Hazardous Location Area Emergency Backup Fluorescent Light - 2 foot 2 lamp - Class 1 Division 2 Grou


Sale price$1,611.99


Specifications / Additional Information
HAL-EMG-24-2L-T8 Hazardous Area Emergency Light Ratings
NRTL Listed for United States & Canada Class 1 Division 2, Groups A, B, C, D
Lamp Type: Fluorescent NRTL Certified to UL 595 Outdoor Marine Type (Saltwater)
Dimensions: W-7"   L-25.5 "   H-6 1/8 " NRTL Certified to UL 1598A Marine Type
Weight: 17 Lbs California Title 24 Compliant
Voltage: Multi- 120V-60hz  220V-50hz  240V-60hz  277V-60hz Temp Rating: T4A
Total Watts: 34 watts Switch Leg for Powering Light On/Off
Total Lumens: 2650
Luminous Efficacy:   83 Lm/W
Lamp Life Expectancy: 24,000 Hours
Color Temp: 4100K-
Beam Angle: N/A
Ambient Operating Temp Range:-30°C to +70°C
Operating Temp Range: T4A Rated
Minimum Operating Temp: -30°C
Maximum Case Temp: 90°C
Mounting: Bracket Standard
Wiring Hub:1/2" or 3/4" threaded
Warranty: 5 Years*
' Product Overview '
Made in the USA The Larson Electronics HAL-EMG-24-2L-T8 Hazardous Area Fluorescent Emergency Backup Light Fixture is NRTL Listed for United States and Canada Class 1 Division 2 Groups A, B, C and D - NRTL Certified to UL 1598A listed, has a T4A temperature rating and ideal for open air hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-EMG-24-2L-T8 emergency fixture is a 2 foot long, 2 lamp, Class 1 Division 2 Groups A, B, C and D hazardous area fluorescent light with an emergency backup ballast and a good choice for use in applications where space is at a premium. This fixture is T4A temperature rated, comes standard T8/841 bulbs. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture is multi-voltage capable and is NRTL Certified to U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-EMG-24-2L-T8 provides operators in hazardous locations with a compact, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. This light works, mounts and is wired like our HAL-24-2L-T8 explosion proof light fixtures. The main difference is that we add a battery backup unit that adds emergency light functionality to the fixture. This hazardous area emergency light will run one lamp at the standard suggested 90 minutes after power is lost at 1350 lumens. The light recharges the battery once electrical power is restored. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode.
Click Photo to Enlarge
Surface Mount (Standard) Pendant Mount (Optional)
NOTE ON LAMPS: This fixture comes equipped with F17-T8/ 17 Watt lamps producing 1,325 lumens per bulb, a 4100 Kelvin color and a 24,000 hour rated service life. The HAL-EMG-24-2L-T8 has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. Standard Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality Lamp Options
1. Each unit dielectrically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy. 4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps. 5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion. 6. 1/2" or 3/4", threaded access hole for wiring conduit.  7. Units can be wired end to end in series. F17-T8– 1325 lumens per bulb (2650 lumens total), 24,000 hours life, 4100 Kelvin color. 

Shipping and delivery Information

The PuriLite Peace of Mind 30-day money back guarantee


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed