Explosion Proof LED Inspection Light - C1D2 - White/UV - Adjustable Table Arm Mount - 8' Cord w/ Switch
Explosion Proof LED Inspection Light - C1D2 - White/UV - Adjustable Table Arm Mount - 8' Cord w/ Switch
| HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 Explosion Proof LED Light | Ratings/Approvals |
| Listing: NRTL Listed for United States and Canada | Class I, Division 2, Groups A, B, C, D |
| Lamp Technology: White LED/UV LED | NRTL Listed to UL 1598 |
| Dimensions: - | IP65 |
| Height Adjustment: 16" Vertical | T3 Temp Rating |
| Extension Adjustment: 360° Rotation - 18.5" Max Extension | Full, 360° Rotation |
| Total Watts: 11W | Â |
| Voltage: 120/240V AC | Â |
| Lumens (White): 750 lms | Â |
| Luminous Efficacy (White):Â 125 Lm/W | Â |
| Total Intensity (UV): 1,750 mW/cm2 | Â |
| Radiant Efficacy (UV): 1,050 mW/w | Â |
| LED Life Expectancy: 50,000 hours | Â |
| Color Temp: 6000K - White | Â |
| CRI: > 75 | Â |
| UV Wavelength: 365nm | Â |
| Lamp Type: - | Â |
| Lamp Base: - | Â |
| Replacement Lamp: - | Â |
| Beam Angle: 100° |  |
| Lighting Configuration: Flood | Â |
| Power Efficiency: >95% | |
| Power Factor: 0.992 | |
| Switch: On/Off/On | |
| Amps: 0.091A @ 120V, 0.045A @ 240V | |
| Ambient Operating Temp Range: -40°C to +60°C | |
| Operating Temp Rating: T3 | |
| Housing Material: Extruded Aluminum | |
| Light Housing Color: Powder Coated - Black | |
| Lens Material: - | |
| Mounting: Adjustable Table Arm Mount | |
| Wiring: 8` 16/4 SOOW Cord |
| The HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 from Larson Electronics is an Explosion Proof LED Fixture that features an adjustable table arm mount for inspections in hazardous locations. This LED lamp operates on 120/240V AC and provides both white LED light and UV LED light output. The HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 comes equipped with a 3-position switch. The HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 offers hands-free lighting and flexible positioning during inspections in Class I, Division 2 rated hazardous locations. This 11-watt unit is equipped with one white LED light (750 lumens; 6000K color temp rating) and one UV LED light (1,750 mW/cm2; 365nm wavelength). Designed to operate on 120/240V AC, the lamp features a flood beam configuration. This light is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to low pressure water jets from all directions and sealed against dust penetration. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or "duty cycle" accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LED`s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours. Durability: The HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered. Wiring/Switch: The HAL-TBL-IPS-2X6-VISUV-8C-ILS-1227 is wired to a junction box that is equipped with 8' of 16/4 SOOW cord leading to a 3-position switch. The switch is configured with the following controls: On/Off/On. One side turns on the white LED light, while the other side turns on the UV LED light. The center turns off both lights. Mounting: This explosion proof LED light is secured on an aluminum back plate and can be installed on flat surfaces, such as desks and platforms, using an adjustable table arm mounting system. The mounting component, which is constructed of aircraft-grade aluminum, supports 360 degrees of rotation, 180 degrees of swivel, as well as 15 degrees (up) and 85 degrees (down) of tilt. The LED lamp does not need to be removed when positioning the unit. For elevated illumination, the mounting component is adjustable at height of 16". The arm is gas spring-powered for accurate positioning of the luminary. During installation, operators may either clamp the base of the mount at the end of the platform (does not require holes) or secure the foundational component into the surface with screws. Applications: Inspections, detailed tasks, labs, soldering, petroleum refineries, chemical and petrochemical plants, paint spray booths, food manufacturing buildings, hazardous locations and more. |
Shipping and delivery Information
Shipping and delivery Information
Estimated delivery times range from same day to 2 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at info@purilite.ca or chat with us by clicking on the chat icon at the bottom right of this page.
The PuriLite Peace of Mind 30-day money back guarantee
The PuriLite Peace of Mind 30-day money back guarantee
Enjoy our peace of mind 30-day money back guarantee on all products. If you are not satisfied with any of our products, your item is eligible for return within 30 days of purchase, subject to the terms & conditions below.
1. Goods must be returned in new & unused conditions with all original packaging. Do not write or put stickers on original packaging.
2. Any shipping charges incurred by Purilite to ship the product to your destination and returns from your location to our warehouse, in case of refused shipments, are non-refundable.
3. Depending on the product purchased, the client will be responsible for shipping product back to our warehouses.
4. Restocking fees map apply once inspected at our warehouse. All credits are subject to final inspection of good upon arrival at our destination.
5. Defective products are eligible for return.
If you purchased a product and did not receive the parcel, please contact us at sales@purilite.ca and we would be happy to assist you right away! PuriLite uses secure and well-established carriers (such as Canada Post, FedEx, Purolator, UPS etc.) to ensure your purchase is delivered successfully to your doorstep. All items are delivered with a tracking ID and are traceable. If your parcel was indeed not received, we will issue back a 100% refund.
Shop with confidence knowing that your purchase is protected, and your peace of mind is our commitment. Thank you for choosing PuriLite!
Sustainability & Ethical Sourcing
Sustainability & Ethical Sourcing
At PuriLite, we believe innovation should go hand-in-hand with responsibility. That’s why we’re committed to creating products that not only perform well but are also thoughtfully made with the planet and people in mind.
♻️ Sustainable Practices
- We prioritize durable materials that extend the product life cycle and reduce waste.
- Where possible, our packaging is made from recyclable or minimal-waste materials, helping to reduce environmental impact.
- Many of our electronic products are designed with energy efficiency in mind to minimize power consumption.
🤝 Ethical Sourcing
- We partner with manufacturers who fillow fair labor practices, ensuring safe working conditions and fair wages for their workers.
- All suppliers are carefully vetted for compliance with environmental and ethical standards.
- We avoid the use of materials from conflict zones and work to reduce the environmental footprint across our supply chain.
🌍 Our Ongoing Commitment
We're actively exploring new ways to improve—from using eco-certified components to optimizing our logistics for a lower carbon footprint. Every small step counts, and we’re committed to doing our part in building a more sustainable future.
