|HAL-7W-LED-LVAC-10C Hazardous Location LED Light||Approvals/Ratings|
|Lamp Type: LED||Class 1 Division 2 Groups A,B,C,D|
|Lamp Dimensions (w/o Bracket): 3.47" Diam" x 4.44"-DepthÂ||CSA 22.2 No. 250.0|
|Lamp Dimensions (w/ Bracket):Â 4.87"H x 4.22" W||UL 1598|
|Weight: 2.3 lb | 1.04 k g||IP66 Ingress Protection|
|Watts: 7.9 W @ 12 VDC | 8.4 W @ 24 VDC||T3 Temperature Rating|
|Voltage: 12V AC or 24V AC||LM-80 > 60,500 hrs (based on Cree long term tests)|
|Lumens: Spot: 587 - Flood: 459Â|
|Lamp Life Expectancy: 100,000 Hours|
|CRI:Â CW: 75, NW: 75, WW: 80|
|Amps: 0.66 A @12 VDC | 0.35 A @ 24 VDC|
|Light Color:Â CW: 6500K, NW: 4300K, WW: 3500K|
|Beam Type: 30Â° Spot or 120Â° Flood|
|Mounting: 1/4â€ - 20 Screws /Aluminum Yoke|
|Materials:Â Machined aluminum housing - acrylic lens|
|Housing Finish:Â Clear anodized finish|
|Temp Range: -40Â°C to +85Â°C|
|Typical Case Temperature:Â ~20Â°C above ambient temperature|
|Wiring: 10Ft Lead | White: + Black: -||E-mail:|
Buy American Compliant
The HAL-7W-LED-LVAC-10C from Larson Electronics is a low voltage hazardous area lighting solution that is approved for Class I Division 2 Environments and 1598 compliant for use in wet locations. This powerful LED light produces 587 lumens, operates from 12 or 24 V AC, and is available in a variety of configurations to allow tailoring to the specific requirements of various applications.
The HAL-7W-LED-LVAC-10C is designed to provide a high output and ruggedly durable lighting solution for applications where Class I Division 2 compliance is required. This low voltage explosion proof light can be operated with either 12 or 24 volt AC current and includes 10 feet of connecting lead with standard two wire configuration. This light is constructed of precision machined aluminum for excellent strength and durability and is rated IP66 for ingress protection against direct exposure to high pressure water spray.
The HAL-7W-LED-LVAC-10C is available in a 30 degree spotlight beam configuration for distance and a 120 degree configuration for wide area illumination, and a cool white color temperature for maximum illumination. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable incandescent and halogen lamps.
|LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Durability: The HAL-7W-LED-LVAC-10C hazardous location LED light is constructed of machined aluminum for high strength and durability with a clear anodized finish for increased corrosion resistance. The housing is IP66 rated, providing protection against intrusion into the housing from oils and water directly sprayed on the housing at high pressure. This LED light is equipped with an impact resistant acrlyic lens for increased safety compared to glass lenses. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wet conditions are commonly encountered. High Output LEDs: The LEDs in this unit are Cree X-Lamp XR-E units that have been chosen for their high lumen per watt ratio and extreme long life. These Cree LEDs provide over 90 lumens per watt output and have a 70% lumen retention at 100,000 hours, giving them better efficiency and operational life than comparable LEDs. These lights are equipped with high purity optics and available in a 30 degree spotlight configuration for long beam length or 120 degree flood configuration for wide area coverage. Utilizing an acrylic lens, this fixture produces a higher light output than similar fixtures equipped with thicker glass lenses. The HAL-7W-LED-LVAC-10C has multiple color temperature options and is offered in 6500K cool white with a color rendering of 75, 4300K neutral white with a color rendering of 75, and 3500K warm white with a color rendering of 80. Mounting: Mounting for this unit is provided by an included aluminum yoke that allows vertical adjustment of the light once installed. The mounting yoke is predrilled with two 1/4 inch holes spaced 1-1/2 inches apart for easy and secure mounting to flat surfaces. The entire assembly weighs 2.3 lbs and measures only 3.47 inches in diameter and approximately 4-1/2 inches deep, making it ideal for mounting in areas where space is limited and a heavy fixture cannot be installed due to lack of support. Wiring/Power: These hazardous location LED lights are equipped with 10 feet of cord containing a standard two wire (White+ Black-) connecting configuration. These lights operate from 12 or 24 volt AC current at 7.9 watts 0.66 amps on 12V AC and 8.4 Watts 0.35 amps on 24V AC. Versatility: The HAL-7W-LED-LVAC-10C is ETL approved for Class I Division 2 groups A, B, C, and D locations. This unit carries an IP66 waterproof rating ensuring protection against ingress from oils and water sprayed at high pressure directly on the fixture. This light is ideal for indoor or outdoor applications, food processing, and industrial operations with hazardous location classification where wet conditions are commonly encountered.|
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at email@example.com or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.