|HALD-48-2L-LED-NL LED Paint Booth Lay-In Fixture||Approvals/Ratings|
|Lamp Type: NO LAMPS||Class I Division 2, Groups A, B, C, D|
|Dimensions: 10.75"W x 50.875"L x 2.25"D||Class II Division 2 Groups F, G|
|Cutoff Switch: 10 Watts at 300 V AC (Max) Momentary Contact Switch||IP20 Ingress Protection Rating|
|Max Wattage: 60W Total (30W per lamp)||ETL listed U.S. and Canada|
|Voltage: 100-277 Volts AC, 50/60 Hz or 11-25 Volts AC/DC||NRTL Certified to UL-1993|
|Total Lumens: -||NRTL Certified to UL-1993 CLS|
|Lamp Life Expectancy: -||NRTL Certified to CAN/CSA C22.2 No 1993|
|Luminous Efficacy: -||LEL Listed|
|Weight: 40 lb|
|Color Temperature: -|
|Color Rendering Index: -|
|Beam Angle: 150Â°|
|Lighting Configuration: Flood Pattern||Special Orders - Requirements|
|Power Efficiency: 90%|
|Power Factor: >0.95||Toll Free:Â 1-800-369-6671|
|Ambient Temperature Rating: -40Â°C to +65Â°C||Intl:Â 1-214-616-6180|
|Mounting: Recessed 1X4 Lay-In Panel Mounting||Fax:Â 1-903-498-3364|
|Wiring Hub: 1/2" Threaded NPT Hub||E-mail:Â|
|Made in the USA The HALD-48-2L-LED-NL from Larson Electronics is a Hazardous Area LED Light Fixture that is designed to provide a thin fixture profile that allows the maximum use of available space. This fluorescent fixture is U.S./Canada approved Class I Division 2, Groups A, B, C and D - Class II Division 2, Groups F and G and designed for paint spray booths and locations where flammable chemical/petrochemical vapors are present. The HALD-48-2L-LED-NL is offered in 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC voltage configurations and has a max wattage of 60W or 30W per lamp. The HALD-48-2L-LED-NL is designed to accept LED lamps and is designed for 1X4 lay-in mounting. *PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS LIGHTING SYSTEM* The HALD-48-2L-LED-NL Explosion Proof fixture is a 4 foot long, 2 lamp, Class I Division 2 hazardous area led light and ideal for use in paint spray booths and hazardous locations where space for lighting fixtures is limited. This fixture is IP20 ingress protection rated, is designed to be equipped with LED lamps and features an integrated momentary paint spray system cutoff switch that is activated when this fixture's lamp door is opened. The lamps are protected by a steel framed, hinged, 3/16" thick glass door that provides direct front access to the four lamps. The lamp housing is only 2 and 1/4 inches thick, designed for recessed 1X4 lay-in mounting, constructed of 20 Gauge steel and coated with a baked on white enamel finish. PLEASE NOTE: The HALD-48-2L-LED-NL light fixture is sold without lamps and is not equipped with a ballast. This fixture is multi-voltage capable and is approved for use paint spray booths. The HALD-48-2L-LED-NL provides operators in hazardous locations with a reliable and durable, low profile lighting solution that provides added safety through the inclusion of an integral paint spray cutoff switch that shuts down paint spray systems when the fixture is opened. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight and creates a slimmer unit profile. There is no ballast in this unit and is designed to be used with LED lamps, both of which result in extreme efficiency and greatly reduced maintenance costs. The solid state design of LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature, and a lamp service life over twice that of standard fluorescent bulbs. NOTE: The integral momentary cutoff switch included with this fixture is activated when the lamp door is opened. This switch is not intended to directly control light operation and requires the addition of a separate solid state relay which is then used to control actual system operation. The Cutoff Switch acts only as an activator for an external relay and is rated for 10 watts at a maximum of 300 V AC. Overloading the switch through improper connection will result in switch failure. It is recommended that a certified electrician make any installations and reviews of relay connections intended to take advantage of this light's cutoff switch. This fixture is universal voltage, not multi-tap, and operates on any voltage from 120V to 277 V AC, 50/60 Hz without any modifications. We also make a 12/24 V AC/DC version for low voltage applications for AC to DC power. Mounting: This fixture is designed for recessed 1X4 lay-in mounting and requires a mounting hole to be made in booth panels capable of accomodating the fixture housing in order to provide the maximum amount of space in paint spray booth enclosures. Once mounted, this ftixture's glass door frame will extend 3/8" into the spray booth. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present.|
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.