|Lamp Type: LED||Class I Division I & II, Groups C & D|
|Dimensions: 28.67"-H, 33.50"-W||Class II Division I & II, Groups E,F,G|
|Watts: 30||Class III|
|Materials: Copper Free Aluminum Housing||IP67 Waterproof Rating|
|Voltage: 120/277V AC||UL 844|
|Lighting Configuration: Dual 6 Watt LED Bulbs||UL 924|
|Mounting: Wall Mount/Flat Surface Mount||T3C Temperature Rating|
|Wiring: 1/2" NPT Threaded for Conduit||NFPA101 (Life Safety Code)|
|U.L. Listing: U.S. Explosion Proof|
|Battery Backup: High Temp Nickel-Cadmium|
|Battery Input Voltage: (Dual) 120/277V AC @ 60Hz|
|Unit Life Expectancy: 10 years|
|Battery Backup Runtime: 90 Minutes|
|Battery Output Voltage: 12V DC Nominal|
|Battery Output Current: 1000mA (Constant)||Toll Free: 1-800-369-6671|
|Battery Output Power: 12 Watts (Max)||Intl: 1-214-616-6180|
|Battery Operating Temp: 0 - 50C||Fax: 1-903-498-3364|
|Battery Recharge Time: 24 hours from full discharge||E-mail:|
Made in the USA
The EXP-EMG-EXT-12W-3L-1XRH-7X7 Explosion Proof Emergency Light with back up emergency battery and exit sign from Larson Electronics is rated Class I Division 1 Class II Division I & II and is an ideal emergency lighting solution for hazardous locations where failsafe lighting reliability is a must.
The EXP-EMG-EXT-12W-3L-1XRH-7X7 is an ideal solution for operators who wish to ensure their hazardous workspaces employ the most effective and reliable safety lighting options available. Under normal conditions this emergency lamp uses normal external power to illuminate its three 10 watt LED lamps. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for 90 minutes or until power is restored. Once power is restored a built in charger will return the unit to a fully charged state within acceptable UL time limits.
The EXP-EMG-EXT-12W-3L-1XRH-7X7 explosion proof emergency light features two exit lamp heads. The additional lamps head is connected to the main assembly via rigid conduit. The extra exit lamp head on this explosion proof emergency light with back up emergency battery is mounted 7 feet out to the side and then 7 feet down from there.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
This explosion proof emergency exit lighting fixture carries an integral maintenance-free, sealed, high temperature Nickel-Cadmium battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the LED bulbs for 90 minutes. The battery is protected from deep discharge by solid state circuitry which senses low voltage and turns off the unit before battery damage can occur.
This emergency exit light is multi-voltage capable and can operate with voltages ranging from 120V to 277V@ 50/60HZ. This unit`s housing and LED light fixtures are constructed of copper-free aluminum that is epoxy powder coat finished to protect the aluminum surfaces. The EXP-EMG-EXT-12W-3L-1XRH-7X7 can withstand temperature variances ranging from 0°C to 40°C and its low maintenance design offers up to ten years of operational life. An integrated pilot light indicates the presence of AC current and a test switch allows easy confirmation of proper emergency operation.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.