C1D2 T8/T10 Light Fixture for Corrosion Resistant Requirements (Saltwater) - NO LAMPS INCLUDED

LARSON ELECTRONICSSKU: PL3-HALP-48-3L-T8-NL
filler

Price:
Sale price$653.99

Description

Specifications / Additional Information
HALP-48-3L-T8-NL Hazardous Area Light Fixture - No Lamps Ratings/Approvals
UL Listing: United States - Canada Class I Division 2, Groups A, B, C, D
Dimensions: 8.25"W x 52"L x 7"H Class II, Division 2, Groups F, G
Weight: 8 lbs UL 844
Max Wattage (per lamp): 40W UL 1598A Marine Type (Salt water)
Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz California Title 24 Compliant
Tombstones: G13
Compatible Bulb Types T8 and T10 Fluorescent Lamps
Beam Angle: N/A
Mounting: Flange type stainless steel
Wiring Hub: 1/2" or 3/4" threaded Toll Free: 1-800-369-6671
Minimum Operating Temp: -30°C Intl: 1-214-616-6180
Maximum Case Temp: 90°C Fax: 1-903-498-3364
U.L Approval: E-mail: 
Meets US Coast Guard specifications.
' Product Overview '
Made in the USA The HALP-48-3L-T8-NL from Larson Electronics is a Hazardous Area Light Fixture designed to accept T8 and T10 fluorescent or LED lamps. This HAZLOC fixture is approved for use in Class I Division 2 Groups A, B, C and D environments, UL 1598A listed, has a T4C temperature rating and is specifically designed to handle the rigors of wet and corrosive marine environments. The HALP-48-3L-T8-NL does not come with any lamps, but is equipped with G13 tombstones that make it compatible with T8 and T10 fluorescent or fluorescent style LED lamps with a 40W max wattage per lamp. *Please note that NO lamps are included with this unit. This is for the fixture only. The HALP-48-3L-T8-NL hazardous area fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class I Division 2 rated fixture is constructed of non-corrosive materials including a polyester housing reinforced with glass fiber, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion. This fixture is UL 844 rated and Class I Division II, Groups A, B, C, D approved. The HALP-48-3L-T8-NL also carries a UL 1598A outdoor marine rating and meets US Coast Guard specifications.
Click Photo to Enlarge
NOTE ON LAMPS: This fixture does NOT come equipped with any lamps. The HALP-48-3L-T8-NL is equipped with G13 tombstones to make it compatible with operator provided T8 and T10 fluorescent lamps. This fixture is rated for a 40W max wattage per lamp. The HALP-48-3L-T8-NL has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. Standard Flange Brackets: Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide some shock absorbency protection while enabling the user to simply mount the fixture with the through-hole taps that protrude on each side of the fixture. The mounting holes are 36 9/16 inches on center apart along the top of this hazardous location light. The mounting holes are 7 inches on center across the top of the light. Suggested Applications: The HALP-48-3L-T8-NL is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Made in USA Quality
1. Each unit dialectically tested. 2. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface. 3. Fixture housing constructed of glass fiber reinforced polyester. 4. Relamping done via 6 stainless steel snap locking latches, which enable the operator to remove the door and access the lamps. 5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection. 6. 1/2" or 3/4", threaded access hole for wiring conduit.

Shipping and delivery Information

Payment

American Express Apple Pay Bitcoin Bitcoin Cash DAI Diners Club Discover Dogecoin Ethereum Google Pay Litecoin Mastercard PayPal Shop Pay USDC Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed