28W LED Bulb - 47" T8 - 3500 Lumens - Replacement/Upgrade for Fluorescent Lights w/ R17D Sockets

LARSON ELECTRONICSSKU: PL3-LEDT8-28W-V2-R17D
filler

Price:
Sale price$321.99

Description

Specifications / Additional Information
LEDT8-28W-V2-R17D 28 watt T-series Ratings/Approvals
UL Listing: United States Listed for United States and Canada
Lamp Type: LED Tube  UL-1993
Dimensions: 47"L x 1.03"OD CAN/CSA C22.2 No 1993
Weight: 1.35 Lbs (6.14 grams) 125 lm/w efficiency
Voltage: 110 Volts to 277 VAC or 12/24 VDC IP20 Rated
Watts: 28 watts 80% Lumen Retention @ 50,000+ Hours
Total Lumens: 3,500 Internal Driver
Lumens Per Watt: 125
Lamp Life Expectancy: 50,000+ Hours
Beam angle: 150 degrees
Color temperature: 5600K, 5000K, 4500K, 4000K, 3500K, 3000K, 2700K  
Operating Temp: -20°C to +45°C 
Base: Recessed Double Contact (R17d)
 
   
' Product Overview '
The Larson Electronics LEDT8-28W-V2-R17D 28 watt T-series LED tube lamp is an excellent choice for upgrading existing T8 high output fluorescent lamp fixtures with R17D sockets to LEDs as well as a direct replacement for our own LED light fixtures. This 28 Watt T-series LED Bulb works with any T8 fluorescent light fixtures with R17D sockets and requires no ballast for operation. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe environments as there is no glass. The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb. These LED light tubes can also be plugged directly into fluorescent light fixtures with magnetic ballasts, which makes them an ideal retrofit for older T8 fluorescent lights with magnetic ballasts and R17D sockets. LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life. LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps. Wiring: This LED lamp is available in two different wiring configurations; the X1 version and the X2 version. Having two wiring configurations available offers operators a choice to best fit their specific wiring requirements when replacing fluorescent tubes with more efficient LED lamps. The X1 model uses a wiring configuration that has the operator connect both the hot wire and the neutral wire to a single side of the LED lamp. This version utilizes non-shunted sockets which are the type of sockets that are used with dimming and rapid start ballasts. In this configuration, both the hot wire and the neutral wire are connected to the same tombstone on the LED lamp with the other tombstone and lamps base being used for support only and having no live connection. The X1 model is considered to be the safer approach to LED tubes because of the lack of high voltages running through the inside of the heat sink. The X1 version approach also does not present any issues while installing or servicing the lamp. In order to install the X1 model, operators must rewire the fixtures to bypass the existing ballast and to replace the existing tombstones if they are shunted. The X2 model must be wired from both ends of the LED tube with the hot wire connecting to one end and the neutral wire to the other. This is the way that fluorescent tubes are setup within existing fluorescent fixtures which means that the X2 model only requires operators to bypass or remove the existing fluorescent ballast before wiring the replacement LED lamp into the fixture. Voltage: These multi-voltage LED fluorescent bulbs run directly off any voltage ranging from 110 volts to 277 volts AC, including 120 volts, 230 volts, 277 volts, etc. We now offer 12/24 Volt DC LED T-series bulbs as well.
Click Photo to Enlarge
These are the first generation of our 28 watt LED tubes. Lumen output is 125 lumens per watt for a total of 3,500 lumens per bulb. These LED fluorescent tube replacements can be used as upgrades or replacements to our own explosion proof fluorescent lights, explosion proof paint spray booth lights as well as any other T8 light fixture with R17D sockets the operator already has in house. We have specially designed these for our explosion proof light fixtures, however, they can be used as replacements in standard fluorescent light fixtures. In our facilities, we replaced worn or spent fluorescent bulbs with these LED bulbs by removing the ballasts and bringing the hot wire to one end and the neutral wire to the other end of the LED tube.  

Shipping and delivery Information

Payment

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed