Descripción
PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1(647) 254-9757 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
Buy American Compliant
The Larson Electronics LEDLB-20E-IR-MHL LED Headlight offers powerful infrared light output and extreme durability. This IP68 rated infrared LED headlight is waterproof to three meters and produces an infrared light beam that can only be seen through the use of night vision goggles. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in covert applications within military environments.
The LEDLB-20E-IR-MHL infrared LED headlight produces light in the infrared 940Nm end of the light spectrum. Twenty Edison Edixeon 3 watt infrared emitters are arranged in rows and paired with high purity 35 degree optics to produce a a wider beam spread and more light over a larger area nearer the fixture. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
These infrared lights are ideal for use as headlights, signal lights, or indicator lights on vehicles where covert operations require the ability to run vehicles under blacked out conditions, yet maintain their visibility to friendly personnel through the use of night vision equipment.
LEDLB-20E-IR-MHL 35° Flood Beam
LEDLB-20E-IR-MHL 10° Spot Beam
Heat Management:
Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control:
These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Durability:
The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Note:
Most of our LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Specifications
LEDs: 20 Edixeon 3 Watt IR LED Emitters
Dimensions: 12"-LÂ Â 3"-HÂ Â 3.57"-D
Watts: 60
Voltage: 9-42 VDC
Weight: 6.4 Lbs
Lighting Configuration: 0° Spot or 35° Flood
Mounting: Stud
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts)Â 2.5 (on 24 volts)
Wavelength: 750Nm, 850Nm or 940Nm
LED Life Expectancy: 50,000 hours
Optics Efficiency: 90%
Materials: Aluminum Housing, Polycarbonate Lens
Housing Colors: Black or White
Spot Beam: 800`L x 80`W
Flood Beam: 250`L x 250`W
CE Certified
Buy American Compliant
The Larson Electronics LEDLB-20E-IR-MHL LED Headlight offers powerful infrared light output and extreme durability. This IP68 rated infrared LED headlight is waterproof to three meters and produces an infrared light beam that can only be seen through the use of night vision goggles. This light can run on any voltage from 9 to 42 volts and provides an extremely rugged infrared lighting solution that is ideal for use in covert applications within military environments.
The LEDLB-20E-IR-MHL infrared LED headlight produces light in the infrared 940Nm end of the light spectrum. Twenty Edison Edixeon 3 watt infrared emitters are arranged in rows and paired with high purity 35 degree optics to produce a a wider beam spread and more light over a larger area nearer the fixture. These LED light bars are IP68 rated and waterproof to 3 meters, sealed against intrusion by dust and dirt, and very ruggedly constructed to withstand the most demanding environments, conditions and applications. The entire LEDLB-E series are constructed of extruded aluminum and feature heavier housings, rubber isolated mounts and unbreakable polycarbonate lenses to provide increased durability against vibrations, impacts, waves, hard rains, sand and high winds.
These infrared lights are ideal for use as headlights, signal lights, or indicator lights on vehicles where covert operations require the ability to run vehicles under blacked out conditions, yet maintain their visibility to friendly personnel through the use of night vision equipment.
LEDLB-20E-IR-MHL 35° Flood Beam
LEDLB-20E-IR-MHL 10° Spot Beam
Heat Management:
Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Edison Edixeon Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
Voltage Control:
These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDLB series light bars can operate on current ranging from 9 to 42VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Durability:
The LEDLB-E series of LED light bars from Larson Electronics offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. The LED lights with the ‘E’ part number designation are designed for extreme durability and are larger and nearly twice as heavy as their standard counterparts. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three feet and resist ingress of dust, dirt and humidity. The housings are formed from thick extruded aluminum and the lenses are unbreakable polycarbonate. The Edixeon LEDs offer inherent LED resistance to shocks and vibrations contributing to these units 15.6Grms rating of vibration tolerance. We recommend these LED lights for high stress - high vibratory conditions, high humidity climates, very cold areas and rough saltwater conditions. They are also well suited to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
Note:
Most of our LEDLB, LEDP3W, LEDP10W, and LED10W series LED spotlights and floodlights are terminated with a Deutsch IPD / LADD DT04-2P connector. The mating connector plug is DT06-2S. Most LEDLB and LED10W series lights ship with mating connector as part of a harness or pigtail, depending on the model. Some larger LED lights like the LEDLB-160X2 or LEDLB-200X2 or multiple function LED lights (i.e. high/low beam, modulating, IR/Visible combos) will have different Deutsch connectors.
Specifications
LEDs: 20 Edixeon 3 Watt IR LED Emitters
Dimensions: 12"-LÂ Â 3"-HÂ Â 3.57"-D
Watts: 60
Voltage: 9-42 VDC
Weight: 6.4 Lbs
Lighting Configuration: 0° Spot or 35° Flood
Mounting: Stud
Wiring: Deutsch IPD / LADD DT04-2P connector
Amps: 5 (on 12 volts)Â 2.5 (on 24 volts)
Wavelength: 750Nm, 850Nm or 940Nm
LED Life Expectancy: 50,000 hours
Optics Efficiency: 90%
Materials: Aluminum Housing, Polycarbonate Lens
Housing Colors: Black or White
Spot Beam: 800`L x 80`W
Flood Beam: 250`L x 250`W
CE Certified
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
You may also like
Larson Electronics
Larson 72 Watt Infrared LED Light System - Spot/Flood Combination
Precio de venta$3,028.00
Larson Electronics
Larson 72W Infrared LED Light - 24 LEDs - Magnetic Trunnion Mount - IP68 Rated
Precio de venta$2,728.00
LARSON ELECTRONICS
Infrared LED Military Driving Lights - High/Low Beams - 9-42VDC - Covert IR Headlights
Precio de venta$1,298.00
Recently viewed
Larson Electronics
Larson 50 foot Cam Lock Cord Set (4 X 3/0 and 1 X #4 Type W) - 600V - 400-Amp
Precio de venta$7,614.00
Ahorrar 17%
Honeywell
Honeywell Cradle - Bar Code Scanner - Charging Capability - Synchronizing Capability - Black
Precio de venta$507.99
Precio habitual$609.82
Hpe
HPE 10 TB Hard Drive - 3.5" Internal - SAS (12Gb/s SAS) - Storage System Device Supported - 7200rpm
Precio de venta$3,724.99