Explosion Proof LED Dock Light - 50 Watt Light Head - 6' Pivoting Arm - 7000 Lumens - 347/480V AC - C1D1
Explosion Proof LED Dock Light - 50 Watt Light Head - 6' Pivoting Arm - 7000 Lumens - 347/480V AC - C1D1
| EPL-SBDL-V2-50RT-72-480V - Hazardous Location LED Dock Light | Ratings/Approvals |
| Listing: NRTL Listed for United States and Canada | Class I Division 1 |
| Lamp Technology: LED | NRTL Certified to UL 844 Ed. 13 |
| Dimensions: 7.04" L x 7.04" H x 5.72" - Light Head | NRTL Certified to UL 1598 |
| Weight: 50 lb | NRTL Certified to C22.2 No. 137 Rev 2009 |
| Voltage: 347/480 V AC, 50/60 Hz | NRTL Certified to C22.2 No. 250.0 |
| Total Watts: 50W | NRTL Certified to C22.2 No. 30-M-1986 Rev 2012 |
| Total Lumens: 7,000 lms | Replacement for 250W Metal Halide Lamps |
| Luminous Efficacy: 140 Lm/w | Surge Protection |
| Lamp Life: 60,000+ Hours | T5 Temperature Rating |
| Color Temp: 5600K, 4500K, or 3000K | Paint Spray Booth Approved |
| Color Rendering Index: >75 CRI | IEC 60529 Tested |
| Lamp Type: - | IP67 Rated Waterproof |
| Lamp Base: - | LEL Approved |
| Replacement Lamp: - | Single LED Driver |
| Beam Angle: 60°, 125°, or 140° | 80% Lumen Retention after 60,000 Hours |
| Lighting Configuration: Flood Pattern | Factory Sealed Light Fixture |
| Power Efficiency: >95% | |
| Power Factor: 0.99 | |
| Amps: 0.42A @ 120V, 0.21A @ 240V, 0.18A @ 277V | |
| Ambient Operating Temp Range: -50° C to +65°C |  |
| Operating Temp Rating: T5 |  |
| Temperature Rise: 11°C (10°F) Over Ambient |  |
| Housing Material: Copper Free Cast Aluminum |  |
| Housing Finish: Epoxy Powder Coated - Grey | Special Orders - Requirements |
| Lens Material: Hardened Borosilicate Glass | |
| Gasket Material: Silicone | |
| Mounting: 6' Swing Arm Mount - Aluminum | |
| Wiring: Internal Wiring Junction Box | |
| Hub: (1) 3/4" NPT |
The EPL-SBDL-V2-50RT-72-480V from Larson Electronics is an Explosion Proof LED Dock Light Fixture with Swing Arm Mount that provides operators with a powerful alternative to traditional luminaries in combustible facilities. Capable of replacing 250-watt metal halide lamps, this 50-watt low bay LED unit emits 7,000 lumens, carries an IP67 waterproof rating, and features an extended lifespan of 60,000+ hours. The factory sealed, hazardous location fixture is protected by a copper-free aluminum housing with an epoxy powder coated finish. The EPL-SBDL-V2-50RT-72-480V is equipped with a 6' swing arm mount.
The EPL-SBDL-V2-50RT-72-480V is a Class I, Division 1 hazardous location light fixture that is designed for energy efficient and superior illumination in combustible environments. This 50-watt low bay fixture offers 7,000 lumens of high quality light with a color temperature of 5600K. We also offer a 3000K warm white and 4500K natural white color temperature options (longer lead times may apply for non-standard temperatures). Serving as a suitable replacement for 250-watt metal halide lamps, a color rendering index of 75 ensures colors and details are produced more accurately than high pressure sodium or mercury vapor luminaries.
This low bay lighting solution for explosive sites is IP67 rated, dust-proof and protected against high pressure jets and temporary submersion. The copper-free aluminum alloy housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LEDs and electronic components. An epoxy powder coated finish facilitates durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000-hour rated lifespan with 80% lumen retention. The hazardous location low bay LED light also offers operators convenience in the form of field serviceability.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the EPL-SBDL-V2-50RT-72-480V to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights.
|
|||||||||||||||||||||||
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
