnetic
The MMP series of vehicle mounting plates from Larson Electronics features an aluminum bracket and a steel top plate that is bolted onto the aluminum bracket. The aluminum bracket is mounted to the truck using the 3rd brake light to secure it to the vehicle. The steel plate is bolted to the top of the aluminum bracket. This steel plate allows for mounting equipment with magnetic bases to the steel plate. Due to both aesthetics and aerodynamics, newer trucks have a rounded design and contours or "grooves" on the roof. This can reduce the surface area for magnetically securing equipment to the top of the vehicle. Most equipment does not include any type of angle adjustment for the magnetic mount, and reduces the magnetic hold the equipment has to secure it to your vehicle. Additionally, many manufacturers do not provide a "no scratch" coating on the magnets due to it reducing the magnetic strength. Improper mounting surfaces and/or not pulling directly up to remove the equipment can result is the equipment sliding across the paint of your vehicle, resulting in scratches and paint damage. The use of the MMP-GM-SRA-2013-1500Â mounting bracket resolves all of these issues.
Features: Absolutely NO drilling to install, functional for fleet vehicles, attaches to third brake light OEM location, weatherproof gasket, car-wash safe, lightweight aluminum structure with steel magnetic mounting surface, powder coated, comes in different colors, supports up to a 30 lb. magnetic light or structure, and safe for highway speeds. The MMP-GM-SRA-2013-1500Â eliminates damage to your truck caused by rust, scratches, exposed wires, leaks, drilling holes and doesn't lower the resell value of your vehicle. The NO drill feature is great for leased trucks, eliminating rooftop damage with penalties associated with making modifications to the vehicle. This rooftop plate does not require any drilling to install; however, if desired to install this mount for other intended uses, it can be drilled for different mounting purposes.
Color Options
White
Grey
Black
*PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE'S YEAR, MAKE, MODEL, TRIM PACKAGE, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.*
*PLEASE NOTE THIS PLATE IS DESIGNED FOR 2013 GMC Sierra without Roof Spoiler. VERIFY THIS MATCHES YOUR VEHICLE BEFORE ORDERING/CALLING*
Installation: The MMP-GM-SRA-2013-1500 is easy to install and requires absolutely NO drilling. This mounting plate installs through the 3rd brake light on 2013 GMC Sierra 1500 trucks with Incandescent 3rd brake lights, between the body of the truck cab and the light. Operators simply remove their 3rd brake light, position the pre-cut mounting bracket and reinstall the light through the bracket with new mounting hardware included with purchase. Wiring can be ran into the cab of the truck by cutting a slit on the bottom side of the gasket and inserting cable into the cab.
The installation kit includes two toggle bolts and longer mounting bolts for the 3rd brake light. The toggle bolts are required to secure the mount to the vehicle body. The longer bolts are intended to replace the factory installed mounting bolts to account for the addition of the mounting bracket and gasket that is being installed between the cab and the light. When installed properly, there is no vibration or rattling of the mount when the vehicle is in use. The toggle bolts support the extra weight and secure the mount to the vehicle. The aerodynamic design of the front of the mount prevents any associated whistling or added road noise that may be seen with other mounting brackets.
3rd Brake Light Camera Option: Having a bed camera in the third 3rd brake light (NOT in the tailgate or bumper) will change the mounting bracket design. This bed camera is commonly referred to as "high mount camera" or "cargo camera." The view of this camera shows the contents of the truck bed. This IS NOT the reverse camera that is located in the tailgate that shows behind the vehicle. Those with a high mount bed camera with 3rd brake light must choose the "camera" option in order to get the correct design. Please choose the appropriate option below. The images to the right show the physical difference between models not equipped with camera (top right) and models equipped with camera (bottom right). The image below displays the viewing area that this camera will display on the in-dash screen.
Without Camera
With Camera
*Please note that MMP-GM-SRA-2013-1500Â is designed for trucks with Incandescent 3rd brake lights ONLY. Operators with %OLamp% 3rd brake lights will require the %OLAMP% model. Incandescent mounting plates and LED mounting plates are NOT interchangeable.*
Incandescent lights have a reflector and replaceable bulb behind the lens.
LED Lights have "squares" behind the lens and no replaceable bulb.
Applications: This vehicle mounting plate is used to increase vehicle visibility using magnetic base spotlights, flood lights, strobe lights, beacons, warning lights, signal lights, flashers, turn signals, brake lights, hunting lights, fishing lights, off-roading lights, horns, sirens, antennas or any rooftop magnetic based equipment. Common applications include hunting, fishing, off-roading, property management, security, search and rescue, farming operations and any other applications for which roof mounted spotlights, signal and warning lights, or other equipment is needed for the 2013 GMC Sierra truck owners.
Compatible Products: Do you not already have a magnetic light? Below are our most popular magnetic lights that are compatible with the MMP-GM-SRA-2013-1500:
Remote Control Lights
Strobes & Beacons
LED Light Bars
Warning Light Bars
*PLEASE NOTE: BEFORE CALLING TO ORDER, YOU WILL NEED TO KNOW YOUR VEHICLE'S YEAR, MAKE, MODEL, TRIM PACKAGE, AND IF YOUR VEHICLE HAS AN INCANDESCENT OR LED THIRD BRAKE LIGHT. THERE IS NOTHING WE CAN LOOK UP TO HELP YOU DETERMINE THIS. YOU NEED TO LOOK AT THE LIGHT AND SEE IF THERE ARE LITTLE ROUND BULBS (INCANDESCENT) OR LITTLE SQUARE LED CHIPS. WE CANNOT FINISH YOUR ORDER WITHOUT THIS INFORMATION. VERIFY LAMP TYPE BEFORE CALLING.*
*PLEASE NOTE THIS PLATE IS DESIGNED FOR 2013 GMC Sierra without Roof Spoiler. VERIFY THIS MATCHES YOUR VEHICLE BEFORE ORDERING/CALLING*
Additional Models: The MMP-GM-SRA-2013-1500 is designed for magnetic mounting of additional equipment within a 24" x 8" flat surface. We do offer additional sizes and form factors. For a full line of compatible mounting plates compatible with your vehicle, please visit the link below. Choose Year, Make, Model, and Trim to see all the designs from Larson Electronics that is compatible with the 2013 GMC Sierra 1500 truck.
Images and graphics displayed in the body of this description are for example purposes only and may not directly reflect the equipment found on your truck. As each vehicle has slightly different equipment, these images were designed for illustration purposes only to display the functionality of the product. They do not represent all models of plates, hole designs, and form factors for the vehicle mounting plates offered by Larson Electronics. Please review the product high res images, instruction manual, and dimensional drawing for accurate description of what you are buying. ALWAYS confirm the Year, Make, Model, Trim, lamp type, and if you have a bed camera prior to ordering.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
Payment
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Return & Refund Policy
For All non-Larson Products If you are not satisfied with a product, contact us by emailing or call 1-844-787-LITE within 30 days of receipt. A refund may be arranged excluding freight charges upon inspection. Returned merchandise must be shipped in original packaging, freight prepaid, unused, and in resalable condition, and are subject to 25% restocking fee. PuriLite inspects all returns and reserves the right to refuse credits on damaged, used or non-resalable items. Your only obligation is the freight charge and restocking fee, provided your return is complete with original packaging, all documentation, warranty cards, cables etc. PuriLite reserves the right to authorize product returns after 30 days have passed from the order date. If the product is accepted after this period, it is subject to a 25% restocking fee and credit will be issued toward future purchases only.
Shipping and handling charges are non-refundable for all returns. The customer may also be responsible for return shipping charges, insurance and shipment tracking for returned merchandise.
Once you place an order, the following products are non-returnable: custom-cut, customer built or special order items (such as matting, slings, cranes, prefab offices, buildings, mezzanines, assembled lockers and regularly stocked items such as generators, pressure washers, water and trash pumps, snow throwers, radio headsets, striping paint, line stripers, floor care machines, vacuums, custom fabric chairs, forklifts) your order is considered non-cancellable and any custom-cut, customer built or special order items purchased by you are also non-returnable. Consumable style bulbs or lamps are not returnable. There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface).
Leased and hazardous items are also non-returnable. Contact customer service for a complete list of applicable products.
Larson product return policy Every order is tested prior to shipping. The product is tested before it is put into the shipping box, crate, pallet, etc. Larson take pictures and videos of every product for every order being shipped, and store these pictures and videos with the order number in our system. Because of the complexity of some of our products, we have a very limited return policy.
For safety reasons, we do not accept returns on any hazardous location, explosion proof or intrinsically safe products. Once these products leave the factory, we cannot be sure what happens to them. We must re-build and re-certify the units to specification to ensure that the next customer receives an item that is safe to use. This is cost prohibitive. For that reason, we do not accept returns on classified products. We do not accept returns on transformers, phase converters, or frequency converters. In order to install one of the aforementioned products, typically customers will modify the product (i.e. penetrate the housing to make connections, punch out knockouts, remove or damage tinning on lead wires during installation). Because we video test every unit before it ships to ensure the unit operates as described, we know when they leave here the units are operationally functional and meet the output voltage when supplied with the input voltage per the product specification. To be clear, we do not accept returns on these items under any circumstances for these reasons.
Products that are not addressed in the above two conditions must be returned in new, unused condition.
Below are some additional considerations:
Electrical/electronic parts are easily damaged by improper installation or testing. Because electronics are very sensitive to voltage overloads, it does not take much of a voltage spike to ruin a component. Because of this risk, all electrical products returned will undergo electrical testing and assessed a testing fee. This fee will be subtracted from the final return value.
Consumable style bulbs or lamps are not returnable.
Products that contain emergency backup components are subject to very narrow warranty terms and do not qualify for return. For customer convenience, we engage the battery pack prior to shipping all emergency backup products. Many times, particularly with hazardous location rated products, the battery packs are difficult to access and the customer generally plans to install the units shortly after receipt of the shipment. Battery backup components using older technologies (Nicad, NIMH, SLA, etc) will fail quickly if they do not maintain valid grid tie support. In other words, the batteries must receive a consistent maintained charge to perpetuate long lifespans. Battery backup products that are shelved (not installed) for periods greater than 3 weeks will likely fail and need replacement sooner. This replacement will not be covered under warranty. This can also occur is the units are installed but the grid tie option is not connected correctly. Customers can specify that they do not want the battery pack to be engaged at the time of ordering if they plan to shelve the units for long periods of time prior to installation.
There are many products on the site and not all pictures depict the exact configuration of each product. Many products are custom built and/or built on demand. In some cases, products are designed and not sold immediately and rendering may be used. In all cases, the end product is built to the specification listed and the pictures shown may be close approximations. Pictures are more likely to be close approximations with more complex products, including transformers, power distribution systems, control systems, light tower systems and other highly customizable products. In no way does the approximation validate a potential return. We always build to the specification. If customers have questions, they should ask prior to purchase to clarify.
There are no returns on any medical and/or sanitizing products for obvious safety reasons. This includes PPE (including masks), tests, thermometers, sprayers and UVC lighting of any kind (portable and surface)
Many international orders, specialty orders and other complex build orders require prepayment in advance. This prepayment represents a commitment to the order. Cancelling the order will result in a deduction from the original amount paid if any refund is available, since an investment of time and money is typically required to acquire materials and prepare the order. While not all orders in this category require prepayment, cancellation fees may apply to other build orders as well. The percentage of the deduction is at Larson’s discretion but usually ranges from 30 to 50%.
How to Return For all returns, you can email us at sales@purilite.ca. You will need the invoice number in the subject line of the email. You can use one of your preferred carriers. Please note that for freight collect shipments, you are responsible for order tracking once the freight is loaded onto the truck. In addition, PuriLite Industrial cannot assist you with filing damage claims with your carrier.
All returns must be authorized by PuriLite. A Return Authorization Number must be obtained from PuriLite Customer Service Department, and the client must provide the Invoice number at the time of the request. The following conditions must be met. Failure to do so could result in refusal of a shipment by us.
At the time of the return, goods must be a stock item with PuriLite and the returned quantity must correspond to the quantity of the original packaging
Approval and shipping destination must be obtained from PuriLite before returning goods;
Goods must be returned to the appropriate location within 10 working days after receiving the return authorization number;
The return authorization number and invoice number must be identified on the return address label;
Goods must be in their original packaging, arrive undamaged and in resalable form
All returns are to be sent prepaid;
Specially ordered goods are non returnable – these products are identified with a part number beginning with a // on quotes and invoices.
Goods damaged in transit must be signed as damaged by the receiver and carrier at the time of receipt of goods in order to request credit from PuriLite.
PuriLite reserves the right to deny any Returns or Claims if the above conditions are not met.
Orders for products affected by x-factor events such as viral outbreaks and other extreme circumstances CANNOT be returned once shipped and billed.