50W Explosion Proof LED Light - 1x1 Lay-In Troffer - C1D1/2 - Amber - Paint Spray Booth Rated


Sale price$3,833.99


Specifications / Additional Information
HALD-12-1X50LED-AMB HAZLOC Lay-In Panel Mount Light Ratings/Approvals
Listing: United States - Canada Class I, Divisions 1 & 2, Groups C and D
Lamp Type: Cree LED Class II, Divisions 1 & 2, Groups E,F,G
Dimensions: 11-3/4"-L x 11-3/4"-W x 8"-D Certified to UL 844 Ed. 13
Flange Dimensions: 13-1/2”-L x 13-1/2"-W Certified to UL 1598
Weight: - Certified to C22.2 No. 137 Rev 2009
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC Certified to C22.2 No. 250.0
Total Watts: 50W Certified to C22.2 No. 30-M-1986 Rev 2012
Lumens: 7,000 lms T5 Temperature Rating
Luminous Efficacy: 140 Lm/W Paint Spray Booth Approved
Lamp Life: 60,000+ Hours IEC 60529 Tested
Light Color: Amber IP67 Rated Waterproof
Color Rendering Index: - LEL Approved
Lamp Type: - Multiple Driver Banks
Lamp Base: - 80% Lumen Retention after 60,000 Hours
Replacement Lamp: - Factory Sealed Light Fixture
Beam Angle: 60° or 125° 1x1 Recessed Panel Mounting
Lighting Configuration: Flood Pattern  
Power Efficiency: >95%  
Power Factor: 0.992  
Ambient Operating Temp Range:-50°C to +65°C  
Operating Temp Rating: T5  
Housing Material: Copper Free Cast Aluminum
Housing Finish: Powder Coated - White
Lens Material: 1/8" Polycarbonate
Mounting: Recessed Panel Mounting
Wiring: 10` 16/3 SOOW w/ Flying Leads
Wiring Hub: 3/4" NPT
LED Driver Specs
Input Voltage: 100-277 Volts AC
Input Current: 1.8A Max
Power Factor: >98%
Efficiency: >88%
Output Voltage: 54V Max
Output Current: 2.1A
' Product Overview '
The Larson Electronics HALD-12-1X50LED-AMB Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This 1x1 LED panel mount fixture is ETL listed Class I, Divisions 1 & 2 and Class II, Divisions 1 & 2, and is approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HALD-12-1X50LED-AMB is a 1x1 Class I, Division 1 & 2 lay-in LED light fixture that is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3/16" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish. This Class I, Divisions 1 & 2 and Class II, Divisions 1 & 2 explosion proof light fixture provides 7,000 lumens of high-quality amber light while drawing only 50 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains eight individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Voltage: This light is multi-voltage capable and can be operated with 100-277V AC, 50/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. Mounting: This 1x1 fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture`s door frame will extend 3/8” into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present.

Shipping and delivery Information


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed