Explosion Proof Red Forklift LED Warning Spotlight - C1D1 - 25 Watt 2250 Lumen - 9-60V DC

LARSON ELECTRONICSSKU: PL3-EPL-TN-FKLT-RED
filler

Price:
Sale price$5,328.99

Description

Specifications / Additional Information
EPL-TN-FKLT-RED Explosion Proof LED Light Ratings/Approvals
Listing: United States - Canada Class I, Division 1 & 2, Groups C,D
Lamp Type: LED (Red) Class II Division 1 & 2, Groups F, G
Dimensions: W-13 1/4" D-12 1/2" H-11 1/2" Class III, Division 1 & 2
Weight: 21 Lbs UL 1598
Voltage: Universal 9-60 Volts DC UL 1598A - Marine Type (Saltwater)
Total Watts: 25 watts UL 844
Total Lumens: 2,250 CSA C22.2 No. 250, 94.0, 213.0, 137.0 & 30.0
Luminous Efficacy: 90 Lm/W NEMA 4X
LED Light Color: Red T4 Temperature Rating
LED Life Expectancy: 50,000 hours
Led Drive %: 90%
Amps: 2.09 @ 12V DC - 1.05 @ 24V DC
Operating Temp Range:T4 rated
Mounting: Permanent Mount Yolk
Wiring: 3/4" NPT
' Product Overview '
Made in the USA The Larson Electronics EPL-TN-FKLT-RED Low Voltage Explosion Proof Red Forklift LED Warning Spotlight is approved for Class 1 & 2, Division 1 & 2 and is rated for use in wet and marine environments. This red LED spotlight is designed to warn pedestrians and bystanders when in the path of an oncoming forklift. This explosion proof LED light produces 2,250 lumens during output with low amp draw, 50,000 hour service life, and 9 to 60 volt compatibility, providing operators with a versatile and powerful forklift warning safety light. The EPL-TN-FKLT-RED Red LED Forklift Safety Light from Larson Electronics produces 2,250 lumens of sharp red light while drawing 2.09 amps from a 12 volt electrical system. Five, 5-watt red LEDs producing 450 lumens each are combined with a high output parabolic reflector to produce a narrow 5° degree spread spot beam, providing a high intensity center beam which is visible during daytime and nighttime operations. The LED lamp runs cooler than halogen lamps, resulting in an easier and safer to handle unit and less heat in the workspace.
Standard forklift warning systems consist of strobe lights or audible alarms. Strobe lights may not always be visible with high illumination settings. The strobe lights on forklifts, depending on the position of the light, can be a hindrance to the forklift operator by reducing the visibility due to continual contrasting from the strobe light. Audible alarms, such as backup alarms, are the most disliked warning system for forklifts, especially operators and pedestrians within work forces that have to listen to this alarm continually throughout the work day. Both strobe lights and audible alarms are often ignored due to conditioning of the warning system from day to day exposure. The EPL-TN-FKLT-RED addresses both the above issues, providing a new system that is not obnoxious and will not get on the nerves of employees, while providing the warning indication required by OSHA to keep employees and pedestrians within the work force safe. This lamp can be easily adjusted up or down and locked into position via a side mounted adjustment knob. The lamp housing is waterproof and constructed of thick copper free aluminum alloy, making it ideal for use in wet and marine environments. The EPL-TN-FKLT-RED lamp assembly includes a 25 watt LED lamp with red LEDs in a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp in this unit has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should it be dropped or hit, unlike incandescent lamps which may break or shatter. Voltage: The drivers in this unit provide the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED lights can operate on current ranging from 9 to 60V DC without any modifications necessary as a result. (347-480V AC and 120-277V AC available upon request). This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in electrical systems which would otherwise result in burning up or premature LED failure without it. Durability: This unit incorporates a 25 watt LED lamp assembly containing five, 5-watt high output red LEDs producing 450 lumens each and a copper-free cast aluminum housing with a thermoset powder coat finish. The shell, covers and sealed fittings are also made of copper-free aluminum. The lens is constructed of 3/4" thermal shock and impact resistant tempered glass and the housing contains threaded joints lubricated with non-drying lubricant. The LED lamp assembly has no filament and is thus highly resistant to damage from shocks or impacts, greatly reducing the chances of damage should the lamp be dropped or hit, unlike incandescent lamps which may break or shatter. The lamp is rated at 50,000+ hours of life, providing longer service life than typical halogen lamps. The EPL-TN-FKLT-RED operates on a range of voltages from 9-60 volts DC to provide a lighting solution for areas where explosion proof fixtures are required. This unit`s durability, easy mounting, high power and good color rendering of its LED lamp makes it ideal for close work and hazardous areas where safety, detail and accuracy are critical.
Click Photo to Enlarge
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or “duty cycle” accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED’s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Made in the USA Quality LED Benefits
1. High Efficiency and Output 70 Watt LED lamp. 2. 25 Watt red LED Lamp Provides Cooler Operation.. 3. Rugged Die Cast Aluminum Lamp Housing. 4. 3/4" Shock Resistant Tempered Glass Lens. 5. Copper Free Shell, Covers and Sealed Fittings. 6. Vibration/Impact Resistant Construction. 7. Low Maintenance. 8. Permanent Adjustable Yolk Type Mounting 9. 50,000+ Hour Lamp Life. 10. UL Listed for Marine Environments. 1. Long lamp life. 2. High efficiency and low amp draw after initial startup. 3. High durability and reliability. 4. High output and very good color rendering. 5. Vibration and shock resistant. 6. Low maintenance.
 

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed