Made in the USA
The Larson Electronics EPEXC-CO-60-14.3-15A-1523 60' Explosion Proof extension cord allows operators to safely extend the range of their explosion proof light or equipment cords beyond the boundaries of the hazardous work area. Equipped with Class I & II, Division 1 & 2 plug and connector, this unit is approved for use with explosion proof equipment within classified environments.
Each explosion proof extension cord is constructed of 60' of 14/3 SOOW cord and rated at 15 amps of continuous service. The cord is chemical and abrasion resistant and comes with an explosion proof, 15 amp 5-15C connector style receptacle with hinged cover installed on one end and an explosion proof 15-amp plug installed on the other end. The plug on this cord can only be used in T-style outlets and will not work in standard electrical outlets.
The plugs on these units are of a twist lock design. In order for a secure and working connection to take place, the operator must insert the plug and twist until it locks into place. This ensures a safe seal is made before any sparks from e lectrical contact can take place. To ensure the highest safety, operators should make connections outside of the hazardous area.
The receptacle is constructed of non sparking aluminum and finished with an epoxy powder coating for durability and added corrosion resistance. The internal receptacle plug contacts are constructed of brass and designed to maintain constant pressure along their entire length for superior connectivity. The plug receptacle is deeply recessed to prevent accidental contacts and designed for twist lock plug insertion to provide secure connections. A neoprene seal fitted inside the connector receptacle seals against the plug when inserted to provide positive sealing against water ingress. A spring loaded receptacle door provides an automatic weather-tight seal when the plug is removed. This flip-style lid features a special notch, allowing operators to lock the door in the open position while plugging or unplugging devices. With no devices plugged into the connector, the lid will screw shut, providing a NEMA 4X seal. When a plug is installed in this connector, the internal seals provide a NEMA 3 seal.
Outlet accepts EPP-15A explosion proof plugs
We offer this unit in a 120 V configuration. Each receptacle's contacts are deep recessed to avoid accidental contact and will accept standard non explosion proof plugs that are NEMA 5-15C compatible although explosion proof plugs must be used to preserve explosion proof approval in hazardous environments. Ordinary location plugs will NOT activate this cord's explosion proof receptacles. This explosion proof connector is a mate for the Larson Electronics EPP-15A explosion proof plugs and is compatible with all the Larson Electronics explosion proof lights we make with an explosion proof plug. This unit's receptacle is designed to safely contain any arcs between the internal contacts that may be created within the receptacle housing.
These cords use T style plugs and will work with non-explosion proof standard receptacles and plugs (NEMA 5-15R) but will not work with standard 120 V wall outlets. The included plugs and receptacle are cross-interchangeable with Crouse Hind™ part# ENP5201 plugs and receptacles and Hubble-Killiark part# UGP-20231 ACCEPTOR plugs and receptacles. Any equipment requiring these C-H or H-B plugs should work with these cords. Due to possible manufacturer changes we cannot guarantee interchangeability although we have made every effort to ensure cross compatibility correctness.
Manufacturing, Industrial, Warehouse, Lighting, Explosion Proof Light Fixtures, Grinders, Wet areas or Locations Where Combustible Dust is Present.
Contact firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Amp Rating: 15 Amp Continuous Service
Dimensions: Cord Length - 60 Feet; Plug - 2.78"L x 1.75"W
Configuration: 2 Pole 3 Wire
Voltage: 120 Volts
Cord Cap: 5-15P
Wiring: 60' 14/3 SOOW Cable Terminated w/ (1) Explosion Proof Straight Blade Plug and (1) 15 Amp Connector
Connector: 5-15C EXP
Receptacle Specs: 1 Inline Receptacle
Materials: Copper Free Aluminum
Mating Plugs: EPP-15A
Finish: Epoxy Powder Coat
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.