The GAU-AP-48-IPS-LED-RGB is a powerful outdoor color changing sign that is suitable for use in harsh environments. These units are configured in a 48" long strip or "bar" profile, which facilitates horizontal or vertical configurations. This energy-efficient LED light is designed for long-term applications, where a sign or landmark must be illuminated for extended periods of time. We offer this light in a 30° spot or 100° flood beam configuration. The 30° spot version is recommended for illuminating signs at far distances or casting concentrated light at surfaces. The 100° flood model provides a wide beam spread for large signs or illumination at close distances. To suit specific exterior sign lighting requirements, we can add the following features to this light (customization may incur additional cost): light guards, pole mounting, solar power, switches, sensors, cords, and more.
An IP65 rated extruded aluminum housing with a tough powder coat finish allows the unit to operate continuously in harsh environments, including areas that experience fluctuating temperatures, constant exposure to water/moisture and rough outdoor elements. This level of protection is recommended for making safety or warning signs more reliable in rugged work sites.
The LEDs in this linear light are RGB LEDs that can be adjusted to any color on the RGB color wheel. Operators use a wireless WiFi remote control to set the unit to their desired color. These RGB LEDs provide over 125 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. This LED light produces 5,000 lumens and features colors and details that are much more accurate than incandescent, halogen, or fluorescent light fixtures.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The exterior sign light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing ingress protection against dust and protection against low pressure jets of water from all directions. This design is weatherproof, suitable for indoor or outdoor applications, and ideal for areas where wet, damp, or dusty conditions are commonly encountered.
This light operates on 12-24 V AC/DC electrical current. The voltage range is intrinsically safe, which reduces fire-related risks and improves safety when installed in harsh environments, outdoor locations and rugged sites. Each strip light is equipped with 6 feet of 16/2 SOOW cable for making power connections.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170° vertically for best placement. Once installed, operators simply rotate the light fixture side to side to position the light output as needed. This outdoor light can be installed above or under signs.
Exterior signs, harsh environments, industrial sites, outdoor signs, landmarks, indoor signs, flood light and more.
Contact email@example.com for more information about our custom options tailored to meet your specific industry needs.
Listing: NRTL Listed for United States and Canada
Lamp Technology: RGB LEDs
Dimensions: 48"-L x 2.68" -W x 1.69"-D
Weight: 3.5 lb
Voltage: 12-24 V AC/DC
Total Watts: 40W
Total Lumens: 5,000 lms
Luminous Efficacy: 125 Lm/W
Lamp Life: 50,000+ Hours
Color Temp: -
Color Rendering Index: >75 CRI
Lamp Type: -
Lamp Base: -
Replacement Lamp: -
Beam Angle: 30° Spot or 100° Flood
Lighting Configuration: Spot or Flood Pattern
Power Efficiency: >95%
Power Factor: 0.992
Amperage: 1.67 A @ 24 V
Ambient Operating Temp Range: -40° C to +60°C
Housing Material: Extruded Aluminum
Housing Finish: Powder Coated - Black
Lens Material: Polycarbonate
Remote: Wireless WiFi Remote Control
Color Options: Any Color From the RGB Color Wheel
Mounting: Adjustable Swivel Mount Surface Bracket
Wiring: 6' 16/2 SOOW w/ Flying Leads
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.