Larson 8 Watt Strobing LED Light Fixtures for Hazardous Location Illumination - 2Hz Flash Rate - C1D2

Larson ElectronicsSKU: PL3-HAL-13-8W-LED-STRB-2HZ

Sale price$2,527.99


PuriLite suggests you place an order directly with us for large Larson orders due to the potential customization requirements. Please call us at 1-844-787-5483 to place your order. If you prefer to place your order online, a PuriLite agent will be in touch with you to discuss any custom options.
Buy American Compliant
The Larson Electronics HAL-13-8W-LED-STRB-2HZ is a low voltage hazardous location LED strobe light approved for Class1 Division 2 environments and U.L. 1598 compliant for use in wet locations. This powerful LED strip light produces 442 lumens, operates from 12 or 24 VDC, flashes at a frequency of 2HZ, and is suitable for a
of applications.
The HAL-13-8W-LED-STRB-2HZ is designed to provide a high strobing output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. This low voltage hazardous area light can be operated with either 12 or 24 volt DC (choose below) current and includes 6 feet of connecting lead with standard two wire configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP54 for protection against exposure to water spray and limited dust ingress. These units are configured in a 13" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen light fixtures.
The HAL-13-8W-LED-STRB-2HZ hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and l protection against light water spray such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered.
The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. These fixtures are offered with a clear or frosted lens. The frosted lens helps diffuse the light, providing a more even spread. The clear lens will provide no diffusion.
Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 13.4 inches in length and 2.68 inches wide and 1.69" deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
These hazardous location LED lights are equipped with 6 feet of cord containing a standard two wire (White+ Black-) connecting configuration and terminated in an explosion proof 5-15 15A straight blade plug. These lights are not multi-voltage; each light is preconfigured for 12 or 24 volt DC current at 8 watts .66 amps on 12 VDC and .33 amps on 24 VDC.
The HAL-13-8W-LED-STRB-2HZ is ETL approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP56 waterproof rating ensuring protection against limited ingress from dusts, dirt, oils and full protection against water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.

Lamp Type: LED
Dimensions: Lamp 13.38"-L 2.68" -W 1.69"- D
Weight: 0.7lb | 0.3 k g
Watts: 8.4
Voltage: 12 VDC (11-16V DC) - 24 VDC (22-28V DC)
Lumens: 442
Lamp Life Expectancy: 100,000 Hours
CRI: 75
Frequency: 2 HZ
Amps: 0.66 A @12 VDC | 0.33 A @ 24 VDC
Light Color: 6500K
Beam Type: 100° Flood or 30° Spot 
Mounting: 1/4” - 20 Screws /Aluminum 1” Yoke
Temp Range: -40°C – +85°C
Wiring: 6Ft Lead | White: + Black: -
Cord Cap: 5-15 15A Straight Blade Plug - Explosion Proof

Shipping and delivery Information


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed