40W UV Excimer Light w/ Ballast - 222nm Far UVC Disinfection - Surface Mount - Quartz Glass/Ozone Free
40W UV Excimer Light w/ Ballast - 222nm Far UVC Disinfection - Surface Mount - Quartz Glass/Ozone Free
Sold by: LARSON ELECTRONICS
| FRL-EMX-6-40W-FUVC-KT UVC Sanitation Lamp - Ozone Free | Ratings/Features |
| Lamp Technology: Far UV-C Excimer | 222nm Germicidal Light |
| Dimensions: 4.25"-L x 1.69"-H x 1.41"-OD | Kills 99% of viruses and other germs |
| Weight: - | Mercury Free Lamp |
| Voltage: 120V and 240V | Instant-On Lamp, No Warm Up Time |
| Frequency: 60Hz | More Efficient & Effective than UVC Lamps |
| Total Watts: 40W | No Harmful UVC Emissions |
| Total UV Output: - | No Block Off/Bandpass/Cutoff Filters) Needed |
| Effective UV Intensity: 40 uW/cm2 @ 1.57" | Skin Safe & Eye Safe |
| Expected Lifespan: 10,000+ Hours | Ozone Free |
| UV Wavelength: Far UV-C, 222nm | Low Heat Output |
| Lamp Type: - | EPA Reg. No 98409-1 |
| Lamp Base: - | EPA Est. No. 98409-TX-1 |
| Replacement Lamp: - | |
| Beam Angle: 360º | |
| Light Configuration: Flood | |
| Remote Driver: Included | |
| Amps: - |  |
| Ambient Operating Temp Range: - | Special Orders - Requirements |
| Materials: - | |
| Lens Material: Quartz Glass | |
| Mounting: Surface | |
| Wiring: - | |
| Cord Cap: - | |
| ***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * |
| This unit is Made In USA - Manufactured in Texas The Larson Electronics FRL-EMX-6-40W-FUVC-KT UV Excimer Light can disinfect 99% of viruses, bacteria, mold and spores in facilities and on surfaces. This ozone-free unit offers 222nm UV-C output and comes with a remote driver. Considered to be eye and skin safe, the far-UV lamp offers instant start and cool operation. The remote driver, which operates on 120V and 240V 60Hz, is included with the lamp. ***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria. * The FRL-EMX-6-40W-FUVC-KT is a powerful sanitation solution that has eye and skin safe features for industrial sites and commercial facilities. This 40-watt excimer lamp offers 40 uW/cm2 UV intensity at 222nm UV wavelength. The ozone-free light has an expected lifespan of 10,000+ hours and emits a flood beam pattern with 360 degrees of coverage. This UV light is protected by a quartz glass. The far-UV light can disinfect over 99% of viruses, bacteria, mold and spores. Adhering closely to recommended exposure time for viruses, multiple lights can be purchased to cover larger areas quicker. This lamp is considered to be eye and skin safe (the 222nm UV wavelength cannot penetrate the eyes and skin of humans), making applications suitable in occupied areas requiring sanitation. Designed for cool operation, the instant-start light is efficient at eliminating harmful microbes, viruses and bacteria at low doses. Benefits of Excimer Far UV Lamps: When it comes to Far-UV lamps, there are few options in the skin-safe and eye-safe wavelengths. Similar to LED lamps, excimer lamps provide “instant-on†startup, and do not require a warmup period; excimer lamps are at 100% peak output when switched on. Most lamp technologies that do product UVC use mercury in the manufacturing process. Excimer lamps have ZERO mercury, making them more environmentally friendly. Excimer lamps can be tuned to specific wavelengths (222nm wavelength for this product) and produce no harmful UVC radiation or wasteful visible light and infrared light. Excimer lamps are more efficient at converting electricity (input power) into UV irradiance, which reduces the heat output from excimer lamps over other technologies. Fluorescent, amalgam, low-pressure mercury, and high-pressure mercury lamps do not product as tight of a wavelength and generate more heat, both of which wastes energy for the UV sanitation application. Excimer lamps have a higher average UV irradiance per square inch and have a higher photon emission over other lamp technologies. Being safe for use in occupied areas, instant-on power, mercury free, higher UV output, and low heat output make Far-UV excimer lamps the preferred choice for UV sanitation and disinfecting applications. Voltage: The FRL-EMX-6-40W-FUVC-KT is compatible with 120V AC and 240V AC, 60Hz. Cooled by natural air, the remote driver is included with the far-UV lamp. Mount: The UVC lamp can be mounted on flat surfaces via four tabs at each corner. The remote driver also contains tabs at each corner for surface mounting installations close to the light. Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information. Suggested Applications: Sanitation, disinfection, commercial locations, industrial parks, medical centers, labs, manufacturing and semiconductors; kills 99% of viruses, bacteria, mold and spores. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
