Class I, Div II Fluorescent Fixture - Corrosion Resistant (Saltwater) - 2' Fixture - Bi-Axial Design

LARSON ELECTRONICSSKU: PL3-HALP-24-2L-BX
filler

Price:
Sale price$1,225.99

Description

Specifications / Additional Information
HALP-24-2L-BX Hazardous Area U.L. Ratings
UL Listings: United States - Canada  Class I Division 2, Groups A, B, C, D 
Dimensions: L-25.88” x W-7.21” x H-5.43”  Class II, Division 2, Groups F, G
Weight: 10.8Lbs UL 844
Total Watts: 80 watts UL 1598A Marine Type (Salt water)
Voltage: 120-277 AC 50/60Hz California Title 24 Compliant
Total Lumens: N/A UL Listed for Canada 
Lamp Life Expectancy: 20,000 Hours Meets USCG Specs
Efficiency: N/A T4 Temperature Rating
Operating Temp Range: T4A Rated -30 C to +70 C Meets US Coast Guard specifications
Minimum Operating Temp: -20 C
Maximum Case Temp: 70 C
Beam Angle: N/A
Color Temp: N/A
Surface Mounting: Flange type aluminum brackets Toll Free: 1-800-369-6671
Pendant Mounting (2) 1/2" or 3/4" hubs on either side of fixture Intl: 1-214-616-6180
Wiring Hub: (2) 1/2" or 3/4" threaded on eiether side  Fax: 1-903-498-3364
U.L Approval:    E-mail: 
*Wattage totals are lamps only and may vary with different lamps.
' Product Overview '
Made in the USA The Larson Electronics HALP-24-2L-BX Hazardous Area Fluorescent Light Fixture is U.S / Canada U.L approved Class 1 Division 2 Groups A, B, C and D - UL 1598A listed, has a T4A temperature rating and is specifically designed to handle the rigors of wet and corrosive marine environments. This fixture uses Bi-Axial design bulbs to increase wattage and light output without increasing fixture size or weight. The HALP-24-2L-BX hazardous area fluorescent light fixture builds on the effectiveness of our HALP-24 series by including bi-axial lamps which raise the fixture`s wattage and light output totals without increasing the unit`s size or weight. Although some efficiency is sacrificed for increased output, this unit`s lower cost and increased ouput helps offset this lower efficiency. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant plastic  latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The HALP-24-2L-BX also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications. This fixture ideal for hazardous areas where corrosion resistance is mandatory and space limitations require a powerful yet compact lighting solution.
 Click Photo to Enlarge
NOTE ON LAMPS: This fixture comes equipped with Bi-Axial Bulbs which increases the wattage of the standard HALP-24-2L from 48 watts with 2 standard T5-HO lamps to 80 watts with bi-axial bulbs. The HALP-24-2L-BX has an electronic universal voltage ballast and works with 120-277 ACV.  Surface Mounting: Flange type aluminum brackets attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 14.91" inches on center apart along the top of this hazardous location light. The mounting holes are 9.5" inches on center across the top of the light. Pendant Mounting: This light fixture can hang from the ceiling suspected by rigid pipe. Each fixture is equipped with either two 1/2" or 3/4" NPT hubs on either side of the  fixture. Operators will bring rigid pipe down to the threaded mounting hubs. The wiring is fed down through the rigid pipe to one of the NPT hubs and tied to the fixture`s lead wires to complete the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture.  Suggested Applications: The HALP-24-2L-BX is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Made in USA Quality Lamp Options
1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. 3. Fixture housing constructed of glass fiber reinforced polyester. 4. Relamping done via stainless steel snap locking latches, which enable the operator to remove the door and access the lamps. 5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection. 6. 1/2" or 3/4", threaded access hole for wiring conduit. N/A

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed