|EPL-CM-150LED-RT Flat Surface Mount LED Fixture
|Listing: United States & Canada
|Class 1 Division 1 & 2, Groups C and D
|Lamp Type: Cree LED
|Class 2, Divisions 1 & 2, Groups E,F,G
|Dimensions: 18"-W 17"-H 9"-D`
|Class 3, Divisions 1 & 2
|Weight: 40 lbs.
|T5 Temperature Rating
|Total Watts: 150W
|Certified to UL844 and C22.2 No. 137
|LED Lamp Lumens: 21,000
|Lamp Efficiency: 140 Lm/W
|Paint Spray Booth Approved
|Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K
|IP67 Rated Waterproof
|Color Rendering Index: >75 CRI
|Multiple LED Driver Banks
|Operating Temp Range: -50°C to +65°C
|80% Lumen Retention @ 60,000 Hours
|Mounting: Ceiling/Flat Surface Mount w/ (6) Predrilled Holes
|Materials: Aluminum Frame & Body, Glass Lens
|Finish: Powder Coated - Gloss Grey
|Beam Type: Wide Flood
|Power Factor: 0.992
|Voltage: 100-277 VAC, 50/60Hz or 11-25 Volts AC/DC
|Wiring: 100` 16/3 SOOW Cord Explosion Proof Cord Cap
|Cord Cap: 5-15 Straight Blade Explosion Proof Plug
|Made in the USA The Larson Electronics EPL-CM-150LED-RT Ceiling Mount light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and a compact design make this lamp an excellent replacement upgrade option for bulky and high maintenance cost, older fixtures. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 flat surface mount explosion proof light fixture provides 21,000 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
The explosion proof LED light fixture features multiple LED drivers which helps increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be affected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied; emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
This light is universal voltage capable and can be operated with 100-277 VAC, 50/60Hz. We also offer a low voltage version of this LED fixture that operates on AC/DC voltages from 11-25 Volts. This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
The EPL-CM-150LED-RT flat surface mount explosion proof light features an adjustable swivel bracket constructed of 3/8" aluminum. This aluminum mounting bracket has six predrilled holes, allowing operators to mount the unit to ceilings, walls, and any flat surfaces. The wiring of this portable hazardous location lighting system consists of 100 feet of SOOW cable and is terminated in a 15 amp explosion proof plug.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.