Descripción
Specifications / Additional Information
HLSW-AE.EX-DCS-FG-PB-16A-AM.150.1-SG-600V-M1 Flameproof Motor Control Station | Ratings |
Listing: NRTL Listed for ATEX/IECEx Locations | Approved for Zone 1 and 2 |
Unit Type: Explosion Proof Motor Control Station | Approved for Zone 21 and 22 |
Dimensions: 7.87" x 3.38" x 2.99" (200mm x 86mm x 76mm) | ATEX EX II 2 GD |
Weight: - | IEC Ex d e IIC T6 Gd IP66 |
Rated Voltage: 250V AC or 110V DC | IEC Ex tb IIC T80°C Db |
Rated Frequency: - | Temp Rating -40℃≤Ta≤50℃ |
Amperage Rating: 16A (250V AC), 1A (110V DC) | NRTL Certified to IEC 60079 |
Mechanical Life: 100,000+ Operations | NRTL Certified to EN 60079 |
Meter Type: 150/1 Ammeter | CE Certified |
Push Button Type: Double Momentary | Conforms to CE 0575 |
Push Button Color: Red/Green | IP66 Weatherproof |
Contact Configuration: (1) NO, (1) NC | Â |
Label/Marking: - | Â |
Operating Temp: -40°C to +50°C | |
Materials: Static Resistant Plastic Alloy (Housing) | |
Mounting: Pendant | |
Terminal Strip: (8) 2.5mm - Din Rail Mount | |
Cable Entry: (2) 3/4" NPT @ Bottom | |
Maximum Cable OD: 5.5mm-13mm | |
PLEASE NOTE: The HLSW-AE.EX series of explosion proof switches, operators, buttons, lights, and dials are certified to European Union (ATEX) and International (IEC Ex) standards and are approved for installing in these locations. This unit IS NOT certified to United States (NEC) or Canadian (CEC) standards for hazardous location. This unit DOES NOT carry UL or CSA ratings. Please contact Larson Electronics for NEC/CEC equvilant version of this product if you intend to install the product in United States, Canada, or any country that followed NEC or CEC electrical standards. |
The Larson Electronics HLSW-AE.EX-DCS-FG-PB-16A-AM.150.1-SG-600V-M1 Explosion Proof Motor Control Station is a compact solution for controlling industrial machinery or equipment in flammable environments. Equipped with an ammeter and double push buttons, this device is compatible with 250V AC/110V DC and contains NO and NC contacts. The IP66-rated unit is protected by a static resistant plastic alloy housing. PLEASE NOTE: The HLSW-AE.EX series of explosion proof switches, operators, buttons, lights, and dials are certified to European Union (ATEX) and International (IEC Ex) standards and are approved for installing in these locations. This unit IS NOT certified to United States (NEC) or Canadian (CEC) standards for hazardous location. This unit DOES NOT carry UL or CSA ratings. Please contact Larson Electronics for NEC/CEC equvilant version of this product if you intend to install the product in United States, Canada, or any country that followed NEC or CEC electrical standards. The HLSW-AE.EX-DCS-FG-PB-16A-AM.150.1-SG-600V-M1 is designed for use in Zones 1/2 and Zones 21/22 rated combustible locations. This double-push button unit is rated for 250V AC at 16 amps and 110V DC at 1 amp. There is a 150/1 ammeter available above the push buttons. Featuring more than 100,000 operating cycles, the device operates with momentary action for both red and green push buttons (maintained action is available at an additional cost). This push button can be added to custom control station builds that contain pilot lights, other push buttons, emergency stop, selector switches, sensors and more. The explosion proof device is constructed of static resistant plastic alloy (housing). The IP66-rated device is suitable for ATEX/IECEx rated work sites with operating temperatures ranging between -40°C and +50°C. There are no labels or marking on this push button. We offer both custom labels (upon request) and the following selection of markings at an additional cost: On, Off, Start, Stop, I, O, Forward, Reverse and directional arrows. The weatherproof unit contains (1) normally open and (1) normally closed contacts. We offer a variety of contact configurations, such as: (2) normally open, (2) normally closed, (2) normally open and (2) normally closed, (4) normally open, (4) normally closed, (3) normally open and (1) normally closed, as well as (1) normally open and (3) normally closed. Wiring: This non-illuminated device is equipped with a din rail mount terminal strip with eight, 2.5mm terminal connections. Cable entry is facilitated by two, 3/4" NPT hubs located at the bottom of the unit. Mounting: The HLSW-AE.EX-DCS-FG-PB-16A-AM.150.1-SG-600V-M1 is compatible with pendant mounting applications. Applications: Petroleum refineries, chemical and petrochemical plants, paint spray booths, food manufacturing buildings, agricultural operations, grain storage centers, industrial equipment and more. |
 |
Shipping and delivery Information
The PuriLite Peace of Mind 30-day money back guarantee
Payment
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
You may also like
LARSON ELECTRONICS
Explosion Proof Push Button, Green, Momentary, ATEX/IECEx, M20 Hub, (4) N/C Contacts
Precio de venta$1,042.00
LARSON ELECTRONICS
Explosion Proof Push Button, Green, Maintained, ATEX/IECEx, M20 Hub, (4) N/C Contacts
Precio de venta$1,042.00
LARSON ELECTRONICS
Explosion Proof Push Button, Green, Momentary, ATEX/IECEx, M20 Hub, (4) N/O Contacts
Precio de venta$1,042.00
LARSON ELECTRONICS
Explosion Proof Push Button, Black, Momentary, ATEX/IECEx, M20 Hub, (4) N/C Contacts
Precio de venta$1,042.00
LARSON ELECTRONICS
Explosion Proof Push Button, Red, Maintained, ATEX/IECEx, M20 Hub, (4) N/C Contacts
Precio de venta$1,042.00