Made in the USA
The Larson Electronics HALSS-EMG-48-2L-LED-BL-EB Hazardous Area LED Light Fixture with Glass Lens and Remote Ballast is ETL approved Class 1 Division 2 Groups A, B, C and D - 1598A listed, and is specifically designed to withstand high vibration locations and the rigors of wet and corrosive marine environments.
The HALSS-EMG-48-2L-LED-BL-EB hazardous area LED light fixture is designed for use in wet areas and saltwater-marine environments where corrosion resistance is critical to equipment longevity and safety. This Class 1 Division 2 rated fixture is constructed of non-corrosive materials including a stainless steel housing, a poured in gasket for reliable sealing and a glass lens. Our LED T series lamps included with this fixture add greater light output, longer lamp life, and add even better resistance to damage from vibration and impacts. Corrosion resistant stainless steel latches secure the lamp cover to the housing and provide a firm lock against the poured in seal to prevent drips and water intrusion.
The fixture will run one lamp at 2750 lumens for 90 minutes after power is lost. The light automatically recharges the battery once electrical power is restored. This fixture is 844 rated and Class 1 Division 2, Groups A, B, C, D approved. TheHALSS-EMG-48-2L-LED-BL-EB also carries 1598A and 595 outdoor marine ratings and meets US Coast Guard Specifications.
This hazardous location emergency light fixture features a remote mount and an external ballast, which includes a remote battery system. The ballast enclosure does not come with this fixture. Customer wiring is required for light and remote mounted ballast connections.
This fixture is designed for heavy duty use in applications where intense vibration and corrosive environments may be encountered. Stainless steel construction, high impact acrylic lamp covers, and a Class 1 Division 2 ETL rating make this light ideal for hazardous areas that require illumination with above average dependability.
We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight, increases lamp life to an extreme 50,000 hours, and helps this LED fixture maintain a T4C temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs, but draw only 3/4 of the current. The current generation of Larson Electronics LED T-series style bulbs produce 15% more light than T8 bulbs. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications.
Standard Flange Brackets:
Stainless steel bracket mounts attached at each end of the fixture enables it to be simply secured to any surface. The mounts provide flexibility in setting the angle of the fixture. Three through holes provide sufficient mounting for any environment.
The HALSS-EMG-48-2L-LED-BL-EB is designed for marine wet and damp locations, where corrosion resistant fluorescent lights are required. This lamp is also ideal for locations where heavy vibratory conditions are present. This includes petrochemical facilities, lubrication pits, oil drilling rigs, crew quarters, solvent/cleaning areas, water treatment areas, processing plants and marine loading docks.
Made in USA Quality
Superior LED Benefits
1. Each unit dielectrically tested.
1. 50,000 hour lifespan.
11. Very good color rendering.
ETL Listing: United States
Dimensions: W-9 1/2" L-54 " H-6 3/4"
Weight: 35 Lbs
Total Watts: 48 watts
Voltage: 120-277 Volts AC 50/60hz, 12-24 Volts DC
Lamp Life Expectancy: 50,000 Hours
Efficiency: 90 Lumens per Watt
Temp Range: T4C Rated -30 C to 85 C
Minimum Operating Temp: -30 C
Beam Angle: 150 degrees
Color Temp: 5300K
Mounting: Flange type stainless steel
Lens Material: Glass
Wiring Hub: 1/2 inch threaded
Maximum Case Temp: 90 C
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.