Made in the USA
The Larson Electronics HALSS-48-2L HazardousÂ Location Fluorescent Lighting Fixture isÂ ETL approved Class 1 Division 2 Groups A, B, C and D -Â 1598A listed and is specifically designed to withstand high vibration locations and the rigors of wet and corrosive marine environments.
The HALSS-48-2L hazardous location fluorescent light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a stainless steelÂ housing, a poured in gasket for reliable sealing and an impact resistant acrylic diffuser. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion.
This fixture isÂ ETL 844 rated and Class 1 Division II, Groups A, B, C, D approved. The HALSS-48-2L also carriesÂ 1598A andÂ 595 outdoor marine ratings and meets US Coast Guard specifications.
This fixture is designed for heavy duty use in applications where intense vibration and corrosive environments may be encountered. Stainless steel construction, high impact acrylic lamp covers, and a Class 1 Division 2Â ETL rating make this light ideal for hazardous locations that require illumination with above average dependability.
NOTE ON LAMPS: This fixture comes equipped with F54-T5/850/HO â€“ 54 Watt lamps producing 5,000 lumens per bulb, aÂ 5000 Kelvin color and a 20,000 hour rated service life. We offer F48-T12/HO â€“ 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color and F32-T8/841 â€“ 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color tubes as lamp options for this fixture. The HALSS-48-2L has an electronic multi-voltage ballast and works with 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ and 277 Volts 60 HZ. 24 Volt models available on request for an additional $100 per unit charge.
Standard Flange Brackets: Stainless steel bracket mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide flexibility in setting the angle of the fixture. Three through holes provide sufficient mounting forÂ any environment.
Suggested Applications:Â The HALSS-48-2L is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This lamp is also ideal for locations where heavy vibratory conditions are present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
|Made in USA Quality
1. Each unit dialectically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Flange type stainless steel mounts attached at each end of the fixture enables it to be simply secured to any surface.
3. Fixture housing constructed of 14 gauge stainless steel..
4. Relamping done via stainless steel snap locking latches which allow the operator to remove the door and access the lamps.
5. Lamp cover-diffuser constructed of high impact acrylic for corrosion resistance and lamp protection.
6. 1/2 inch, threaded access hole for wiring conduit.
F54-T5/850/HO â€“ 54 Watt, 5000 lumens per bulb, 20,000 hours life,Â 5000 Kelvin color
F48-T12/HO â€“ 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color
F32-T8/841 â€“ 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color
F48-T8/HO - 48 watt, 4000 lumens per bulb, 18,000 hours life, 4100 Kelvin color (Suffix -T8HO)