20W Explosion Proof Traffic Light - Dual Stack LED Light - Wire Guard - ATEX/IECEx
20W Explosion Proof Traffic Light - Dual Stack LED Light - Wire Guard - ATEX/IECEx
| ATEX-EPL-TL-2X10W-C Explosion Proof LED Stack Light | Ratings/Approvals |
| Listing: NRTL Listed for ATEX/IECEx Rated Locations | IECEx PTB 12.0017 |
| Lamp Technology: LED | Ex d e op IIC T4, T6 |
| Lamp Quantity: (2) | Ex tb IIIC T4 |
| Dimensions: 11.17"-H 8.97" -D (Lamp Only) | PTB 11 ATEX 1045 |
| Weight: - | Ex II 2 G Ex d e opis IIC T4 |
| Voltage: 120-277V AC, 24V DC, 12V DC, 24V AC or 12V AC | Ex II 2 D Ex tb IIIC T4 |
| Total Watts: 20W | ATEX Zones 1 & 2, 21 & 22 |
| Single-lamp Watts: 10W | IP66 |
| Total Lumens: - | |
| Single-lamp Lumens: - | |
| Luminous Efficiency: - | |
| Expected Lamp Life: 50,000+ Hours | |
| LED Colors: Red/Green,Red/White, Red/Blue, Red/Amber, Red/Purple, White/Blue, White/Green, White/Amber, White/Purple, Blue/Green, Blue/Amber, Blue/Purple, Amber/Green, Amber/Purple, Green/Purple or Red/Red | |
| Color Rendering Index: - | |
| Lamp Type: - | |
| Lamp Base: - | |
| Replacement Lamp: - | |
| Beam Configuration: Steady Burn, Strobe or Strobe/Steady | |
| Lighting Configuration: - | |
| Power Efficiency: - | |
| LED Drive: - | |
| Amp Draw: - | |
| Ambient Temperature Range: -40°C to +55°C | |
| Materials: Aluminum Housing, Temperature-resistant Pressed Glass Lens, Stainless Steel Wire Guard | |
| Mounting: Pre-drilled Aluminum Flat Surface Mounting Bracket | |
| Wiring: 10` SOOW Cable w/ Flying Leads | |
| Hub: (2) 3/4" NPT |
| The ATEX-EPL-TL-2X10W-C Explosion Proof Traffic Light from Larson Electronics is designed for use in ATEX Zones 1 & 2 and 21 & 22 industrial facilities. This 20-watt explosion proof LED stack light supports red, green, blue, white, purple and amber colors, as well as two lamps. This LED stack light is suitable for routing traffic and signaling, and visual indications in industrial refueling stations and process status indication in manufacturing facilities. The ATEX-EPL-TL-2X10W-C is a dual indicator lighting solution for industrial refueling stations and manufacturing facilities. This ATEX-rated unit features red, green, blue, white, purple and amber colors (one lamp each color) with exceptional lumen output. The LED fixture is available in 120-277V AC, 24V DC, 12V DC, 24V AC or 12V AC. Lighting configuration options include the following: steady burn, strobe or strobe/steady. The LED luminary consumes up to 20 watts during operation (10 watts per lamp) and is approved for ATEX Zone 1 & 2 and 21 & 22 work sites. This explosion proof LED traffic light is constructed of high-grade aluminum with temperature-resistant pressed glass lenses. Stainless steel wire guards protect each LED fixture from rugged handling and environments. The IP66-rated LED lamps in this traffic light offer cool operation and clean bright output that surpasses that of 100-watt incandescent indicator lamps. This stack light can also be configured with audible horns. Commonly used color codes for indicators: •Red: Stop / Failure conditions, such as an emergency stop or machine fault •Yellow: Caution / Warnings, such as over-temperature or over-pressure conditions •Green: Go / Normal machine or process operation •Blue: External help request / Operator/Supervisor required / Maintenance personnel assistance required •White: User-defined conditions specific to application and environment LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Wiring/Mounting: The ATEX-EPL-TL-2X10W-C comes with 10 feet of SOOW cord with flying leads for completing electrical connections. Individual leads per lamp allow independent operation, making this unit ideal for fuel depots and manufacturing facilities where status indicators are necessary. The individual leads can be connected to user provided terminal blocks or existing indicator systems. Two, 3/4" NPT hubs are also available during installation. Mounting is provided by a heavy gauge aluminum back plate fabricated from copper free aluminum with four predrilled holes designed to be bolted to walls, ceilings and flat surfaces for permanent and secure attachment. Note on Lights: Color choices and light configuration of this unit can be customized to your requirements. We offer steady burn or strobing LED lamps, as well as high or low voltage configurations. Please contact us for special color configurations. Applications: Manufacturing plants, oil refineries, wastewater treatment facilities, confined spaces, agricultural sites, grain storage centers, gas stations, food production buildings, chemical processing, flammable work sites and more. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
