|LED25WRE-CPR LED Light
|Internal LED Driver Features
|Lamp Type: CREEÂ LED
|Fast average current control
|Dimensions:Â 5.75" x 4.36"
|Programmable off-time switching
|Linear dimming input
|Led Drive %: 90%
|Short Protection w/ Skip Mode
|Voltage: 12-32 V DC
|Ambient Op Temp -40C to +85C
|Spot Beam: 1000` L
|Pin-compatible with the HV9910B
|Lighting Configuration: Combination 10Â° Spot & 60Â° Flood
|Mounting: Adjustable Bracket
|Wiring Options: 16` Cigarette Coil, 16` Cigarette, 21` Ring Terminals, 16` Battery Clamps or 16` Flying Leads
|Amps: 2.08 @ 12V DC - 1.04 @ 24V DC
|LED Light Color: 6000K
|LED Life Expectancy: 50,000 hours
|Materials: Aluminum Housing, Polycarbonate Lens
|Housing Colors: Black or White
|The LED25WRE-CPR LED Spotlight is ideal for a wide variety of uses including equipment, vehicle, military, law enforcement and industrial manufacturing applications. This ultra compact LED light produces anÂ 2750 lumen output with low voltage and amp draw, 50,000 hour service life andÂ 12 toÂ 32 volt compatibility providing operators with a versatile and powerful LED lighting solution. The LED25WRE-CPR LED light emitter from Larson Electronics producesÂ 2750 lumen of bright light while drawing less thanÂ 2.25 amps from a 12 volt electrical system. A single CREE 25 watt LED producing 2750 lumen is combined with high outputÂ reflector to produce aÂ narrow 10 degree spread spot beam approximately 1000â€™ long combined with a 60Â° flood beam. This combination spot and flood beam provides both distance and width from a single light source. This particular unit is ultra compact atÂ 4.5" OD lamp head,Â 5.75 inches tall with mounting bracket, which makes it ideal for applications where electrical power and mounting space is at a premium. The LED WREÂ series LED lights are waterproof to 3 meters, sealed against intrusion by dust and dirt and very ruggedly constructed to withstand the most demanding environments, conditions and applications. TheÂ low profile design, low power requirements, high durability and versatile mounting makes these LED lights ideal for a wide array of applications including but not limited to: military, industrial manufacturing, machine visioning, security and law enforcement, boating, off-roading and commercial structure illumination.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. These LED units contain advanced drivers which use pulse width modulation to control heat buildup rather than simple voltage regulators which are typically harsh on sensitive electronics and can contribute to early LED failure. These units automatically sense the temperature of each LED and adjust the energy frequency or â€œduty cycleâ€ accordingly to maintain heat levels within acceptable ranges. This system in essence flashes current at an extremely fast on and off rate to each LED based upon the LEDâ€™s core temperature. This flash rate is too fast to detect with the human eye, but provides precise control of the current flowing to each LED and thus the heat it generates. This allows the LEDs to be driven at up to 100% capacity without overheating or visible loss of light output. The LEDs are always driven at the same voltage but the duty cycle, however, is changed to alter how long the LEDs are actually on or off. The end result is more light with less heat and longer LED life with an average 70% lumen maintenance after 50,000 hours.
Voltage: These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LEDP WREÂ series LEDÂ lights can operate on current ranging fromÂ 12 to 32VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.
Durability: As well as unparalleled heat control, the LEDP WRE series of LED lightsÂ from Larson Electronics also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
Shipping and delivery Information
Estimated delivery times range from 1 to 3 weeks, depending on your location, the product ordered and stock availability. External factors such as courier network disruptions can also impact delivery timelines. PuriLite strives to ship your purchase in the shortest possible time using industry standard courier services.
For any questions related to shipping and delivery, please call +1-647-254-9757, email us at firstname.lastname@example.org or chat with us by clicking on the chat icon at the bottom right of this page.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.