Low Profile Explosion Proof LED Light - Class I, II - Corner Mount - Paint Spray Booth Rated

LARSON ELECTRONICSSKU: PL3-HALD-CLS-1X150LED
filler

Price:
Sale price$3,373.99

Description

Specifications / Additional Information
HALD-CLS-1X150LED HAZLOC Corner Mount Light Ratings/Features
Listing: NRTL Listed for United States and Canada Class I, Divisions 1 & 2, Groups C and D
Lamp Technology: Cree LED Class II, Divisions 1 & 2, Groups E,F,G
Dimensions: - Certified to UL 844 Ed. 13
Weight: 40 lbs Certified to UL 1598
Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC Certified to C22.2 No. 137 Rev 2009
Total Watts: 150W Certified to C22.2 No. 250.0
Lumens: 21,000 Certified to C22.2 No. 30-M-1986 Rev 2012
Luminous Efficacy: 140 Lm/W T5 Temperature Rating
Lamp Life: 60,000+ Hours Paint Spray Booth Approved
Color Temp: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K, or 6500K IEC 60529 Tested
Color Rendering Index: >75 CRI IP67 Rated Waterproof
Lamp Type:  - LEL Approved
Lamp Base: - Multiple Driver Banks
Replacement Lamp: - 80% Lumen Retention after 60,000 Hours
Beam Angle: 60°, 125°, or 140° Factory Sealed Light Fixture
Lighting Configuration: Flood Pattern 3.5kV Surge Protection (NTC Circuit)
Power Efficiency: >95%  
Power Factor: 0.992  
Ambient Operating Temp Range:-50° C to +65°C  
Operating Temp Rating: T5  
Housing Material: Copper Free Cast Aluminum
Housing Finish: Powder Coated - White
Lens Material: Polycarbonate
Mounting: Wall-to-Ceiling Corner Mount
Wiring: 10` 16/3 SOOW w/ Flying Leads
Wiring Hub: 3/4" NPT
' Product Overview '
Made in the USA The Larson Electronics HALD-CLS-1X150LED Hazardous Area LED Light Fixture is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED fixture is NRTL listed Class I, Divisions 1 & 2 and Class II, Divisions 1 & 2 and approved for use within paint spray booths. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for paint booths and hazardous locations where flammable chemical/petrochemical vapors are present. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HALD-CLS-1X150LED is ideal for use in paint spray booths and hazardous environments where space for lighting fixtures is limited. Designed for wall-to-ceiling corner mount applications, this fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, 3/16" thick polycarbonate lens that provides direct front access to the internal components. This Class I, Division 1 & 2 and Class II, Division 1 & 2 explosion proof light fixture provides 21,000 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. A special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install. The integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate. Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide instant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental burns and increased temperatures due to heat emissions. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional lighting. This light is multi-voltage capable and can be operated with 100-277V AC, 50/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 21,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries. Mounting: The HALD-CLS-1X150LED is compatible with wall-to-ceiling corner mounting installations. This mounting solution enables the angled lighting system to be installed in corners without a compatible angled ceiling. When properly mounted, the explosion proof light provides a 45-degree angle from the ground. Applications: Paint spray booths and enclosed spaces where flammable chemical/petrochemical vapors are present.

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed