|GAU-HB-2X200W-LED-WP High Bay LED Light||Features|
|Lamp Type: LED||Listed forÂ United States and Canada|
|Dimensions: 38" L X 17" W X 12" H||Certified to UL 1598|
|Total Watts: 400W||Certified to C22.2 No. 250.0|
|Lumens: 44,000||IP65 Waterproof|
|Voltage: Universal 100-277V AC 50/60Hz||Protected Against High Pressure Jets and Temporary Submersion|
|Lighting Configuration: Flood Pattern|
|Mounting: Adjustable Trunnion Mount with 12" Brackets|
|Weight: 44 lbs|
|Temp Rating: -40Â°C to +65Â°C|
|Color Temp: 5000K or 4000K,Â 85 CRI||Toll Free:Â 1-800-369-6671|
|Housing Materials: Aluminum||Intl:Â 1-903-270-1187|
|Housing Colors: Black or Grey||E-mail:Â|
|The Larson Electronics GAU-HB-2X200W-LED-WP Waterproof LED High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional general area luminaries. The advanced LED technology waterproof design makes this lamp an excellent energy efficient upgrade option for bulky and high maintenance cost fixtures. This 400 watt LED high bay light fixture provides 44,000 lumens of high quality light while drawing only 400 watts and is ideal for use in warehouses, garages, production lines and anywhere an effective and efficient general area lighting solution is needed. AÂ polycarbonate lens protects the LED light assembly and the aluminum alloy body reduces weight compared to larger metal halide and high pressure sodium fixtures. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 80% lumen retention. A light 24 lbs weight and low profile make this unit an attractive and energy efficient alternative to larger and heavier older light fixtures and requires less hardware to install. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. LED Drivers: Even in LED fixtures, heat is the single largest factor in premature light failure and color shifting. As a result, many manufacturers reduce the output of their LEDs in order to reduce the amount of heat produced. Rather than lower light output or quality, Larson Electronics addresses this problem with the addition of an electronic LED driver. This internal driver provides the ability to automatically monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This not only reduces the energy dissipation, effectively lowering the operating temperature of the fixture, but also prevents AC over-voltage and short circuit loading making this fixture virtually maintenance free. Because the electronic driver allows the GAU-HB-2X200W-LED-WP to run at a cooler internal temperature and regulates the electrical current, energy efficiency and LED service hours are maximized while at the same time reducing operating costs and downtime incurred from the frequent servicing intervals required with other hotter running lights. The LED light fixture features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. With the GAU-HB-2X200W-LED-WP series of LED lamps from Larson Electronics, each LED fixture contains twelve individual LED boards configured in a series of six banks. Each bank contains two LEDs on a single board with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event of an LED failure, the mating LED will continue to operate. Cree Specific: These lamps use Cree LED units that have been chosen for their high lumen per watt ratio and extreme longevity. These Cree LEDs generate a robust 110 lumens per watt effective lumen output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources. Field Serviceability: This LED light fixture is field serviceable. All major internal components can be purchased from Larson Electronics and installed by a licensed electrician with basic tools. With most explosion proof fixtures, the fixture must be returned to the manufacturer for repair work, which presents downtime and long turn around times for repair work. Larson Electronics addresses this issue with the GAU-HB-2X200W-LED-WP series with field serviceability, allowing operators to perform service work without having to return the fixture to the manufacturer in the event of damage or failure.|
This LED light is multi-voltage capable and can be operated with 100-277 VAC, 50/60Hz without any need for a special ballast. The aluminum body and LED luminaries give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED light fixture produces 44,000 lumens of light with a color temperature of 5000K or 4000KÂ and a color rendering index ofÂ 85 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. The LEDs used in this light use less energy and create less heat which reduces energy costs by lowering the amount of electricity needed to both illuminate and cool large areas.
Mounting: The GAU-HB-2X200W-LED-WP can be mounted via a 12" adjustable trunnion mounting bracket.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.