|EXP-EMG-LE6-1L-MOD1.PM Explosion Proof Paint Mode Warning Sign||Ratings/Approvals|
|Listing: United States & Canada||Listed for United States & Canada|
|Lamp Type: LED||Class I, Divisions 1 & 2, Groups B, C, D|
|Dimensions: 25€H x 13€W x 4.5€D||Class I, Zones 1 & 2, Groups IIB+H2, IIA|
|Voltage: 120/277VAC||Class II, Divisions 1 & 2, Groups E, F, G|
|Watts: 1.1||Class III, Divisions 1 & 2|
|Lighting Configuration: Back Illuminated Sign Panel||NEMA 3R, 4, 7 (B, C, D), 9 (E, F, G)|
|Battery Backup Runtime: 3 Hours||NRTL Listed to UL 508A|
|Battery Backup: Nickel Cadmium Battery Pack||NRTL Listed to UL 1203|
|Materials: Copper Free Aluminum Housing||NRTL Listed to CSA C22.2 No 14, 25, 30|
|Mounting: Ceiling Mount, Pendant Mount, Wall Mount||3 Hour Emergency Runtime|
|Wiring: 3/4" NPT Wiring Hub||Self-Testing Unit|
|Toll Free: 1-800-369-6671|
Made in the USA
The EXP-EMG-LE6-1L-MOD1.PM Explosion Proof Paint Mode Warning Sign with emergency battery back up from Larson Electronics is Class I, Divisions 1 & 2, Groups B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F, G and Class III Divisions 1 & 2 rated for hazardous areas. Equipped with a 1.1 watt LED lamp, a 3 hour runtime and self diagnostic system, this failsafe paint mode warning sign is designed for use in industrial environments and indicates when painting is underway. This single sided sign is an ideal marking solution for hazardous locations where failsafe reliability is a must.
The EXP-EMG-LE6-1L-MOD1.PM is an effective option for operators who wish to ensure their hazardous workspaces employ the most up to date and reliable means of marking paint mode status. Under normal conditions this emergency paint mode lamp is turned on by operators with a customer provided signal, illuminating the paint mode sign in green. In the case of power outages or in any situation where power is interrupted, this unit automatically switches to a battery backup which will power the unit for three hours or until power is restored. This fixture has three mounting options and is multi-voltage capable.
Light Features: The EXP-EMG-LE6-1L-MOD1.PM features a backlit LED array that each contain eight LEDs, drawing a total of 1.1 watts. This explosion proof emergency LED fixture features brown-out, short circuit and voltage surge protection and has a low voltage disconnect which prevents damage to the battery caused by a deep discharge. This self-testing LED fixture will run for a minimum of 3 hours after a power failure thanks to the maintenance-free 3.6 volt NiCad battery. After emergency use, the battery takes 24 hours to completely recharge.
This paint mode marking fixture is explosion proof and carries an integral battery backup power supply. When external power is cut due to outages or accidents this lamp automatically switches to its battery backup which will power the lamp for three hours, longer than the requirements specified in the NFPA 101. The EXP-EMG-LE6-1L-MOD1.PM sign panel is back illuminated by LEDs and as a result draws only 1.1 watt of power and has an extreme LED luminary lifespan rated at 15 years. This fixture is approved for outdoor use and is resistant to saltwater making it suitable for use in marine environments.
Emergency Operation: The EXP-EMG-LE6-1L-MOD1.PM features a backup battery that will run the fixture for at least 90 minutes following a power outage or any other loss of power. The included emergency backup battery is a 3.6 volt NiCad rechargeable unit. These batteries are maintenance-free and have a life expectancy of 15 years while being able to operate in a wide variety of conditions including in temperatures ranging from 0°C to +40°C. This unit also features a low voltage disconnect. This means that if the fixture detects that the battery`s terminal voltage has fallen below a certain level, the low voltage circuit will disconnect the emergency lighting load until normal power is restored. This prevents the battery from experiencing a deep discharge and becoming damaged.
Wiring: The EXP-EMG-LE6-1L-MOD1.PM explosion proof emergency self-testing LED fixture is NOT a factory sealed fixture. Operators will bring their own wiring to a junction box and complete their connects. The operator will also provide their own seal off for this fixture. The EXP-EMG-LE6-1L-MOD1.PM operates on 120/277V AC at 60Hz.
Mounting: The EXP-EMG-LE6-1L-MOD1.PM is designed to be surface mounted to flat surfaces such as walls. The unions connecting the upper lamps to the lower indicator light enclosure allow for both horizontal and vertical adjustment. This gives operators the ability to adjust the light to their specific mounting location for ideal light coverage during a power failure or power outage.
Suggested Applications: The EXP-EMG-LE6-1L-MOD1.PM is designed to for use within hazardous environments to mark the status of painting.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.