The Larson Electronics GAU-GCL-48-IPS-LED-E2E-R1-DCL Outdoor LED Fixture for Garden Centers is a superior lighting solution that is approved for indoor and outdoor environments, as well as wet locations and areas requiring a durable, waterproof and long-lasting light source. This powerful 48" long LED strip light produces 5,000 lumens and operates on universal 120-277V AC. The IP68 rated, solid-state light is compatible with daisy chain configurations (up to 25 units) and is protected by an aircraft grade anodized aluminum housing.
The GAU-GCL-48-IPS-LED-E2E-R1-DCL 40-watt low profile strip light provides high output and a durable lighting solution for applications where waterproof lighting is required. These DCL listed units are configured in a 48" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. Once installed, operators can rotate the light fixture side to side to position the light output as needed. The high output, cool running operation, and exceptional color rendering properties of this light makes it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
The LEDs in this linear light are Cree LEDs that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 125 lumens per watt output and have 98% lumen retention at 10,000 hours, 85% lumen retention at 50,000 hours and 70% lumen retention at 65,000 hours (calculated at 12 hours use/day), giving them better efficiency and operational life than comparable LEDs. This LED light produces 5,000 lumens with a color temperature of 4000K. We offer a 3000K model for dark sky compliance. The 3000K model is designed for outdoor installations in locations that require dark sky compliance for city regulations. Average foot-candle distribution from a height of 10 feet is 24 fc. This LED fixture offers a color rendering index of 85 or greater (with R9 > 25 and R9-R12 >59 averaged).
A 85-degree beam angle with full cutoff lens and internal reflector keeps light distribution downwards, which reduces light spillage. A UV and shatter resistant acrylic lens provides > 90% optical clarity (< 3% loss of optical clarity after 10 years of exposure to sunlight). This component has higher optical clarity than polycarbonate.
The weatherproof LED light is constructed of aircraft grade anodized aluminum for high strength. Color options for the anodized coating include: black, white, silver or grey. The hard anodized coating promotes corrosion resistance and deters discoloring, while the metal structure helps increase the lifespan of the fixture, improves heat dissipation and offers long-term durability (not susceptible to breaking or cracking, as the material can withstand years of UV exposure). The housing is IP68 rated for temporary submersion up to 3 meters underwater. This design is weatherproof and ideal for areas where wet, damp, or dusty conditions are commonly encountered. With a -40°C to +60°C ambient temperature operating range and 0-92% relative humidity operating range, the LED fixture can operate inside freezers, indoors and outdoors. The unit is NRTL listed for wet locations and is approved for hosedown applications, where the light is sprayed with pressurized water hoses on a regular basis.
We offer a Class I, Division 2 certified model for this LED fixture for use in hazardous locations (at an additional cost).
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting.
The LED fixture is compatible with single-phase 120-277V AC, 50/60 Hz. This wide voltage and frequency range enables the unit to be used in domestic and international markets regardless of local voltage. For businesses, this feature allows one product to be used in all stores. An integrated LED driver can be found inside the light's housing (no external power supply needed). The internal driver is field serviceable and can be replaced in the field in the event of failure.
The GAU-GCL-48-IPS-LED-E2E-R1-DCL comes with 6 feet of 14/3 SEOW power cord, which is UV, chemical and abrasion resistant as well as designed for harsh environments, with vulcanized rubber molded plug ends for waterproof connections. Dual, screw-on connectors are available at both ends of the fixture for plug-and-play, daisy-chain connections. Up to 25 units can be connected together and receive power from a single source. Maximum spacing between each light with the included cord is 6 inches (we offer additional cord sets for extended spacing or length requirements). A closed plug on the output side of the fixture is included, if wiring is not required on the output.
Mounting for this unit is provided by two standard C-clamp brackets that snaps into the back of the fixture. With this mounting solution, installation can be completed by one person using a drill. Access to the fixture is also easier, which makes servicing, maintenance and replacement faster. The entire assembly weighs 2.75 lbs and measures 48.58 inches in length, 1.83 inches wide and 1.78 inches in height (2.19" in height with the bracket installed). This compact LED light ideal for mounting in areas where space is limited and a low-profile fixture is more suitable to accommodate the area.
This light is ideal for indoor or outdoor applications and industrial or commercial operations where wet conditions are commonly encountered, including garden centers, walkways, occupied areas and more.
Contact firstname.lastname@example.org for more information about our custom options tailored to meet your specific industry needs.
Lamp Technology: LED
Dimensions: 48.58"-L x 1.83"-W x 1.78"-H (2.19"-H w/ bracket installed)
Weight: 2.75 lbs
Voltage: 120-277V AC 50/60 Hz
Total Watts: 40W
Total Lumens: 5,000 lms
Luminous Efficacy: 125 Lm/W
Lumens per Foot: 1250 Lm/Ft
Lamp Life: 65,000+ Hours (L70)
Color Temp: 4000K
Color Rendering Index: >85 CRI (R9 > 25,R9-R12 >59)
Beam Angle: 85° Flood
Lighting Configuration: Full Cutoff
Power Efficiency: >95%
Power Factor: 0.992
Amperage: 0.34A @ 120V, 0.17A @ 240V, 0.15A @ 277V
Ambient Operating Temp Range: -40° C to +60°C
Relative Humidity Range: 0-92%
Housing Material: Aircraft Grade Extruded Aluminum
Housing Finish: Anodized - Black, White, Grey, or Silver
Lens Material: Acrylic (UV Resistant)
Optical Clarity: >90%
Mounting: Back Mounted Detachable Surface Mount C Clips
Wiring: Plug & Play - 6' 14/3 SEOW Flexible Cord w/ Weatherproof Screw-on Connector
Daisy Chain Capable: Yes, Includes Output Connector for Daisy Chain Connecting up to 25 Units
Warranty: Yes - 5 Years* - 10 Year / 100,000 Lumen Available**
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.