The Larson Electronics GAU-AP-48-IPS-LED-UCL Industrial LED Cabinet Light is a long-lasting solution for control cabinets inside industrial buildings. This powerful 48" long LED strip light produces 5,000 lumens and operates on 12-24V AC/DC. The entire assembly weighs 3.5 lbs and measures 48 inches in length, 2.68 inches wide and 1.69 inches deep, making it ideal for mounting around tight spaces with horizontal or vertical placement.
The GAU-AP-48-IPS-LED-UCL offers reliable illumination for control cabinets and industrial enclosures. These units are configured in a 48" long strip or "bar" profile for installation in cabinets that host different types of equipment. The LED light is solid state and the beam does not contains heat or UV, which ensures cool operation around sensitive electronics during use. Quality and accurate light output also reduces color degradation. For operators, this decreases errors related to wiring, machine servicing, configuring equipment and monitoring. We offer this light in a 30° spot or 100° flood beam configuration to cater to different types of cabinets, rack configurations and horizontal/vertical lighting preferences. To suit specific industrial cabinet standards, we can add the following features to this light (customization may incur additional cost): magnetic mounting, clips, daisy chain, frosted lens, motion sensors, and more.
The LEDs in this linear light are Cree LEDs that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 125 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. This LED light produces 5,000 lumens with a color temperature of 5000K and a color rendering index of 75 which produces colors and details much more accurately than incandescent, halogen, or fluorescent light fixtures.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The industrial cabinet light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing ingress protection against dust and protection against low pressure jets of water from all directions. This design is weatherproof, suitable for indoor or outdoor applications, and ideal for areas where wet, damp, or dusty conditions are commonly encountered.
This light operates on 12-24V AC/DC electrical current. The voltage range is intrinsically safe, which reduces fire-related risks and improves safety inside cabinets that contain power equipment. Each strip light is equipped with 6 feet of 16/2 SOOW cable for making power connections.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170° vertically for best placement. Once installed, operators can rotate the light fixture side to side to position the light output as needed. This solution enables mounting in tight spaces, including enclosures. The mounting bracket is also seamless to install, resulting in reduced time spent on maintenance and servicing.
Control cabinets, data centers, industrial panels, power boxes, equipment cabinets, industrial enclosures and more.
Contact email@example.com for more information about our custom options tailored to meet your specific industry needs.
Listing: NRTL Listed for United States and Canada
Lamp Technology: LED
Dimensions: 48"-L x 2.68" -W x 1.69"-D
Weight: 3.5 lbs
Voltage: 12-24V AC/DC
Total Watts: 40W
Total Lumens: 5,000 lms
Luminous Efficacy: 125 Lm/W
Lamp Life: 50,000+ Hours
Color Temp: 5000K
Color Rendering Index: >75 CRI
Lamp Type: -
Lamp Base: -
Replacement Lamp: -
Beam Angle: 30° Spot or 100° Flood
Lighting Configuration: Spot or Flood Pattern
Power Efficiency: >95%
Power Factor: 0.992
Amperage: 1.67A @ 24V
Ambient Operating Temp Range: -40° C to +60°C
Housing Material: Extruded Aluminum
Housing Finish: Powder Coated - Black
Lens Material: Polycarbonate
Mounting: Adjustable Swivel Mount Surface Bracket
Wiring: 6` 16/2 SOOW w/ Flying Leads
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.