Larson Explosion Proof Emergency LED Light - Class 1, Class 2 Div 1 - Paint Spray Booth Cert - 2nd Gen LEDs

Larson ElectronicsSKU: PL3-EPL-EMG-24-2L-LED-G2
filler

Price:
Sale price$3,415.99

Description

PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1-844-787-5483 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
Made in the USA
The Larson Electronics EPL-EMG-24-2L-LED-G2 Explosion Proof Emergency LED Light Fixture is NRTL Listed for United States and Canada Class 1 Division 1 & 2, Class II Division 1 & 2, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical/petrochemical vapors or pulverized dust exist or have the potential to exist.
This 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.
The EPL-EMG-24-2L-LED-G2 is equipped with Larson Electronics’s specially designed LED T-series bulbs which produce 30% more illumination at 8 feet distance as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T8 bulbs.
With an integrated emergency ballast, this explosion proof LED light will continue to illuminate one bulb at for 90 minutes at 1470 lumens once the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged.
This fixture carries a T6 temperature rating and is Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G.
The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 30% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is NRTL Listed for United States and Canada for use in paint spray booths. .
Additional mounting options:
Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Standard Bracket Mounts:
Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.
Suggested Applications:
Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality
Superior LED Benefits
1. Each unit dialectrically tested.
1. 50,000 hour lifespan.

Specifications
NRTL Listed for United States & Canada
United States & Canada NRTL Listed for 
Lamp Type: LED
Dimensions: W-11.25" L-27.5" H-8.5 "
Weight: 32 Lbs
Voltage: Universal 120/277V 50/60Hz
Low Voltage (Optional): 12-24V DC
Total Watts: 30 watts
Total Lumens: 2,280
Luminous Efficacy: 98 Lumens per Watt
LED Lamp Life Expectancy: 50,000+ Hours
Color Temp: 5300K
Color Rendering Index: >75 CRI
Beam Angle: 150°
Lighting Configuration: Flood Pattern
Ambient Operating Temp Range: -30° C to 70° C
Operating Temp Range: -30° C to 70° CT6 rated
Mounting: Bracket Standard - Pendant Optional
Wiring Hub: 1/2 inch threaded

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed