|EPL-HB-150LED-RT-100-1523-SCAB Safety Cable Mount LED Light||Ratings/Approvals|
|Listing: United States - Canada||Listed for United States and Canada|
|Lamp Type: Cree LED||Class I, Divisions 1 & 2, Groups C and D|
|Dimensions: 14"H x 16"W 5"D||Class II, Divisions 1 & 2, Groups E,F,G|
|Weight: 40 lbs||Class III, Divisions 1 & 2|
|Voltage: 100-277 Volts AC, 50/60Hz||Certified to UL 844 Ed. 13|
|Total Watts: 150W||Certified to UL 1598|
|Total Lumens: 21,000||Certified to C22.2 No. 137 Rev 2009|
|Luminous Efficiency: 140 Lm/W||Certified to C22.2 No. 250.0|
|Lamp Life: 60,000+ Hours||T5 Temperature Rating|
|Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K||Paint Spray Booth Approved|
|Color Rendering Index: >75 CRI||IEC 60529 Tested|
|Beam Angle: 60°, 125°, or 140°||IP67 Rated Waterproof|
|Lighting Configuration: Flood Pattern||LEL Approved|
|NEMA Type (Lighting): 6H x 6V (60° Optics); 6H x 6V (125° Optics); 6H x 7V (140° Optics)||Multiple Driver Banks|
|IES Classification: Type I (60° Optics); Type VS (125° Optics); Type VS (140° Optics)||80% Lumen Retention after 60,000 Hours|
|Longitudinal Classification: Very Short (60° Optics); Very Short (125° Optics); Short (140° Optics)||Factory Sealed Light Fixture|
|Cutoff Classification: Cutoff||Recommended 15` to 40` Mounting Height|
|CIE Type: Direct|
|BUG Rating: B5-U1-G1 (60° Optics); B4-U1-G1 (125° Optics); B4-U1-G2 (140° Optics)|
|Power Efficiency: >95%|
|Power Factor: 0.992|
|Ambient Operating Temp Range:-50° C to +65°C|
|Operating Temp Rating: T5|
|Housing Material: Copper Free Cast Aluminum|
|Lens Material: Hardened Borosilicate Glass|
|Gasket Material: Silicone|
|Mounting: Swivel Mount w/ safety cables.|
|Safety Cable Length: 100`|
|Wiring: 100` 16/3 SOOW Cord w/ Explosion Proof Plug|
|Cord Cap: 15A 5-15P 125V EXP Plug|
|The Larson Electronics EPL-HB-150LED-RT-100-1523-SCAB Explosion Proof suspended light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older fixtures. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 explosion proof light fixture provides 21,000 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.|
The explosion proof LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twelve individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
Wiring & Plug: This explosion proof flood light is equipped with 100 foot of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an explosion proof cord cap for easy connection to explosion proof outlets. Plug options include a 5-15 15 amp straight blade plug for use with 120V explosion proof outlets. 20 amp plugs or pin/sleeve plugs are available upon request.
This explosion proof LED light fixture is IP67 rated, dust-proof, and protected against high pressure jets and temporary submersion. The cast aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronics.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.