|HAL-36-25W-LED-TXF-50C Hazardous Location LED Lighting
|Lamp Type: LED
|Class 1 Division 2 Groups A,B,C,D
|Dimensions: Lamp 35.88"-L 2.68" -W 1.69"- D
|CSA 22.2 No. 250.0
|Weight: 4 lbs
|IP54 Ingress Protection
|Voltage: 120-240V AC stepped down to 24V DC
|T3 Temperature Rating
|120/240v stepped down to 24V
|Lamp Life Expectancy: 100,000 Hours
|C1D! Inline Transformer
|Amps: 0.21A @ 120 VAC - 0.11A @ 240 VAC
|Light Color:Â 6500KÂ
|Beam Type: 100Â° Flood
|Mounting: Standard Triangle End Brackets
|Temp Range: -40Â°C â€“ +85Â°C
|Wiring: 50` 16/3 SOOW, inline transformer, 5` 16/3 SOOW, cord cap
|Cord Cap: NEMA 5-15 (125V) or NEMA 6-20 (250V)
|3 year warranty replacement on this LED light. After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics will provide a return label via email to the customer. When the failed light is returned, Larson Electronics will ship a new replacement.
Buy American Compliant
The Larson Electronics HAL-36-25W-LED-TXF-50C is a low profile hazardous location lighting solution approved for Class 1 Division 2 environments andÂ UL 1598 compliant for use in wet locations. This powerful 36" long LED strip light produces 1812 lumens, operates from 120 to 240 VAC, and is suitable for a variety of applications. This LED strip light operates on standard 120/240V AC stepped down to 24V DC via the inline stepdown transformer, and is fitted with 50` of 16/3 SOOW cable and terminated in an explosion proof cord cap.
The HAL-36-25W-LED-TXF-50C is designed to provide a high output and ruggedly durable lighting solution for applications where Class 1 Division 2 compliance is required. ThisÂ explosion proof light can be powered from 120-240V AC power sources stepped down to 24V DC and includes 50 feet of 16/3 SOOW cable terminated in a 125V or 250V explosion proof plug. The encapsulated transformer is located on the supply end of the cable, with 5` of SOOW cable between the explosion proof cord cap and the transformer, and 50` of SOOW cable between the transformer and the light fixture.
|Durability/Mounting: The HAL-36-25W-LED-TXF-50C hazardous area LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP54 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. The LEDs in this linear light are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than comparable LEDs. Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170Â° vertically for the best placement.Â The entire assembly weighs 2.1 lbs and measures 35.88 inches in length,Â 2.68 inches wide and 1.69 inchesÂ deep, making it ideal for mounting in areas where space is limited and a low profile fixture is more readily installed. Wiring/Power: These hazardous location LED lights are equipped with 50` of 16/3 SOOW cable between the light and the explosion proof inline stepdown transformer. An additional 5` 16/3 SOOW cable between the transformer and cord cap allows operators to make secure electrical connections to explosion proof outlets. This unit is terminated in an explosion proof NEMA 5-15, 15 amp, 125V rated cord cap for 120V configurations or a NEMA 6-20, 20 amp, 250V rated cord cap for 240V confirgurations. These lights operate from 120-240 volt AC current atÂ 25 watts drawing 0.21 amps on 120 VAC and 0.11 amps on 240 VAC and are stepped down to 24V DC. Versatility: The HAL-36-25W-LED-TXF-50C is ETLÂ approved for Class 1 Division 2 groups A,B,C and D locations. This unit carries an IP54 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.