Hazardous Area Fluorescent Light -Emergency Backup Ballast - Class I Div 2 -4' 4 lamp - T5HO


Sale price$3,679.99


Specifications / Additional Information
HALS-EMG-48-4L-T5HO Hazardous Area Ratings
NRTL Listed for United States & Canada Class I Division 2, Groups A, B, C, D
Lamp Type: Fluorescent Class II Division 2 Groups F,G
Dimensions: W-16 3/16" L-51 1/2 " H-5 5/16 " Class III
Weight: 8 Lbs IP65
Voltage:120, 277, 347 & 480 Wet Area Suitable
Total Watts: 216 Watts NRTL Certified to UL 1598
Total Lumens: STD-T5HO Bulbs 20,000 NRTL Certified to UL 844
Luminous Efficacy STD-T5HO Bulbs: 92 Lm/W Switch Leg for Powering Light On/Off
Lamp Life Expectancy STD-T5HO Bulbs: 20,000 Hours
Color Temp: 5000K- T5HO Bulbs
Ambient Operating Temp Range: -30° C to +70° C
Operating Temp Range: T3C-T4A Rated Toll Free: 1-800-369-6671
Battery Backup: 90 Minute Runtime 900 Lumens Intl: 1-214-616-6180
Surface Mounting: Surface Bracket Standard - Pendant Optionals Fax: 1-903-498-3364
Wiring Hub:1/2" threaded - (2) On Top, (2) On Ends E-mail: 
' Product Overview '
Made in the USA The Larson Electronics HALS-EMG-48-4L-T5HO Hazardous Area Fluorescent Light Fixture is NRTL Listed for United States and Canada Class I Division 2 Groups A, B, C and D - NRTL Certified to UL 1598 listed and ideal for use in industrial hazardous locations where wet conditions and chemical/petrochemical vapors may be encountered. ***PLEASE NOTE: ANY FREE SHIPPING OFFERS DO NOT APPLY TO THIS HAZARDOUS LOCATION LIGHT FIXTURE*** The HALS-EMG-48-4L-T5HO fixture is a 4 foot long, 4 lamp, Class I Division 2 Groups A, B, C and D hazardous area fluorescent light and a good choice for use in industrial applications and wet areas. This fixture is T4A temperature rated and comes standard with 4 F54T5HO-850 bulbs. The housing on this unit is constructed of powder coated 16 gauge steel for durability and contains a hinged reflector and ballast tray for easy and safe servicing. The lamps are held in place by spring loaded sockets and protected by a hinged glass door with a 3/16” tempered glass lens which is secured with four turn latches. This fixture is multi-voltage capable and can be operated with voltages of 120, 277, 347 & 480 VAC. This fixture is IP65 rated water and dustproof and approved for wet and marine locations. This fixture also features multiple 3/4" NPT wiring hubs with two located on top of the fixture and two more located at each end, allowing operators to through-wire multiple units in series or mount the unit with wire through conduit pendant mounts. The HALS-EMG-48-4L-T5HO provides operators in hazardous locations with a very durable, reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. This fluorescent light works, mounts and is wired like our HALS-48-4L-T5HO fluorescent light fixtures. The main difference is that we attach an extra Bodine ballast box to the unit that adds emergency light functionality to the fixture. This explosion proof emergency light will run the standard 90 minutes after power is lost. The light recharges the battery once electrical power is restored. Standard configuration includes a single emergency ballast that will run a single lamp at 900 lumens for 90 minutes. For an additional charge, a second ballast can be added to run a second lamp for 1800 total lumens output for 90 minutes. The battery backup unit includes a switched leg for turning the light fixture on/off without kicking the unit into emergency mode. Standard Surface Mount Brackets: Each surface mounting bracket is attached on each end of the light and allows the operator to adjust the angle of the entire fixture. Pendant mounts are available for operators who wish to mount these fixtures away from the ceiling surface. Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Made in USA Quality Lamp Options
1. Each unit dialectically tested. 2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture, where other models may only offer one or three choices. 3. Fixture housing constructed of white powder coated 16 gauge steel. 4. Relamping done via 4 turn latches, which enable the operator to unlatch the hinged door and access the lamps. 5. Heavy gauge hinged reflector with high gloss reflective finish. Resists dents and corrosion. 6. Multiple 1/2 inch, threaded NPT access holes for through wiring.  7. Units can be wired end to end in series. F54T5HO-850 – 54 watt, 5000 lumens per bulb, 20,000 hour life, 5000 Kelvin color (Suffix –T5) 

Shipping and delivery Information

The PuriLite Peace of Mind 30-day money back guarantee


American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed