Hazardous Location Fluorescent Lighting - 4' 4 Lamp Fixture - T8 - 120-277V - Class I Div 2


Sale price$1,889.99


Specifications / Additional Information
HALS-48-4L-T8 Hazardous Location Lighting Ratings/Approvals
Dimensions: 12-3/16"-W x 51-1/2"-L x 5-5/16"-H Class I, Division 2, Groups A, B, C, D
Weight: 45 Lbs Class II, Division 2 Groups F,G
Voltage: Universal 120-277VAC 50/60 Hz Class III
Total Watts: 128 watts NRTL Certified to UL 844
Total Lumens: 11,800 NRTL Certified to UL 1598
Lamp Life Expectancy: 24,000+ Hours IP65
Luminous Efficiency: 92 Lumens per Watt Wet Area Suitable
Color Temp: 4,100K or 5,000K Quick Release Draw Latches & Hinged Lens
Color Rendering Index: 85 Ease-of-Access Front Access Serviceability
Beam Angle: 150° Adjustable Surface Mount Brackets
Operating Temp Range: T3C-T4A Rated Made in the USA
Housing Material: Powder Coated 16 Gauge Steel NRTL Listed for United States & Canada
Lens Material: Tempered Glass Lens
Mounting: Surface Bracket Standard - Pendant Optional
Wiring Hub: 1/2" NPT - (2) On Top, (2) On Ends
  Toll Free: 1-800-369-6671
  Intl: 1-214-616-6180
  Fax: 1-903-498-3364
' Product Overview '
Made in the USA The Larson Electronics HALS-48-4L-T8 Hazardous Area Fluorescent Light Fixture is NRTL Listed for United States and Canada Class I Division 2 Groups A, B, C, D, NRTL Certified to UL 1598, and ideal for use in industrial hazardous locations where wet conditions and chemical/petrochemical vapors may be encountered. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HALS-48-4L-T8 fixture is a 4 foot long, 4 lamp, Class I Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in industrial applications and wet areas. This fixture is T4A temperature rated and comes standard with F32/741 T-8 bulbs. The housing on this unit is constructed of powder coated 16 gauge steel for durability and contains a hinged reflector and ballast tray for easy and safe servicing. The lamps are held in place by spring loaded sockets and protected by a hinged glass door with a 3/16” tempered glass lens which is secured with four turn latches. This fixture is multi-voltage capable and can be operated with voltages of 120-277 VAC. This fixture is IP65 rated water and dust proof and approved for wet and marine locations. This fixture also features multiple 1/2 NPT wiring hubs with two located on top of the fixture and two more located at each end, allowing operators to through-wire multiple units in series or mount the unit with wire through conduit pendant mounts. 
Energy Consumption Comparison
Wattage 216 watts 128 watts 112 watts
Amp Draw @ 120V AC 1.80 amps 1.07 amps 0.93 amps
Amp Draw @ 220V AC 0.98 amps 0.59 amps 0.51 amps
Amp Draw @ 240V AC 0.90 amps 0.54 amps 0.47 amps
Amp Draw @ 277V AC 0.78 amps 0.47 amps 0.40 amps
Amp Draw @ 12V DC 18 amps 10.67 amps 9.33 amps
Amp Draw @ 24V DC 9 amps 5.34 amps 4.67 amps
Lamp Life Expectancy 20,000 hours 24,000 hours 50,000 hours
Operation cost per year (12hs/day @ 12c/kWh) $113.53 $67.28 $58.86
Adjustable Surface Mount Brackets: Two L-brackets enables it to be simply secured to any flat surface. Three through holes provide sufficient mounting for any environment. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be repositioned by removing the adjustment bolts, rotating the fixture, and re-inserting the adjustment bolts in pre-drilled holes. Suspension Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with two 1/2” NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides support for the opposite end of the fixture. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality Lamp Options
1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture housing constructed of white powder coated 16 gauge steel. 4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps. 5. Heavy gauge hinged reflector with high gloss reflective finish. Resists dents and corrosion. 6. Multiple 1/2 inch, threaded NPT access holes for through wiring.  7. Units can be wired end to end in series. F32-T8/841 – 2800 lumens per bulb, 24,000 hours life, 4100 Kelvin color

Shipping and delivery Information

The PuriLite Peace of Mind 30-day money back guarantee


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed