40W Explosion Proof Fluorescent Light Fixture - Paint Booth Rated - 3118 Lumens - 2 Lamp - 2 foot

LARSON ELECTRONICSSKU: PL3-EPL-24-2L-INTL-20WT8
filler

Price:
Sale price$2,069.99

Description

Specifications / Additional Information
EPL-24-2L-INTL-20WT8 Explosion Proof Ratings
NRTL Listed for United States & Canada Class 1 Division 1, Groups C and D
Dimensions: W-11.25"  L-27.5"  H-8.5 " Class 1 Division 2, Group A,B,C,D
Weight: 55 Lbs Class II Division 1- 2, Groups E,F,G
Total Watts: 40 watts NRTL Certified to UL 844, 924
Voltage: Multi- 120V-60hz  220V-50hz  240V-60hz  277V-60hz NRTL Certified to UL 1598 Marine Type
Total Lumens: 3118 NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)
Lamp Life Expectancy: 24,000 Hours Listed for Paint Spray Booths*
Efficiency: 78 Lumens per Watt California Title 24 Compliant
Ambient Operating Temp Range:-30 C to 70 C  
Beam Angle: N/A
Color Temp: 4100K
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded
Operating Temp Rating: T6 Rated Intl: 1-214-616-6180
Minimum Operating Temp: -30 C Fax: 1-903-498-3364
Maximum Case Temp: 90 C E-mail: 
*Wattage totals are lamps only and may vary with different lamps.
' Product Overview '
Made in the USA The Larson Electronics EPL-24-2L-INTL-20WT8 Explosion Proof Fluorescent Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1,  Class 2 Division 1 and for hazardous locations where flammable chemical/petrochemical vapors exist or have the potential to exist. The EPL-24-2L-INTL-20WT8 fixture is a 2 foot long, 2 lamp, Class 1 Division 1 and Class 2 Division 1 & 2 explosion proof fluorescent light and an ideal choice for use in applications where space is at a premium. This T6 temperature rated fixture comes standard with F20-T8 lamps and is available with a variety of lamp options which are listed below. The lamps are protected by heat and impact resistant Pyrex tubes and the fixture is constructed of copper free aluminum alloy. The lamp reflectors are corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and for use in paint spray booths. The EPL-24-2L-INTL-20WT8 provides operators in hazardous locations with a compact, reliable and affordable lighting solution that provides the best explosion proof protection available without sacrificing light quality or fixture durability.
Surface Mount (Standard)
Additional mounting options: Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown in the photos above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Pendant Mount (Optional)
3 Conduit Positions Click Photo to Enlarge
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The first picture shown above illustrates the ballast side bracket and also shows the access caps for changing the bulbs. The second picture shows the bracket at the opposite end of the fluorescent light.  
Made in USA Quality Lamp Options
1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy. 4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted. Top and bottom covers secured with nuts and bolts, instead of threaded through holes, which can be damaged with dirt. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion. 6. A wrench is used to unscrew the end caps for relamping the fixture, while other models require the œtap and knock off method to loosen the end cap. 7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection. F20-T8 1559 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed