1 1

Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DC

Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DC

$5,862.00 CAD
$5,862.00 CAD
Sale Sold out
Shipping calculated at checkout.
Specifications / Additional Information
EPL-TN-CRN-RED Explosion Proof LED Light U.L. Ratings
Listing: United States - Canada Class I, Division 1 & 2, Groups C,D
Lamp Type: LED (Red) Class II Division 1 & 2, Groups F, G
Dimensions: W-13 1/4"  D-12 1/2"  H-11 1/2" Class III, Division 1 & 2
Weight: 21 Lbs UL 1598
Voltage: Universal 9-60 Volts DC UL 1598A - Marine Type (Saltwater)
Total Watts: 25 watts UL 844
Total Lumens: 2,250 CSA C22.2 No. 250, 94.0, 213.0, 137.0 & 30.0
Luminous Efficacy: 90 Lm/W NEMA 4X
LED Light Color: Red T4 Temperature Rating
LED Life Expectancy: 50,000 hours
Led Drive %: 90%
Amps: 2.09 @ 12V DC - 1.05 @ 24V DC
Operating Temp Range:T4 rated
Mounting: Permanent Mount Yolk
Wiring: 3/4" NPT
   
' Product Overview '
Made in the USA The Larson Electronics EPL-TN-CRN-RED Low Voltage Explosion Proof Red Crane LED Warning Spotlight is approved Class I & II, Division 1 & 2 and is rated for use in wet and marine environments. This red LED spotlight is designed to warn pedestrians and bystanders when in the path of an oncoming crane. This explosion proof LED light produces an 2,250 lumen output with low amp draw, 50,000 hour service life, and 9 to 60 volt compatibility providing operators with a versatile and powerful crane warning safety light. The EPL-TN-CRN-RED Red LED Crane Safety Light from Larson Electronics produces 2250 lumen of sharp red light while drawing 2.09 amps from a 12 volt electrical system five 5-watt red LED producing 450 lumens each are combined with high output parabolic reflector to produce a narrow 5° degree spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp runs cooler than halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace. Standard crane warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on cranes, depending on the position of the light, can be a hindrance to the crane operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system for cranes, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EPL-TN-CRN-RED addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This lamp can be easily adjusted up or down and locked into position via a side mounted adjustment knob. The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and marine environments. The EPL-TN-CRN-RED lamp assembly includes a 25 watt LED lamp with red LEDs in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp in this unit has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the be dropped or hit, unlike incandescent lamps which may break or shatter. Durability: This unit incorporates a 25 watt LED lamp assembly containing five 5-watt high output red LEDs producing 450 lumens each and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. The EPL-TN-CRN-RED operates on a range of voltages from 9-60 volts DC to provide a lighting solution for areas where explosion proof fixtures are required. This unit`s durability, easy mounting, high power and the good color rendering of its LED lamp make it ideal for close work and hazardous areas where safety, detail and accuracy are critical.
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Made in the USA Quality LED Benefits
1. High Efficiency and Output 70 Watt LED lamp. 2. 25 Watt Red LED Lamp Provides Cooler Operation. 3. Rugged Die Cast Aluminum Lamp Housing. 4. 3/4" Shock Resistant Tempered Glass Lens. 5. Copper Free Shell, Covers and Sealed Fittings. 6. Vibration/Impact Resistant Construction. 7. Low Maintenance. 8. Permanent Adjustable Yolk Type Mounting 9. 50,000+ Hour Lamp Life. 10. UL Listed for Marine Environments. 1. Long lamp life. 2. High efficiency and low amp draw after initial startup. 3. High durability and reliability. 4. High output and very good color rendering. 5. Vibration and shock resistant. 6. Low maintenance.
 

Shipping and delivery Information

Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.

For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.

The PuriLite Peace of Mind 30-day money back guarantee

Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.

1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.

If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.

Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!

Sustainability & Ethical Sourcing

At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.

♻️ Sustainable Practices

  • We prioritize durable materials that extend the product life cycle and reduce waste.
  • Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
  • Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.

🤝 Ethical Sourcing

  • We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
  • All suppliers are carefully vetted for compliance with environmental and ethical standards.
  • We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.

🌍 Our Ongoing Commitment

We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.

View full details
Product Product subtotal Quantity Price Product subtotal
Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DC
Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DCPL3-EPL-TN-CRN-RED
Explosion Proof Red Crane LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DCPL3-EPL-TN-CRN-RED
$5,862.00/ea		 $0.00
$5,862.00/ea $0.00