|HALD-48-2L-LED LED Paint Booth Lay-In Fixture
|Lamp Type: T8-Style LED Tubes
|Class I Division 2, Groups A, B, C, D
|Dimensions: 10.75"W x 50.875"L x 2.25"D
|Class II Division 2 Groups F,G
|Cutoff Switch: 10 Watts at 300 V AC (Max) Momentary Contact SwitchÂ
|IP20 Ingress Protection Rating
|Total Watts: 36 Watts
|ETL listed U.S. and Canada
|Voltage: 100-277 Volts AC, 50/60 Hz or 11-25 Volts AC/DC
|NRTL Certified to UL-1993
|Total Lumens: 7,000
|NRTL Certified to UL-1993 CLS
|Lamp Life Expectancy: 50,000 Hours
|NRTL Certified to CAN/CSA C22.2 No 1993
|Luminous Efficacy: 125 Lm/W
|Weight: 40 lb
|Color Temperature: 3000K, 4500K, or 5600K
|Color Rendering Index: 85+
|Beam Angle: 150Â°
|Lighting Configuration: Flood Pattern
|Special Orders - Requirements
|Power Efficiency: 90%
|Power Factor: >0.95
|Toll Free:Â 1-800-369-6671
|Ambient Temperature Rating: -40Â°C to +65Â°C
|Mounting: Recessed 1X4 Lay-In Panel Mounting
|Wiring Hub: 1/2" Threaded NPT Hub
|Made in the USA The HALD-48-2L-LED from Larson Electronics is a Hazardous Area LED Light Fixture that is designed to provide a thin fixture profile that allows the maximum use of available space. This fluorescent fixture is U.S./Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical/petrochemical vapors are present. The HALD-48-2L-LED is offered in 100-277 Volts AC, 50/60 Hz or 11-25 Volts AC/DC voltage configurations and draws a total of 56 watts while producing a total of 7,000 lumens. The HALD-48-2L-LED is designed for 1X4 lay-in mounting. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM*** The HALD-48-2L-LED Explosion Proof fixture is a 4 foot long, 2 lamp, Class I Division 2 hazardous area LED light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is IP20 ingress protection rated, comes standard with LEDT8-28W-V1 LED bulbs and features an integrated momentary paint spray system cutoff switch that is activated when this fixture's lamp door is opened. The lamps are protected by a steel framed, hinged, 3/16" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1/4 inches thick, designed for recessed 1X4 lay-in mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. This fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-2L-LED provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. NOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 V AC. Overloading the switch through improper connection will result in switch failure. It is recommended that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light's cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120 V to 277 V AC, 50/60 Hz without any modifications. We also make a 12-24 V AC/DC version for low voltage applications for AC to DC power. Mounting: This fixture is designed for recessed 1X4 lay-in mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this fixture's glass door frame will extend 3/8" into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.