|HALD-EMG-24-1X150LED-V2 HAZLOC Lay-In Panel Mount Light||Ratings/Approvals|
|Listing: United States - Canada||Listed for United States and Canada|
|Lamp Type: Cree LED||Class I, Divisions 1 & 2, Groups C and D|
|Dimensions: 24"L x 24"W x D4.5"||Class II, Divisions 1 & 2, Groups E,F,G|
|Flange Dimensions: 24"L x 24"W||Class III, Divisions 1 & 2|
|Weight: 37.5 lbs||FS-209E Clean Room Rated|
|Voltage: 100-277 Volts AC, 50/60Hz or 11-25 Volts AC/DC||ISO 14644 Clean Room Rated|
|Total Watts: 150W||Certified to UL 844 Ed. 13|
|Total Lumens: 17,500||Certified to UL 1598|
|Luminous Efficacy: 116.67 Lm/W||Certified to C22.2 No. 137 Rev 2009|
|Lamp Life: 60,000+ Hours||Certified to C22.2 No. 250.0|
|Color Temp: 5000K, 4000K, 3000K||Certified to C22.2 No. 30-M-1986 Rev 2012|
|Color Rendering Index: >75 CRI||T5 Temperature Rating|
|Beam Angle: 60Â° or 125Â°||IEC 60529 Tested|
|Lighting Configuration:Â Flood Pattern||IP67 Rated Waterproof|
|Power Efficiency: >95%||LEL Approved|
|Mounting: Recessed Panel Mounting||Multiple Driver Banks|
|Power Factor: 0.992||80% Lumen Retention after 60,000 Hours|
|Ambient Operating Temp Range: -50Â°C to +65Â°C||Factory Sealed Light Fixture|
|Operating Temp Rating: T5||Made in the USA|
|Housing Material: Steel||Remote Mount Emergency Battery Backup|
|Housing Finish: Powder Coated - White|
|Lens Material: Polycarbonate|
|Mounting: Recessed Panel Mounting||Toll Free:Â 1-800-369-6671|
|Emergency Runtime: 90 Minutes||Intl:Â 1-214-616-6180|
|Emergency Lumens: 2,625||Fax:Â 1-903-498-3364|
|Wiring Hub: 3/4" NPT||E-mail:Â|
Made in the USA
The HALD-EMG-24-1X150LED-V2 from Larson Electronics is an LED Hazardous Area LED Light Fixture that is designed to provide operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. This LED panel mount fixture is ETL listed Class I Division 2, Class II Divisions 1 & 2, as well as sealed and rated for FS 209E and ISO 14644 cleanroom applications. Cree LED technology makes this lamp an excellent replacement/upgrade option for clean rooms where flammable vapors are present and little to no contamination is required. This unit features a remote mount battery backup for emergency operation.
***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE***
The HALD-EMG-24-1X150LED-V2 Explosion Proof Clean Room rated LED fixture is a 2x2 Class I Division 2 hazardous location lay-in LED light fixture and is ideal for use in clean rooms and other areas that require little to no contamination and where space for lighting fixtures is limited. This fixture is T5 temperature rated and is a fully integrated LED unit. The LED assembly is protected by an aluminum framed, hinged, 3/16" thick polycarbonate door that provides direct front access to the internal components. The lamp housing is designed for recessed mounting, and is constructed of non-sparking aluminum coated with a powder coated white finish.
For reliable operation, we added a remote mounted battery backup unit that adds emergency light functionality to the fixture. This emergency LED light will run at the standard UL suggested 90 minutes after power is lost at 2,625 lumens. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency battery backup that is automatically recharged and kept in a ready state.
This Class I Division 2, Class II Divisions 1 & 2 explosion proof light fixture provides 17,500 lumens of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60,000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
The integrated LED assembly in this unit features multiple LED drivers which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contains twenty-four individual LED boards configured in a series of banks. Each bank contains two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to operate.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
This light is universal voltage capable and can be operated with 100-277V AC, 50/60Hz without any need for a special ballast. The aluminum body and LED lamp give this light excellent durability and resistance to vibration and impacts. The housing is specially designed to dissipate heat which increases the efficiency and lifespan of the LED luminaries. The LED lamp produces 35,000 lumens with a color temperature of 5000K, 4000K, or 3000K and a color rendering index of 75 which produces colors and details much more accurately than high pressure sodium or mercury vapor luminaries.
Mounting: This fixture is designed for recessed mounting and requires a mounting hole to be made in booth panels capable of accommodating the fixture housing in order to provide the maximum amount of space in clean room areas. Once mounted, this fixture`s door frame will extend 3/8" into the clean room.
Applications: ISO 14644 and FS-209E clean room applications that require little to no contamination including but not limited to medical applications, pharmaceutical, laboratories and any other applications that require ample lighting with little to no contamination within the work area atmosphere.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call 1-844-787-5483, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.