Relay Shield v2.0

PuriLiteSKU: PL4-DEV-13769
filler

Precio:
Precio de venta$42.99
 Más opciones de pago

Descripción

This Relay Shield v2.0 from Evil Mad Scientist is a simple Arduino add-on that gives your Arduino the ability to control a single electromechanical relay for switching loads of up to 24VDC or 40VAC. Each Relay Shield comes equipped with a single pole - double throw (SPDT) sealed relay which can handle a current load of up to 5A. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC (Normally Closed) contact to ground and closing the NO (Normally Open) contact. Use them to switch high voltage/high current devices. As this is a shield, it is powered straight from the 5V power supplied by your Arduino, simply slide it into your Arduino or shield-compatible board (like the RedBoard) and you will be good to go!

The relay shield is controlled through pin Digital 4 on your Arduino via a transistor labeled "Q1". When output Digital 4 on your Arduino is low, the relay shield will connect the NC pin to the "Common" pin of the screw terminal. When output Digital 4 goes high, the œCoil On? LED will light up and the relay shield will instead connect the NO pin to the "Common" pin of the screw terminal. Version 2.0 of this shield adds the ability to control the mechanical relay from a pin other than D4.

The Relay Shield is sold as an easy-to-assemble kit and includes everything listed below with clear assembly instructions listed in the documents section.

**Includes:**

* 1x Relay Shield PCB
* 1x GSLA SPDT 5A Relay
* 1x Red LED, 3mm
* 1x 100uF 10V Capacitor
* 1x 0.1uF 25V Capacitor
* 1x 2N4401 Transistor
* 1x Screw Terminal, 3-pos
* 1x Arduino Header Set
* 2x 1000 ohm 1/4W Resistor
* 2x 1N5817 Diode

**Documents:**

* [Schematic](http://shop.emscdn.com/catalog/emskits/relayshield/kitv2/relayshield_B.pdf)
* [Datasheet](http://cdn.sparkfun.com/datasheets/Dev/Arduino/Shields/G5LA_E.pdf) (G5LA Relay)
* [Assembly Instructions](http://wiki.evilmadscientist.com/Simple_Relay_Shield_Assembly_v2)
* [Relay Shield Wiki](http://wiki.evilmadscientist.com/Simple_Relay_Shield)
* [Product Page](http://shop.evilmadscientist.com/productsmenu/tinykitlist/544)

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

You may also like

KTA-223 USB/RS485 Relay IO Board
Mux Shield II
PuriLite Mux Shield II
Precio de venta$58.99
USB Host Shield
SparkFun USB Host Shield
Precio de venta$58.99
Joystick Shield - Bare PCB
SparkFun Joystick Shield - Bare PCB
Precio de venta$21.99
ProtoScrewShield
PuriLite ProtoScrewShield
Precio de venta$56.99
Pro Micro - 5V/16MHz
PuriLite Pro Micro - 5V/16MHz
Precio de venta$57.99
Vernier Interface Shield
SparkFun Vernier Interface Shield
Precio de venta$54.99
microSD Shield
SparkFun microSD Shield
Precio de venta$51.99
Arduino Ethernet Shield 2
PuriLite Arduino Ethernet Shield 2
Precio de venta$62.99
Power Driver Shield Kit
SparkFun Power Driver Shield Kit
Precio de venta$75.99

Recently viewed