|Lamp Type: LED||Class 1, Groups C and D|
|Watts: 21 Watts||Class II, Groups E and F (T3 Temp Rating)|
|Lamp Dimensions: 7.25"-Wide, 15" Height||Class III, Groups E, F and G|
|Lamp Weight: 9 lbs||IP67 (water proof)|
|Lumens: 1750||Suitable for Paint Spray Booths|
|LED Light Color: 2400K||T3C Temperature Rating|
|LED Lamp Life: 50,000+ hours||LEDs Driven at 90%|
|Voltage: 120-240 Volts AC 50/60hz - Optional 9-32VDC|
|Lighting Configuration: Steady Burn|
|Mounting: 3/4" Pendant Hub, Wall Mount, or Ceiling Mount|
|Temp Rating: T3C|
|Wiring: 3/4 inch Hub|
|Power Factor: 86%|
Made in the USA
The EPL-CM-21W-LED-24K Explosion Proof LED Light from Larson Electronics is UL rated Class I Division 1, Groups C & D and paint spray both approved. Waterproof and IP67 rated, this explosion proof LED light is available in pendant, ceiling, or wall mount options.
The effective and durable EPL-CM-21W-LED-24K explosion proof LED light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and an effective and durable hazardous location light solution is needed. This lamp can be equipped with seven Edixeon® 3 watt LED emitters to provide a variety of brightness and power options. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with a choice of mounting options and can be configured to operate with 120-240V AC 50/60hz. This fixture is also available in an optional low voltage 9-32 volts DC.
This hazardous area light carries a T3C temperature rating and is UL Listed Class I Groups C and D, Class II Groups E and F(T3 rating), and Class III, Groups E, F and G. This light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts.
NOTE: To retain paint booth approval requirements, only lamps of 150 watts or lower be used with this unit. At 21 watts, this LED unit is far below the 150 watt limit. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub.
The Edixeon® LEDs offer inherent LED resistance to shocks and vibrations, contributing to these units 15.6Grms rating of vibration tolerance and offer an outstanding life hours of 50,000+. The LED lamps used in this unit offer good power and economy and are energized by leads which pass through sealing compound that separates the lamp chamber from the wiring compartment. The lamp assembly is protected by an impact and heat resistant clear prismatic globe with heavy gauge aluminum reflector that affords excellent light control.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
We offer three different mounting options with this explosion proof light.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.