40W Hazardous Location LED Light - 1x1 Lay-In Troffer - C1D2 - Amber/White - Dual Circuit


Sale price$6,903.99


Specifications / Additional Information
HALD-16-4XIPS.12-LED-2XSL-1227-VSAMB HAZLOC Lay-In Panel Mount Light Ratings/Approvals
Listing: United States - Canada Class I, Division 2 Groups A, B, C & D
Lamp Type: LED CSA 22.2 No. 250.0
Lamp Qty: (4) UL 1598
Dimensions: 16" x 16" x 10" IP65 Ingress Protection
Flange Dimensions: 16" x 16" T3 Temperature Rating
Weight: - 70% Lumen Retention after 60,000 Hours
Voltage: 120-277 Volts AC, 50/60Hz Factory Sealed Light Fixture
Total Watts: 40W 1x1 Recessed Panel Mounting
Single-lamp Watts: 10W Dual Circuit
Total Lumens: 5,200 lms  
Single-lamp Lumens: 1,300 lms  
Luminous Efficacy: 130 Lm/W  
Lamp Life: 50,000+ Hours  
Light Color: Amber and White (5000K)  
Color Rendering Index: >75 CRI  
Lamp Type: -  
Lamp Base: -  
Replacement Lamp: -  
Beam Angle: Spot or Flood  
Lighting Configuration: -  
Power Efficiency: >95%  
Power Factor: 0.992  
Ambient Operating Temp Range:-40°C to +60°C  
Operating Temp Rating: T3  
Housing Material: Copper Free Cast Aluminum
Housing Finish: Powder Coated - White
Lens Material: 1/8" Polycarbonate
Mounting: Recessed Panel Mounting
Wiring: 10` 16/3 SOOW w/ Flying Leads
Wiring Hub: 3/4" NPT
' Product Overview '
The Larson Electronics HALD-16-4XIPS.12-LED-2XSL-1227-VSAMB Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This 1x1 LED panel mount fixture emits amber and white light. Equipped with a dual-circuit configuration, LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HALD-16-4XIPS.12-LED-2XSL-1227-VSAMB is a hazardous location lay-in LED light fixture that is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. This fixture is T3 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3/16" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish. This Class I, Division 2 hazardous location light fixture provides 5,200 lumens of high-quality amber and white light (with a 5000K color temperature rating) while drawing only 40 watts per lamp. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 50,000 hour rated lifespan with 70% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The hazardous location fixture contains a dual-circuit configuration, which allows separate control of each light color (at two LED lamps per light color) or operation of both colors simultaneously. Through this feature, operators may also choose to wire different switches for independent control of the lamps. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. Voltage: This light is multi-voltage capable and can be operated with 120-277V AC, 50/60Hz without any need for a special ballast. The aluminum body and LED lamp gives this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. Mounting: This 1x1 fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Applications: Hazardous locations and enclosed spaces where flammable chemical/petrochemical vapors are present.

Shipping and delivery Information

The PuriLite Peace of Mind 30-day money back guarantee


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed